Heat Pump Hot Water Heater factory price- China Suppliers Manufacturers Factory

In the Heating and Cooling Heat Pump structure, the refrigerant directly exchanges heat with the air to be treated, without secondary heat exchange in the middle, which reduces the intermediate heat exchange links, which can effectively reduce the energy consumption of the system and improve the heat exchange efficiency.

What is the technological advancement of Heating and Cooling Heat Pump compared to traditional air conditioners?

Where can Heating and Cooling Heat Pump be used?

Why does Heating and Cooling Heat Pump become the choice of more and more consumers?

What is the technological advancement of Heating and Cooling Heat Pump compared to traditional air conditioners?

The refrigeration principle of the traditional air conditioner is to use the change of the physical state of the refrigerant. The change from the gaseous state to the liquid state will emit heat, and the change from the liquid state to the gaseous state will absorb heat. The "reverse Carnot" cycle used for Heating and Cooling Heat Pump is opposite to the refrigeration principle of traditional air conditioners. Using a "four-way electromagnetic reversing valve", a refrigeration cycle or a heating cycle can be realized, so that the car can get cold or hot air. . In the cycle of air-conditioning refrigerant, a large amount of heat will be released during the process of liquefying high-temperature and high-pressure gas into high-pressure liquid in the condenser, which is the principle of heat pump heat release. In winter, the reversing valve can be used to change the flow direction of the air-conditioning refrigerant. At this time, the evaporator acts as a condenser to release heat in the reverse cycle, forming a "heat source". At this time, only a small amount of electricity is consumed, and a large amount of heat from the outside can be transported and "pumped" into the pure electric vehicle to become a heat pump. However, the heating effect of heat pumps in low temperature environments needs to be improved.

Where can Heating and Cooling Heat Pump be used?

The heating principle of Heating and Cooling Heat Pump is completely different from that of traditional solar water heaters. Air source heat pumps use air, water, solar energy, etc. as low-temperature heat sources. The hot water is directly sent to the user through the circulation system as hot water supply or small area heating using fan coil units. Heating and Cooling Heat Pump is the best solution for large, medium and small hot water centralized supply systems in school dormitories, hotels, bathing centers and other places.

Why does Heating and Cooling Heat Pump become the choice of more and more consumers?

Heating and Cooling Heat Pump is one of the most advanced energy utilization products in the world today. With the rapid development of the economy and the improvement of people's living standards, hot water for domestic use has become a necessity for people's lives. However, traditional water heaters (electric water heaters, fuel-fired water heaters, and gas water heaters) have disadvantages such as high energy consumption, high cost, and serious pollution; The operation of energy-saving and environmentally friendly solar water heaters is restricted by meteorological conditions.

After reading these words, do you have a interest to order an Heating and Cooling Heat Pump ? If necessary, you can contact Guangdong JNOD New Energy Technology Co., LTD., which is an advance Heating and Cooling Heat Pump Manufacturer.

Swimming Pool heat pumps are one of the most cost efficient heating options on the market. The start-up costs can be somewhat expensive but they are highly energy efficient while offering advanced heating technology. Swimming Pool heat pumps pay for themselves after just a couple of seasons via the savings you'll see on your utility bills.

Swimming Pool Heat Pump Benefits

Reliable and durable heat pumps require fewer repairs than gas heaters.

No emissions and low electrical use make heat pumps the eco-friendly pool heater.

Heats for much lower costs, costing 50-75% less than gas heaters to operate.

How Swimming Pool Heat Pumps Work:Swimming Pool heat pumps leverage a combination of air and electricity to heat your pool water. They use electricity to power a fan and a small compressor, to absorb surrounding air heat and transfer it into your pool’s water. Pool heat pumps require very little electricity to run.

Swimming Pool Heat Pump Installation: Heat pumps can be purchased, placed level and plumbed after the filter by any handy homeowner, but we recommend an electrician to come in for the power hook-up.

Swimming Pool Heat Pump Operation Cost: The cost to operate a heat pump depends on many factors such as size of Swimming pool, size of heat pump and the outside air temperature. When the air temperatures are colder, the fan and compressor must run longer to maintain temperature, but during warmer periods the heat pump may need to run only an hour per day to maintain water temperature.

For the swimming pool heat pump, we have both R32 and R410A model. The heating capacity can be made from 3KW to 97.5KW. ON/OFF and inverter model,residetial and commercial are available. It’s with 4 ways valve,provide both heating and cooling mode to create more possibility for pool enjoyment.

If you want to know more information, please feel free to contact us.

How time flies, the first quarter of 2022 will soon pass. Do you have any new plans for your business? JNOD has developed some new creative products including electric boiler, heat pump and water heaters. In order to thank new and old customers, we will hold an Alibaba online live stream show on March 11, from 8:00-10:00 pm Beijing time. Big discount and promotions are available during the show time. Welcome to join us.

Here's the link to watch our show：

https://www.alibaba.com/live/promotions-for-newly-developed-boiler-and_139230dd-0e7d-4ea5-8f6a-e91d94aa08fa.html?referrer=SellerCopy

Heating and Cooling Heat Pump has the characteristics of comfort, energy saving, stability, environmental protection, safety, long service life, wide application range and one machine dual use in actual use, which makes Heating and Cooling Heat Pump more popular,favored by users.

