Heat Pump Hot Water Heater agent- Suppliers Manufacturers Factory From China

The hot water produced by the heat pump water heater is directly sent to the user through the circulation system as hot water supply or small area heating is carried out by using the fan exhaust pipe. Air source Heat Pump Hot Water Heater is currently the best solution for large, medium and small hot water centralized supply systems in school dormitories, hotels, bathing centers and other places.

Why choose Heat Pump Hot Water Heater?

Where is the better place to install the main unit and water tank of the Heat Pump Hot Water Heater?

What is Heat Pump Hot Water Heater?

Why choose Heat Pump Hot Water Heater?

1. Safety

The Heat Pump Hot Water Heater has the potential safety hazard of leakage, and the gas water heater has the danger of gas poisoning. Compared with these two water heaters, the air energy water heater exchanges heat through the medium, which avoids the direct contact between the electric heating element and the water, which solves the problem. Second, because the raw material of Heat Pump Hot Water Heater is air, it also eliminates the possibility of gas explosion or gas poisoning in gas water heaters, allowing people to use it more comfortably and worry-free.

2. Environmental protection

Energy saving and environmental protection complement each other, and environmental protection is another plus point of Heat Pump Hot Water Heater in its energy saving advantages. First of all, the air energy water heater uses electric energy to compress air to produce heat energy, and does not emit waste gas and toxic gas, which is not only safe, but also creates a pollution-free bathing environment. Secondly, the use time of Heat Pump Hot Water Heater is as long as 15-20 years. The long lifespan can not only reduce the cost and trouble for people to replace the water heater, but also reduce waste production in a sense, which is also an important aspect of environmental protection. aspect.

Where is the better place to install the main unit and water tank of the Heat Pump Hot Water Heater?

Answer: The Heat Pump Hot Water Heater is the best choice to install it on the balcony or bay window. The advantage is that it does not occupy indoor space, it is safe and stable, and the entire hot water piping system will have sufficient hot water; the host is installed in a ventilated and sunny place. it is good. Bay windows or wall hangings can allow the host to absorb heat from the air as much as possible to improve heating efficiency. It is understood that more than 90% of users will choose this installation method.

What is Heat Pump Hot Water Heater?

All-in-one Heat Pump Water Heaters and Split Type Heat Pump Water Heater are included in this hot water series, both on/off and inverter is available. Eco-friendly R32 and R410A refrigerant are adopted, as well the world famous Mitsubishi compressor. This series is widely used in residential and commercial hot water projects.

JNOD insisted on developing with technology innovation, it possessed of several national famous technicians and had invented multiply product patents. The company has been strictly implement the ISO international quality management system, and the products are of reliable guaranteed quality.

In this era of carbon neutrality and carbon peak, people began to understand the concept of environmental protection and began to implement environmental protection policies, such as the use of environmentally friendly and energy-saving products in life, etc. Even the swimming pool water treatment industry has paid more attention to the environmental protection and energy-saving performance of Swimming Pool Heat Pump.

What are the structural features of the Swimming Pool Heat Pump?

Why is Swimming Pool Heat Pump a cost-effective choice?

Why do Swimming Pool Heat Pumps need an anti-condensation system?

What are the structural features of the Swimming Pool Heat Pump?

1. In line with environmentally sustainable development strategy

Swimming Pool Heat Pump adopts environmentally friendly R407C refrigerant fluorine-free system, which saves energy and reduces emissions, and uses free green energy without pollution.

2. Plasma sterilization, 360 purify air

The Swimming Pool Heat Pump can choose the original plasma sterilization and purification technology, which actively generates a large number of active hydroxide ions, surrounds and adsorbs the bacteria and destroys the protein structure on the surface of the bacteria, so as to achieve the effect of sterilization and purification.

Why is Swimming Pool Heat Pump a cost-effective choice?

Box structure of Swimming Pool Heat Pump, independent and beautiful

The panel is made of GI galvanized steel material, embedded with polyurethane (PU) fire-proof, sound-insulating and heat-insulating material, and the inside and outside are sprayed with anti-corrosion spray; , The refrigerant compression system accessories are separated from the air duct system of the heat pump independently to avoid corrosion by ammonia-containing air, ensure a longer service life of the heat pump, and facilitate disassembly and maintenance.

