Eco Heating And Cooling Heat Pump- Suppliers Factory Manufacturers From China

The working principle of the Heating and Cooling Heat Pump is a mechanical device that forces heat to flow from a low temperature object to a high temperature object in a reverse cycle. The applied low-grade thermal energy is utilized to achieve the purpose of energy saving.

How does the Heating and Cooling Heat Pump perform cooling and heating respectively?

What is the principle of Heating and Cooling Heat Pump?

Why is Heating and Cooling Heat Pump so practical?

How does the Heating and Cooling Heat Pump perform cooling and heating respectively?

When the air conditioner cools down in summer, the Heating and Cooling Heat Pump operates according to the cooling condition, and the high-pressure steam discharged from the compressor enters the condenser through the reversing valve (also known as the four-way valve); when heating in winter, the reversing valve Turn to the working position of the heat pump, so the high-pressure refrigerant vapor discharged from the compressor flows into the indoor evaporator (used as a condenser) after passing through the reversing valve, and the latent heat released when the refrigerant vapor condenses heats the indoor air to achieve indoor heating purposes. The condensed liquid refrigerant flows in the reverse direction through the throttling device into the condenser (used as an evaporator), absorbs external heat and evaporates, and the evaporated steam is sucked by the compressor after passing through the reversing valve to complete the heating cycle. In this way, the Heating and Cooling Heat Pump "pumps" the heat from the outside air (or circulating water) into the room with a higher temperature, so it is called a "heat pump"

What is the principle of Heating and Cooling Heat Pump?

When the air conditioner cools down in summer, it operates according to the refrigeration condition. The high-pressure steam discharged from the compressor by the Heating and Cooling Heat Pump enters the condenser through the reversing valve (also known as the four-way valve), and the refrigerant vapor is condensed into liquid. The flow device enters the evaporator, absorbs heat in the evaporator, cools the indoor air, and the evaporated refrigerant vapor is sucked by the compressor after passing through the reversing valve, and this cycle is repeated to realize the refrigeration cycle.

Why is Heating and Cooling Heat Pump so practical?

Heating and Cooling Heat Pump can operate normally between -27℃-48℃, and some low-temperature air-energy heat pumps are also capable of -35℃ ambient temperature, and still maintain normal operation. In our environment, a It can be used all-weather all year round, and will not be affected too much by rainy, windy and snowy weather, nor will it be affected by low temperature at night. However, solar heating equipment is greatly affected by environmental factors. In the case of insufficient light, it is difficult to achieve the effect of indoor heating, especially in areas with low ambient temperature in winter.

Guangdong JNOD New Energy Technology Co., LTD. provided marketing consultancy services and business solutions for customers from over 40 countries. tailor-make solution of hot water supply base on customer's market demand.

With the widely known advantages of air energy heat pump products such as cleanliness, environmental protection, energy saving, stability and comfort, heating with Heating and Cooling Heat Pump products has become a trend. More and more northern == home users and schools, hotels, hospitals When transforming the original heating system in other places, choose to use Heating and Cooling Heat Pump.

Compared with ordinary central air conditioning refrigeration and gas wall-hung boiler heating, what are the advantages of Heating and Cooling Heat Pump?

What are the advantages of using the Heating and Cooling Heat Pump?

What is the working principle of Heating and Cooling Heat Pump?

Compared with ordinary central air conditioning refrigeration and gas wall-hung boiler heating, what are the advantages of Heating and Cooling Heat Pump?

The common heating and cooling equipment on the market is mainly fluorine system heating and cooling air conditioning or the combination of gas wall-hung boiler heating and central air conditioning refrigeration.

The main advantage of Heating and Cooling Heat Pump compared to ordinary heating and cooling air conditioners is high comfort. The fluorine system heating and cooling air conditioner directly controls the indoor temperature through the flow of the refrigerant, and the refrigerant directly exchanges heat with the air. This heat exchange method has two disadvantages: First, the temperature of the air outlet of the air conditioner is very low or very high (7°C-12°C during cooling, 40°C-50°C during heating), the body feels very bad, and it is bitingly cold in summer. The winter is hot and dry; second, although the fluorine system air conditioner has a relatively fast cooling and heating speed, it will also cause a large amount of moisture in the air to be taken away due to the rapid heating and cooling speed, resulting in excessive indoor dehumidification and drying.

