You are here: Home » Blog » Industry News » How does the heat pump water heater achieve the effect of saving energy?

How does the heat pump water heater achieve the effect of saving energy?

Views: 0     Author: Site Editor     Publish Time: 2022-06-23      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button
How does the heat pump water heater achieve the effect of saving energy?

More and more people choose heat pump water heatersbecause air energy is the most energy-efficient, that is, the lowest operating cost, compared to most water heaters that consume electricity and gas.

heat pump water heater

How does the heat pump water heater achieve the effect of saving energy?

What should we pay attention to when using heat pump water heater?

What are the operational advantages of heat pump water heaters?


How does the heat pump water heater achieve the effect of saving energy?

When the heat pump water heater is working, the energy QA stored in the ambient medium is absorbed in the evaporator; it consumes a part of the energy itself, that is, the compressor consumes power QB; the heat release QC is carried out in the condenser through the working fluid circulation system, QC=QA+QB, it can be seen that the energy output by the heat pump is the work QB done by the compressor and the heat QA absorbed by the heat pump from the environment; therefore, the use of heat pump technology can save a lot of electric energy.


What should we pay attention to when using heat pump water heater?

temperature, water consumption

Put the bath water in the heat pump water heater. The most suitable water temperature is 42°C. It can be slightly higher by 1-2°C for middle-aged and elderly people. The water for showering is about 40~50 liters per person. Bathtubs and Jacuzzis are determined by capacity.

How much hot water can be made

In terms of product performance and theory, the heat pump water heater can be cycled back and forth to continuously produce hot water. Under normal temperature, the hot water can be produced per hour as follows (45℃-55℃): It depends on the size of the unit.


What are the operational advantages of heat pump water heaters?

The heat pump water heater absorbs the low-temperature heat in the air, vaporizes it through the fluorine medium, and then compresses it through the compressor to heat up and pressurize it. The air energy water heater has the characteristics of high efficiency and energy saving. The same amount of hot water produced is 4-6 times that of the electric water heater. Its annual average thermal efficiency ratio is 4 times that of the electric heating, and the energy efficiency is high.

The heat pump water heater overcomes the shortcomings of solar water heaters that rely on sunlight for heating and inconvenient installation. Since the work of the air energy water heater is to exchange heat through the medium, it does not need the electric heating element to be in direct contact with the water, which avoids the danger of electric water heater leakage, and also prevents the gas water heater from the danger of explosion and poisoning, and more effectively controls the gas Air Pollution Caused by Exhaust Gases from Water Heaters.


Guangdong JNOD New Energy Technology Co., LTD. has focused on the field of heat pump water heaters for many years, it commits to providing perfect service for every customer in the world.


 
Focusing on heat pump& electric boiler R&D, manufacturing and providing comprehensive energy-saving solutions.
Beijing Time

QUICK LINKS

CONTACT US

  WhatsApp: +86-18929970227
  Tel: +86-0757-23617848
  Phone: +86-18929970227
  E-mail: info@jnodenergy.com
Leave a Message
CONTACT US
PRODUCT CATEGORY
CONTACT US
Copyrights  2022 Guangdong JNOD New Energy Technology Co., LTD. All rights reserved  丨  Sitemap 丨 Support By Leadong