Swimming Pool Heat Pump has multiple system protection

①Pressure protection: high pressure protection, low pressure protection, water filling protection;

②Temperature protection: Excessive exhaust temperature protection, compressor overcut protection, hot water temperature protection

③ Power protection: lack/reverse phase protection, compressor overload protection.

Why do Swimming Pool Heat Pumps need an anti-condensation system?

① The anti-condensation sensor of Swimming Pool Heat Pump can avoid condensation and condensation on the inner surface of indoor glass windows and walls. When the temperature at the indoor anti-condensation dew point is too low, the anti-condensation sensor installed in the place will fed back the information to the unit control system so that the unit can re-adjust the indoor relative humidity, so that the temperature here is higher than the dew point temperature to prevent condensation.

② If there are parts that are particularly prone to condensation and condensation in the swimming pool space, the Swimming Pool Heat Pump can be equipped with a special anti-condensation and condensation system to ensure that the temperature of the condensation-prone parts of the swimming pool is above the dew point temperature.

JNOD has a complete heat pump industry chain, and its products involve Swimming Pool Heat Pump, House Heating & Cooling Heat Pump, Domestic Hot Water Heat Pump, Heat Pump Dehumidifier, Commercial & Industrial High Temperature Water Heating Solution, Industrial and Agricultural Heat Pump Dryer, etc. The ultra-low temperature EVI heat pump has been widely used, too.

The heat pump water heater is almost the same as the cooling principle. A good heat pump system design can utilize the cold and hot ends of the refrigeration system at the same time, that is, in hot summer, the indoor is refrigerating, while the outdoor condenser is heating hot water.

What is the purpose of the heat pump water heater?

What are the performance advantages of heat pump water heaters?

What should be paid attention to in the installation of heat pump water heater?

What is the purpose of the heat pump water heater?

heat pump water heater integrates various functions such as hot water supply, heating, dehumidification, cooling, and air filtration:

No matter the weather, rain or snow all year round, the eat pump water heater automatically provides hot water 24 hours a day without interruption;

eat pump water heater High-efficiency dehumidification, the maximum dehumidification capacity is 6~8 kg in 24 hours a day, and the effect is obvious in rainy and rainy weather;

eat pump water heater filters indoor air, and the effect is more obvious when installed in the kitchen.

eat pump water heater With additional heating accessories, it can heat up the room by more than 5°C in winter, making learning, entertainment and sleeping more comfortable. No matter it is cloudy, sunny, day or night, as long as there is air, hot water can be produced. At room temperature, 180L of hot water can be produced per hour.

What are the performance advantages of heat pump water heaters?

1. It is safe enough, water and electricity are separated, no danger, it is heated by the heat of air, and it is highly technological. Other water heaters have certain risks. heat pump water heaters are completely safe, protecting the lives of family members and providing comfortable hot water.

2. Economical enough, heat pump water heater is used in winter, about 1~1.5 kWh of electricity a day, enough for a family of 4~5 people, generally 4~5 people, at least 3~4 kWh of electricity a day.

3. Enough to enjoy, the heat pump water heater can have 24 hours of comfortable hot water, and it is a 24-hour constant temperature, which can be used immediately after opening, saving a lot of time for boiling water and avoiding accidents.

4. It is fashionable enough. The exterior of the heat pump water heater is very good-looking. At first glance, it makes people feel high-end and fashionable.

5. It is convenient enough, the heat pump water heater can be operated by iphone to control the temperature, or it can be controlled by the touch screen of the machine, which is convenient and fast.

6. Comfortable enough, the heat pump water heater has the function of air-conditioning in the kitchen, which solves the problem of hotness in the kitchen and enjoys the sense of accomplishment when cooking.

What should be paid attention to in the installation of heat pump water heater?

With drainage facilities:

When installing the heat pump water heater, condensed water will be discharged during use, so the installation location must have drainage facilities such as floor drains and gutters.

Instrument installation location:

The instrument, that is, the control panel, needs to be installed nearby to avoid rain; since most of the operation modes choose "economy mode", the control panel is rarely operated, and it is not necessary to install it in a very conspicuous position. Install.

Water pipe arrangement:

The inlet and outlet pipes of the heat pump water heater are preferably 25PPR pipes.

JNOD insisted on developing with technology innovation, it possessed of several national famous technicians and had invented multiply product patents. The company has been strictly implement the ISO international quality management system, and the products are of reliable guaranteed quality.