What are the advantages of using the Heating and Cooling Heat Pump?

1) The unit of Heating and Cooling Heat Pump has high energy efficiency ratio, energy saving and electricity saving.

2) The water temperature of the Heating and Cooling Heat Pump is generally constant at 12-22°C, which is 7°C for the water supply in summer, 12°C for the return water, 45°C for the water supply in winter, and 40°C for the return water, and the temperature difference between them is small. , so the unit has less work and more energy.

What is the working principle of Heating and Cooling Heat Pump?

During the operation of Heating and Cooling Heat Pump, the evaporator absorbs heat from the ambient heat energy in the air to evaporate the heat transfer working medium. After the working medium vapor is compressed by the compressor, the pressure and temperature rise. When the high-temperature vapor passes through the special annular pipe bonded on the outer surface of the water storage tank, the condenser condenses into liquid and transfers the heat to the water in the water storage tank of air source heat pump.

Guangdong JNOD New Energy Technology Co., LTD. has focused on the development and production of Heating and Cooling Heat Pumps for several years. And it commits to providing perfect service for every customer from all over the world.

To celebrate 13th Anniversary of JNOD, we organized all of our staff to take a two-day-one-night travel to XiaChuan Island. Our staff,dressed up in customized dark blue clothes, departing with good spirit. We played games, sang songs on the bus. Three hours later after taking bus and boat, we arrived at the scenic spot.

The island has charming scenery. There are natural beaches with excellent sand quality, beautiful islands and bays, strange mountain scenery and stone forests, attractive scenic spots, dense primary secondary forests, animal and plant wonders and a complete variety of seafood treasures.

We have been serving our customers with spirit of hard working and good service for first 13 years. We wish JNOD will be even better and more prosperous in the next 10 years, 20 years and even more!

With the continuous improvement of living standards, there are more and more users of heating and central air conditioning. Central heating users do not need to worry about the choice of equipment, while household heating users need to face a dazzling array of hot and cold equipment, which is difficult to carry out. choose. Heating and Cooling Heat Pumps are constantly entering the public's field of vision, and are sought after by many users because of their environmental protection and energy-saving features. But what else should you know before choosing a Heating and Cooling Heat Pump?

How energy efficient is the Heating and Cooling Heat Pump?

How to save resources when cooling with Heating and Cooling Heat Pump?

How to save resources when heating with Heating and Cooling Heat Pump?

How energy efficient is the Heating and Cooling Heat Pump?

The Heating and Cooling Heat Pumpcan adjust the indoor temperature by absorbing the heat energy in the air and then transferring it to the water for heat exchange. In summer, it is cooled by fan coil unit, and in winter, it is heated by fan coil unit, floor heating or radiator. It has a dual-purpose function. Heating and Cooling Heat Pump can also be connected in areas with better environment. Domestic hot water, and even the water heater are saved.

How to save resources when cooling with Heating and Cooling Heat Pump?

Heating and Cooling Heat Pumprefrigeration is to cool the circulating water in the pipeline into chilled water through the heat pump unit. The outlet air temperature of the indoor fan coil is between 15°C and 20°C. The chilled water is circulated into the room for heat exchange, and the evaporator The heat absorption in the room transfers the heat in the room to the circulating water in the pipeline, and then the circulating water after the heat absorption is brought to the heat exchanger configured by the heat pump unit through the operation of the water pump for heat exchange, and finally the heat pump host discharges the heat to the air In the cycle, this process is repeated to achieve the effect of indoor cooling. However, it should be noted that after the circulating water in the pipeline is cooled by the Heating and Cooling Heat Pump, the temperature can be kept stable for a long time without heat exchange, and there is no short-term loss of cooling capacity. Energy consumption will also be lower.

How to save resources when heating with Heating and Cooling Heat Pump?

