Publish Time: 2022-07-26 Origin: Site
With the continuous improvement of living standards, there are more and more users of heating and central air conditioning. Central heating users do not need to worry about the choice of equipment, while household heating users need to face a dazzling array of hot and cold equipment, which is difficult to carry out. choose. Heating and Cooling Heat Pumps are constantly entering the public's field of vision, and are sought after by many users because of their environmental protection and energy-saving features. But what else should you know before choosing a Heating and Cooling Heat Pump?
How energy efficient is the Heating and Cooling Heat Pump?
How to save resources when cooling with Heating and Cooling Heat Pump?
How to save resources when heating with Heating and Cooling Heat Pump?
The Heating and Cooling Heat Pumpcan adjust the indoor temperature by absorbing the heat energy in the air and then transferring it to the water for heat exchange. In summer, it is cooled by fan coil unit, and in winter, it is heated by fan coil unit, floor heating or radiator. It has a dual-purpose function. Heating and Cooling Heat Pump can also be connected in areas with better environment. Domestic hot water, and even the water heater are saved.
Heating and Cooling Heat Pumprefrigeration is to cool the circulating water in the pipeline into chilled water through the heat pump unit. The outlet air temperature of the indoor fan coil is between 15°C and 20°C. The chilled water is circulated into the room for heat exchange, and the evaporator The heat absorption in the room transfers the heat in the room to the circulating water in the pipeline, and then the circulating water after the heat absorption is brought to the heat exchanger configured by the heat pump unit through the operation of the water pump for heat exchange, and finally the heat pump host discharges the heat to the air In the cycle, this process is repeated to achieve the effect of indoor cooling. However, it should be noted that after the circulating water in the pipeline is cooled by the Heating and Cooling Heat Pump, the temperature can be kept stable for a long time without heat exchange, and there is no short-term loss of cooling capacity. Energy consumption will also be lower.
Heating and Cooling Heat Pump heating is to replace the collected heat into the heating pipeline through the heat pump unit, and then deliver the water to the floor heating, fan coil and radiator at 35°C-45°C, 40°C-50°C and 55°C respectively. The heat is released in the middle, so as to achieve the effect of indoor heating. Because the air energy heat pump adopts frequency conversion technology and jet enthalpy increasing technology, it has a high energy efficiency ratio, and can obtain more than three times the heat energy from the low temperature environment, and the energy saving performance will be much higher than that of direct conversion of electric energy into heat energy.
After reading, do you have a deeper understanding of Heating and Cooling Heat Pump? For further information, please contact Guangdong JNOD New Energy Technology Co., LTD. They will be very pleased to help you!