Views: 0 Author: Site Editor Publish Time: 2022-05-23 Origin: Site
The heat pump water heater uses a heat pump to absorb the air heat source to produce hot water. The energy saving efficiency is more than 3 times that of the electric water heater. It is more energy efficient than the solar water heater.
What is a direct heat pump water heater?
What are the characteristics of direct heat pump water heaters?
What is the main structure of the direct heat pump water heater?
The direct heat pump water heater is also known as the fast or fast heat pump water heater. The basic characteristics of the direct heat pump water heater are: cold water and superheated water, as long as the tap is turned on, the energy source will continuously supply hot water within a few seconds. Turn off the faucet when you don't need hot water.
According to different heating forms, direct heat pump electric water heaters can be divided into the following three types:
①, bare electric wire heating electric water heater;
②, electric film heating electric water heater;
③, electric heating tube heating electric water heater.
The heater of the direct heat pump water heateris set in a tank frame, which cannot withstand too high water pressure. At the same time, the left and right poles of the tank frame and the two poles introduced by the heating wire will be affected by water pressure for a long time. be damaged. Therefore, direct heating heat pump water heaters cannot be made into the post-system, but are all made into the front-system. In addition, in order to ensure the safe use of direct-heat heat pump water heaters and no dry burning occurs, a pressure sensing activation switch with water flow as a signal is installed at the cold water inlet, and the pressure sensing activation switch diaphragm can withstand the pressure. It is limited and cannot withstand pressure for a long time, so direct heat pump water heaters are generally made into the former system.
A typical direct heat pump water heater is mainly composed of a heating tank plate, a pressure sensor, a power regulator, a water volume adjustment faucet, a water inlet pipe and a water outlet pipe component, among which the heating tank plate is the key component of the direct heat pump water heater. It consists of a groove weight, a sealing ring, a cover and an electric heating element, and the electric heating element is located in the groove of the groove plate.
The direct heat pump water heater works by direct conduction heating. Since the electric heating element is placed in the groove of the groove plate, when the cold water flows through the groove, it can directly flow through the surface of the heating element to be heated. And because the water tank is like a snake, the cold water flowing into the water inlet is gradually heated, and hot water with a higher temperature can be obtained at the water outlet.
Guangdong JNOD New Energy Technology Co., LTD. can produce standard products under clients' brand, modify the products to satisfy client's personalized requirements and work together with clients to design and produce totally new products.