Heating and Cooling Heat Pump heating is to replace the collected heat into the heating pipeline through the heat pump unit, and then deliver the water to the floor heating, fan coil and radiator at 35°C-45°C, 40°C-50°C and 55°C respectively. The heat is released in the middle, so as to achieve the effect of indoor heating. Because the air energy heat pump adopts frequency conversion technology and jet enthalpy increasing technology, it has a high energy efficiency ratio, and can obtain more than three times the heat energy from the low temperature environment, and the energy saving performance will be much higher than that of direct conversion of electric energy into heat energy.

After reading, do you have a deeper understanding of Heating and Cooling Heat Pump? For further information, please contact Guangdong JNOD New Energy Technology Co., LTD. They will be very pleased to help you!

During the working process of the heat pump water heater, it consumes 1-part electricity to get the compressor running, and at the same time, it can absorb about 4-part heat from the ambient air and transfer it to the water. Therefore, air energy water heaters can save almost 3/4 electricity compared to electric water heaters. That is, the electric water heater consumes 4 kWh electricity to produce hot water, and the air energy water heater requires only 1 kWh electricity.

What role does the refrigerant play in the unit composition of the heat pump water heater?

What is the physical principle of how a heat pump water heater works?

What is the significance of the appearance of heat pump water heaters?

What role does the refrigerant play in the unit composition of the heat pump water heater?

The heat pump unit contains a special heat-absorbing refrigerant. In the liquefied state, the normal temperature is below minus 20°C. Therefore, there is a temperature difference between it and the outside temperature. The refrigerant absorbs the outside temperature and is stored in the evaporator. Generate pressure and evaporate and evaporate, and through the work of the heat exchanger (heat pump), when the refrigerant is transferred from the evaporated state to the liquefied state, the objectively existing heat is released to the storage water in the water tank.

What is the physical principle of how a heat pump water heater works?

The heat pump water heateruses the heat absorbing medium (refrigerant) in the device to collect heat energy from the air or the natural environment, heats the cold water quickly through the heat exchanger and at the same time releases the cold air, avoiding the lack that conventional solar products can not work in rainy weather and at night. As long as the outside temperature is above 1-15 degrees, it can work normally, so can be more efficient and energy-saving, at the same time does not occupy open space, and is easy to install and flexible to use.

What is the significance of the appearance of heat pump water heaters?

With the rapid development of the economy and the improvement of people's living standards, water heating has become a necessity for people's lives. However, conventional electric water heaters have the disadvantages of large energy consumption, high cost and serious environmental pollution; while the operation of energy-saving and environmentally friendly solar water heaters is also restricted due to weather conditions. The heating principle of the air heat pump is different from that of the conventional solar water heater. The air heat pump uses air, water, solar energy, etc. as a low temperature heat source, and the air heat pump uses the electrical energy as energy to absorb heat from the low temperature side to heat the service water.

Guangdong JNOD New Energy Technology Co., LTD. can provide product certification requirements for local markets; provision of catalogues, technical manuals; exhibit together with customers at leading industrial fairs; Advertise in local market media through our press release resources.

With the continuous improvement of social and economic level, my country's air energy industry has ushered in a period of rapid development, and the scope of application of Swimming Pool Heat Pump products is also expanding. With the advantages of safety, energy saving and constant temperature, Swimming Pool Heat Pump has gradually become a better choice for swimming pools, gymnasiums, bathing centers and other places to solve the problem of constant temperature heating.

How does the Swimming Pool Heat Pump work?

What are the features of Swimming Pool Heat Pump?

Why choose the right Swimming Pool Heat Pump?

How does the Swimming Pool Heat Pump work?

Swimming Pool Heat Pump is a new type of high-efficiency energy-saving constant temperature heating equipment. It is a device that uses a small amount of electricity to drive heat from a low-temperature heat source to a high-temperature heat source based on the basic principle of reversed Carnot cycle. During operation, 1 part of energy is consumed, and 4 parts of energy (heat) are absorbed and transferred from the ambient air to the water, which saves 3/4 of the electricity compared to the water heater.

What are the features of Swimming Pool Heat Pump?

1. Swimming Pool Heat Pump, using advanced titanium alloy heat exchanger, has strong internal corrosion and can resist the erosion of chloride ions in water.

2. Swimming Pool Heat Pump is flexible in design and easy to install: integral design, beautiful and compact unit, small installation area.