Winter has arrived, and people tend to use heat pumps as heating machines. If the heat pump unit can be installed reasonably, the service life and heating capacity of the heat pump will be improved. Let Jnod tell you how to install it, see below:

1. Unit installation location planning

1) The installation requirements of the heat pump main unit are similar to the installation requirements of the outdoor unit of the air conditioner. It can be installed on the roof, balcony, and ground. The air outlet should avoid the windward direction.

2) The distance between the main unit (wind from the side) and the surrounding walls or other obstructions should not be too small. There should be no obstructions within 1 meter of the air outlet, and ensure that the heat exhaustion and suction of the heat exchanger are not hindered.

3) There should be no obstructions within 1 meter of the air inlet of the main unit (top air outlet), and no obstructions within 2 meters of the air outlet to ensure that the heat exhaustion and suction of the heat exchanger of the main unit are not hindered.

When the unit is installed under the eaves or there are horizontal obstacles above the unit, the installation location of the unit must be in a well-ventilated place, otherwise it is easy to short-circuit the air flow, resulting in poor heat dissipation capacity of the unit.

2. Unit installation environment control

1) Try not to place it in direct sunlight.

2) Not on the window sill of the bedroom or near the bedroom.

3) There is enough distance between the air inlet and outlet to facilitate heat dissipation.

4) Places that can withstand more than 2-3 times the weight of the outdoor unit.

5) A place where there is no oily smoke or other corrosive gas.

6) A place that does not affect other factors or the environment.

Heat pump water heatersare "heat transfer" devices that use the principle of refrigeration to absorb heat from the air to heat water. A refrigerant with a boiling point of more than minus 10°C is passed into the exchanger, and the refrigerant absorbs heat from the air by evaporating from liquid to gas.

What is the safety of the use of heat pump water heaters?

What is the output of the heat pump water heater?

Where is the convenience of heat pump water heater?

What is the safety of the use of heat pump water heaters?

The heat pump water heater does not require sunlight, so it can be placed at home or outdoors. After the water stored in the solar water heater is used up, it is difficult to produce hot water immediately. If the electric heating takes a long time, as long as there is air and the temperature is above minus 20 degrees Celsius, the heat pump water heater can be under pressure 24 hours a day. run. In this way, even if one tank of water is used up, the air source water heater will produce another tank of hot water in about an hour or even less time. At the same time, the heat pump water heater can also fundamentally eliminate the safety hazards such as electric water heater leakage, dry burning and harmful gas generated when the gas water heater is used.

What is the output of the heat pump water heater?

The water output is large. The water tank capacity of the heat pump water heater is between 150L-760L. Users can choose the corresponding capacity of the air energy water heater according to the needs of the family. Water, bath water, etc., truly realize the central hot water for the whole family and improve the quality of life of users. But be aware that heating at extremely low temperatures with a heat pump water heater is more difficult and may waste electricity, and the water tank needs to take up the heating space.

Where is the convenience of heat pump water heater?

Long life

The life of heat pump water heater is generally 10 years (here for reference), which is longer than 6 years for gas water heaters and 8 years for electric water heaters. The advantages of air source water heater life can reduce the frequency of replacement water heaters, the trouble of installation, and save a lot of money.

Central hot water

Consumers often need hot water in their daily lives, but without hot water sources, they usually boil a pot of water for use. The heat pump water heater has a central hot water function. It stores the heated water in the heat preservation water tank, and there is a comfortable and constant temperature hot water as long as you press the tap. The hot water of the air energy water heater can be used in the whole family, fully meeting the domestic hot water demand of consumers.

Guangdong JNOD New Energy Technology Co., LTD. has focused on the field of heat pump water heaters for many years, it has attracted a large number of consumers around the world with its high-quality products, appropriate prices, and excellent services.

The heat pump water heater uses a heat pump to absorb the air heat source to produce hot water. The energy saving efficiency is more than 3 times that of the electric water heater. It is more energy efficient than the solar water heater.

What is a direct heat pump water heater?

What are the characteristics of direct heat pump water heaters?

What is the main structure of the direct heat pump water heater?

What is a direct heat pump water heater?

The direct heat pump water heater is also known as the fast or fast heat pump water heater. The basic characteristics of the direct heat pump water heater are: cold water and superheated water, as long as the tap is turned on, the energy source will continuously supply hot water within a few seconds. Turn off the faucet when you don't need hot water.

According to different heating forms, direct heat pump electric water heaters can be divided into the following three types:

①, bare electric wire heating electric water heater;

②, electric film heating electric water heater;

③, electric heating tube heating electric water heater.