3. The Swimming Pool Heat Pump project is easy to install, and the operation and maintenance costs are low.

4. The energy efficiency ratio of Swimming Pool Heat Pump is as high as 5.0, leading the industry.

5. Swimming Pool Heat Pump, using international environmentally friendly refrigerants (R410A/R417A), energy saving and environmental protection, no pollution to the environment.

6.Swimming Pool Heat Pump, super quiet, provide comfortable temperature.

Why choose the right Swimming Pool Heat Pump?

From "heating is too slow", "heating can't keep up with heat dissipation, the constant temperature feeling is useless", and even "the equipment uses electricity and does not dare to open it often", these problems may be caused by the wrong selection of Swimming Pool Heat Pumps. Therefore, when choosing a suitable Swimming Pool Heat Pump for a swimming pool, we must scientifically evaluate the required heating capacity of the swimming pool in the two stages of initial heating and constant temperature, and choose the one with greater demand as the basis for matching selection.

Under normal circumstances, the heating amount in the initial heating stage of the swimming pool will be higher than that in the constant temperature stage. Therefore, the first step in the selection of Swimming Pool Heat Pump is to understand the heating capacity required for the initial heating of the swimming pool.

JNOD has a complete heat pump industry chain, and its products involve Swimming Pool Heat Pump, House Heating & Cooling Heat Pump, Domestic Hot Water Heat Pump, Heat Pump Dehumidifier, Commercial & Industrial High Temperature Water Heating Solution, Industrial and Agricultural Heat Pump Dryer, etc.

Air source heat pump water heaters are the same as the heating principle of air conditioners, they are all heat carriers. The air conditioner moves the outdoor heat into the room, and the air energy water heater moves the outdoor heat to the water tank to heat the cold water in the water tank. Because the heat in the air is free, the air energy water heater also saves electricity.

What is the operating mode and principle of the unit composition of the heat pump water heater?

What are the benefits of installing a heat pump water heater?

What is the difference between a heat pump water heater and an air conditioner?

What is the operating mode and principle of the unit composition of the heat pump water heater?

The heat pump hot water unit is composed of a refrigeration cycle, including two parts: the main engine and the condenser. The main engine part includes evaporator, fan, compressor and expansion valve; the condenser is an incubator with condensing coils inside. The refrigerant absorbs the heat from the outside air in the evaporator and releases heat in the condensing coil through the heat pump cycle to heat the water in the water tank. The thermal insulation layer of the water tank is foamed with closed-cell rubber sponge or polyurethane, and has good thermal insulation performance.

What are the benefits of installing a heat pump water heater?

1. Safety: No gas, no waste gas, and no "gas poisoning"; no electric heating rod for heating, there is no danger of leakage, and people's health and safety are protected.

2. Save money: The COP value is more than 3, the energy efficiency ratio is high, and it definitely saves electricity and money. It can save 2/3~3/4 of electricity expenses, or 1/2~2/3 of gas expenses and auxiliary heating expenses of solar water heaters.

3. Comfort: automatic constant temperature and pressure water supply, never hot and cold when using hot water, hot water has pressure, good comfort. All-weather supply of domestic hot water makes up for the embarrassment of solar energy when there is no hot water available in rainy days, nights, no sunlight, and freezing.

4. Environmental protection: The cold air discharged from the heat pump water heater is beneficial to reduce the room temperature.

What is the difference between a heat pump water heater and an air conditioner?

Comparison of heat pump water heaters and air conditioners: The principle of heat pump water heaters and air conditioners is the same, but the technical content of heat pump water heaters is higher than that of air conditioners, which is why heat pump water heaters have only been listed in recent years. In general, heat pump water heaters are the product of the development of science and technology to a certain stage. The heat dissipation temperature of the air conditioner cannot work in an environment where the cooling temperature is 40~50°C, and the water temperature of the heat pump water heater can reach about 60°C or even higher.

Guangdong JNOD New Energy Technology Co., LTD., which has been established for several years, focuses on the production of heat pump water heaters. Here, you can find the heat pump water heaters you need.