What are the characteristics of direct heat pump water heaters?

The heater of the direct heat pump water heateris set in a tank frame, which cannot withstand too high water pressure. At the same time, the left and right poles of the tank frame and the two poles introduced by the heating wire will be affected by water pressure for a long time. be damaged. Therefore, direct heating heat pump water heaters cannot be made into the post-system, but are all made into the front-system. In addition, in order to ensure the safe use of direct-heat heat pump water heaters and no dry burning occurs, a pressure sensing activation switch with water flow as a signal is installed at the cold water inlet, and the pressure sensing activation switch diaphragm can withstand the pressure. It is limited and cannot withstand pressure for a long time, so direct heat pump water heaters are generally made into the former system.

What is the main structure of the direct heat pump water heater?

A typical direct heat pump water heater is mainly composed of a heating tank plate, a pressure sensor, a power regulator, a water volume adjustment faucet, a water inlet pipe and a water outlet pipe component, among which the heating tank plate is the key component of the direct heat pump water heater. It consists of a groove weight, a sealing ring, a cover and an electric heating element, and the electric heating element is located in the groove of the groove plate.

The direct heat pump water heater works by direct conduction heating. Since the electric heating element is placed in the groove of the groove plate, when the cold water flows through the groove, it can directly flow through the surface of the heating element to be heated. And because the water tank is like a snake, the cold water flowing into the water inlet is gradually heated, and hot water with a higher temperature can be obtained at the water outlet.

Guangdong JNOD New Energy Technology Co., LTD. can produce standard products under clients' brand, modify the products to satisfy client's personalized requirements and work together with clients to design and produce totally new products.

Swimming Pool Heat Pump is used to maintain the temperature of swimming pool water. Swimming Pool Heat Pump, because the indoor swimming pool generally maintains the water temperature at 26℃~28℃ and the air temperature at 28℃~30℃ (the air temperature is 1℃~2℃ higher than the water temperature).

What is the reason for the continued popularity of the Swimming Pool Heat Pump?

Why is Swimming Pool Heat Pump in demand?

What metrics should be considered for Swimming Pool Heat Pump?

What is the reason for the continued popularity of the Swimming Pool Heat Pump?

Not only swimming pools, but also from hotels to fitness clubs, heated swimming pools are becoming more and more indispensable, and the power consumption of constant temperature heating equipment has become one of the power consumption concerns of swimming pool owners, and its operating cost should not be underestimated.

Faced with the phenomenon that the market is in short supply, for many swimming pool owners who are eager to generate income, how to improve the energy efficiency utilization rate of the swimming pool constant temperature heat pump, ensure the efficient operation of the swimming pool in the low temperature climate, extend the popularity to the four seasons, and realize the full swimming pool. Annual business has become a key upgrade direction.

Why is Swimming Pool Heat Pump in demand?

Since the water temperature of indoor swimming pools is generally kept at 26°C~28°C, and the air temperature is kept at 28°C~30°C (the air temperature is 1°C~2°C higher than the water temperature), for lighting needs, the walls are mostly glass walls or glass structures. Because the pool water contains a lot of chlorine, with the continuous evaporation of the water in the pool, the air humidity is high, and the humid air causes a lot of condensation on the walls or glass, which is bound to cause strong corrosion to the interior decoration of the building. In addition, because humid air contains a large number of viruses, bacteria and other elements that reduce air quality, it can make it difficult for people to breathe, so indoor swimming pool temperature and humidity control are getting more and more attention. Swimming Pool Heat Pump has also attracted the attention of consumers.

What metrics should be considered for Swimming Pool Heat Pump?

Swimming Pool Heat Pump considers indoor air quality, and the constant temperature heat removal pump unit is equipped with fresh air treatment function and exhaust air function.

Swimming Pool Heat Pump considers the operating cost of the constant temperature heat removal pump unit. In the spring and autumn, a large amount of outdoor low-humidity fresh air can be used to adjust the humidity of the indoor air to reduce the operating cost.

In order to prevent the circulating air from affecting the service life of the equipment, the key components and sheet metal structure of the Swimming Pool Heat Pump are treated with anti-corrosion during the manufacturing process, and the compressor, power distribution cabinet and control system are isolated from the wind system.

After reading, do you have a deeper understanding of Swimming Pool Heat Pump? For further information, please contact Guangdong JNOD New Energy Technology Co., LTD.

Air heat pump water heater has low energy consumption (power consumption saves more than 2/3 compared to conventional electric water heaters), high thermal efficiency (heating speed is four times higher than conventional electric water heaters), Environmental protection and energy saving (reduces more than 2/3 compared to conventional electric water heaters) carbon dioxide emissions).

What are the differences between heat pump water heaters and air conditioners?

Why do heat pump water heaters improve the consumer experience?

What is the working process of the heat pump water heater?

What are the differences between heat pump water heaters and air conditioners?

The operating mode of the heat pump water heater is very different from that of the air conditioner, which determines the difference in the design concept between the heat pump compressor and the air conditioner compressor. Trouble-free, long-term stable operation of heat pump water heaters Compared to air conditioning systems, there is a big difference in the operating time. The operating time of heat pump water heater systems is much longer than that of air conditioning systems. The operating time of a heat pump water heater depends on the following factors: Air conditioning systems are often used in summer, but water heaters are mass-produced and run particularly long in winter. The time for heating a water tank in winter is several times as long as in summer, so it is necessary to confirm the operating mode of the heat pump water heater in winter.

Why do heat pump water heaters improve the consumer experience?

According to statistical calculations, 2/3 of the service life of the heat pump water heater is consumed in winter. Since the water outlet temperature of the heat pump is over 55°C, the temperature of the water tank decreases when using. The liquefaction temperature is the main factor affecting the service life of the compressor. Under the condition of simultaneous operation, the total load of the compressor in the heat pump water heater is much higher than that of the compressor in the air conditioning system. The main motivation for consumers to buy water heaters with heat pump is energy saving and comfort. Consumers will thus consume more water, which also extends the working time of the heat pump. If the heat pump water heater is used for heating and service water applications, it can run for a long time during the heating period. From the combination of the above factors, it is evident that the main motor of the heat pump water heater will develop in the direction of miniaturization, and the actual operating time will be greatly extended.

What is the working process of the heat pump water heater?

A water heater with compression heat pump mainly consists of evaporator, compressor, condenser and expansion valve. Thermal Circular Process Throttling → Re-evaporation, whereby heat from the environment is transferred to the water.

Guangdong JNOD New Power Technology Co., LTD. sales team has extensive experience in overseas markets. We provide sincere and professional services, including OEM/ODM/project services, technology support, market analysis, use of design and assembly of installation. We have provided marketing consulting services and business solutions to customers from over 40 countries.

Contact us for all Thermann prices and any other advertised heat pumps water heater …

Air-cooled scroll chiller and heat pump in the split version, equipped with full inverter technology and R-32 refrigerant Heating capacity: 21 - 64 kW Cooling capacity: 21 - 64 kW Refrigerant: R-32 Explore Get Quotation EWYT-CZ Air-cooled scroll chiller and heat pump equipped with full inverter technology and R-32 refrigerant

2022-5-24 · This paper describes heat pump plants for heating and cooling of three different hotels in Norway. The heat pumps were mainly installed to cover cooling demands in summer. However, they were also able to cover most of the hotels’ heat demands. Throughout the year, there is a constant demand for hot tap water which can also mean long operation

2022-11-5 · Swimming pool heat pump Water tank Special heat pump Swimming pool heat pump Brand: Luckingstar Description: It is suitable for supply hot water and heating of family, villa, apartment, hotel, factory, school and hospital etc. in city and village. Product features: Eco-Friendly,ennery-saving,Power off memory,Auto defrosting,Intelligent control

As a heat pump ages, it can lose its efficiency or fail, leading to its eventual replacement. When you are faced with replacing your heat pump, look no further than Holliday Heating Cooling as we have been providing quality heat pump solutions to the Spokane area for over 30 years. Our Comfort Advisors will work with you to find the best heat ...

2022-11-3 · Advantage 1.Excellent outlook design wins high appreciation 2.Compact structure and good demonstrability 3.Patented 100% titanium Heat exchanger in PVC

JIADELE DC inverter thermostat water heating 13kw swimming pool heat pump Outdoor Pool Heat Pump More > USD495.00 - USD678.00 Multi-function Heat Pump JIADELE Split System Air Source Multifunctional Heat Pump and solar water heating combined More > USD1,000.00 - …

R32 MiniAbove Ground PoolHeater Air Source HeatPumpSwimmingPoolHeatPumpwith Plug