In recent years, the potential energy of the sports industry under the national fitness, and favorable policies such as swimming into the high school entrance examination sports, the constant temperature swimming pool was once in short supply, and the Swimming Pool Heat Pump was out of stock.

What is the first stage of the workflow of Swimming Pool Heat Pump?

What is the second stage of the workflow of Swimming Pool Heat Pump?

What should we pay attention to when using Swimming Pool Heat Pump?

What is the first stage of the workflow of Swimming Pool Heat Pump?

In the first step, the indoor hot and humid air in the swimming pool first exchanges heat with the outdoor fresh air through the heat exchanger to become warm and humid air, and then the warm and humid air flows through the evaporator, the temperature drops, and the water vapor condenses into cold water droplets and is separated from the air. Make the air dry and realize the function of air dehumidification; at the same time, the heat energy (latent heat and sensible heat) is released in the process of air cooling, water vapor condensation and cooling are absorbed by the refrigerant.

What is the second stage of the workflow of Swimming Pool Heat Pump?

In the second step, the heat energy absorbed by the refrigerant first (latent heat) heats the pool water through the heat exchanger to realize the pool water heating function: the residual heat (sensible heat) passes through the air condenser to heat the cooled indoor air to realize the air insulation function. In the severely cold winter, when the energy available for the heat pump to extract in the air is too small, and the heat energy recovered by the heat pump is not enough to meet the requirements of the indoor air temperature, the auxiliary air heater is added to supplement the heat energy required for the indoor hot air. The Swimming Pool Heat Pump only needs to provide its own operating power, that is, it runs continuously according to the above working procedures, and achieves a harmonious balance of the three functions of pool water heating, air conditioning and dehumidification with low energy consumption.

What should we pay attention to when using Swimming Pool Heat Pump?

1. When maintaining and cleaning the Swimming Pool Heat Pump, make sure that the Swimming Pool Heat Pump is in a power-off state. In addition, when the heat pump is not in use: the power supply should also be cut off.

2. Do not use gasoline, Tianna water, volatile oil, solvents and other chemicals, or liquid pesticides on the Swimming Pool Heat Pump, otherwise it may cause parts to crack and deform.

3. The area around the Swimming Pool Heat Pump should be kept dry and well ventilated.

4. Regularly clean the air-side heat exchanger to maintain a good heat exchange effect. If the shutdown time is long, the water in the pipeline of the unit should be drained, the power supply should be cut off, and the protective cover should be put on. When it is necessary to use it again, the system must be thoroughly checked before turning it on.

After reading, do you have a deeper understanding of Swimming Pool Heat Pump? For further information, please contact Guangdong JNOD New Energy Technology Co., LTD. They will be very pleased to help you.

Adhering to your tenet of quality 1st, purchaser supreme for Hot Water Heater With Heat Pump, Solar Heated Pool , Solar Pool Heater Panels , Air To Water Heat Pump Baseboard , Solar Above-Ground Pool Heater . If you are fascinated in any of our products, you should come to feel no cost to

With years of experience in production Wifi Heating And Cooling Heat Pump, Guangdong JNOD New Energy Technology Co., LTD. can supply a wide range of Wifi Heating And Cooling Heat …

CHECK OUT BEST HEAT PUMP WATER HEATERS 9.5KW to 24.5KW Monoblock Top Discharge Air Source Heat Pump Hot Water Heater 42KW-68KW Low Cost Hot Water High …

DC Inverter Swimming Pool Heat Pump Inquire Add to Basket Product Description Technical Specification Features R32 refrigerant, less GWP than R410A, environmental friendly Anti-UV ABS casing Reliable performance with multi-protections Titanium heat exchanger, corrosion resistant Integrated controller with WiFi smart control

A heat pump for simultaneous heating and cooling (HPS) is a refrigeration machine by which the productions of heating and cooling energies are simultaneously valorized.

2016-8-17 · Heat Pump Grants 2022

10P pool machine EVI pool indoor and outdoor constant temperature 28-38 degree pool heat pump Technology Specification: Packaging

Hotel Heat Pump Water Heater (19472 products available) 1/6 Water Heater Heatpump Nulite R410a Evi Air To Water Heat Pump Heating 15kw 18kw 20kw Air Source Heatpump Water …