What are the advantages of Heating and Cooling Heat Pump?

Why are more and more consumers choosing Heating and Cooling Heat Pump?

What installation conditions are the Heating and Cooling Heat Pump suitable for?

What are the advantages of Heating and Cooling Heat Pump?

1. Safe operation and environmental protection

Heating and Cooling Heat Pump adopts the form of heat pump heating, water and electricity are completely separated, no coal or natural gas is needed, and it will not pollute the environment, and there is no need to worry about the leakage of refrigerant to pollute the environment.

2. Flexible and unlimited use

Heating and Cooling Heat Pump Compared with solar, gas, water ground source heat pumps, air source heat pumps are not limited by geology and gas supply, and are not affected by bad weather such as night, cloudy, rain and snow, so they can Realize safe operation 24 hours a day throughout the year.

3. Energy-saving technology, power saving and worry-free

Heating and Cooling Heat Pump is efficient and environmentally friendly. Compared with electric heating, it saves 75% of electricity bills per month, saving users considerable electricity bills.

Why are more and more consumers choosing Heating and Cooling Heat Pump?

Heating and Cooling Heat Pump can use floor heating as the heating end when heating. The comfort of floor heating is well known. It conforms to the traditional Chinese medicine theory of warm feet and cool top, giving people a feeling of warm feet and cool head. And the upper pass, the room is warm and cool, giving people a natural and comfortable feeling. Of course, radiators and fan coil units can also be selected at the end of indoor heating (when the water supply temperature is 35°C-45°C, the indoor floor heating can be used as the end; when the water supply temperature is 40°C-50°C, the indoor fan coil can be used as the end. The end; when the water temperature is above 55℃, the radiator can be used as the end in the room).

What installation conditions are the Heating and Cooling Heat Pump suitable for?

The main unit of the Heating and Cooling Heat Pump is similar to the outdoor unit of the central air conditioner, and can be installed in the outdoor unit of the central air conditioner, and the air energy heat pump has the functions of cooling and heating, as long as sufficient ventilation and ventilation environment is ensured, for other installations conditions are relatively low. However, when considering the installation factors of solar heating equipment, it is especially necessary to pay attention to the lighting conditions. It is difficult for ordinary elevator apartments to find suitable installation conditions.

For more information about Heating and Cooling Heat Pump, please contact Guangdong JNOD New Energy Technology Co., LTD., Ltd. has committed to providing the increasing of Heating and Cooling Heat Pump, and make them more effective, reliable, and consistent.

During the working process of the heat pump water heater, it consumes 1-part electricity to get the compressor running, and at the same time, it can absorb about 4-part heat from the ambient air and transfer it to the water. Therefore, air energy water heaters can save almost 3/4 electricity compared to electric water heaters. That is, the electric water heater consumes 4 kWh electricity to produce hot water, and the air energy water heater requires only 1 kWh electricity.

What role does the refrigerant play in the unit composition of the heat pump water heater?

What is the physical principle of how a heat pump water heater works?

What is the significance of the appearance of heat pump water heaters?

What role does the refrigerant play in the unit composition of the heat pump water heater?

The heat pump unit contains a special heat-absorbing refrigerant. In the liquefied state, the normal temperature is below minus 20°C. Therefore, there is a temperature difference between it and the outside temperature. The refrigerant absorbs the outside temperature and is stored in the evaporator. Generate pressure and evaporate and evaporate, and through the work of the heat exchanger (heat pump), when the refrigerant is transferred from the evaporated state to the liquefied state, the objectively existing heat is released to the storage water in the water tank.

What is the physical principle of how a heat pump water heater works?

The heat pump water heateruses the heat absorbing medium (refrigerant) in the device to collect heat energy from the air or the natural environment, heats the cold water quickly through the heat exchanger and at the same time releases the cold air, avoiding the lack that conventional solar products can not work in rainy weather and at night. As long as the outside temperature is above 1-15 degrees, it can work normally, so can be more efficient and energy-saving, at the same time does not occupy open space, and is easy to install and flexible to use.

What is the significance of the appearance of heat pump water heaters?

With the rapid development of the economy and the improvement of people's living standards, water heating has become a necessity for people's lives. However, conventional electric water heaters have the disadvantages of large energy consumption, high cost and serious environmental pollution; while the operation of energy-saving and environmentally friendly solar water heaters is also restricted due to weather conditions. The heating principle of the air heat pump is different from that of the conventional solar water heater. The air heat pump uses air, water, solar energy, etc. as a low temperature heat source, and the air heat pump uses the electrical energy as energy to absorb heat from the low temperature side to heat the service water.

Guangdong JNOD New Energy Technology Co., LTD. can provide product certification requirements for local markets; provision of catalogues, technical manuals; exhibit together with customers at leading industrial fairs; Advertise in local market media through our press release resources.

A swimming pool heat pump works to keep a constant pool temperature and extend the swimming season. Over the past years, it has stood out from other similar products such as boilers and the electric water heater and gained a growing market share. According to Arizton’s report, the pool heat pump market is expected to grow at a CAGR of over 5% during 2019−2025. Why does the pool heat pump become increasingly popular?

1. The rising economy and preference for swimming

Swimming has a long history and has been very favorable in the western world like North America, Europe, and Australia. It is assumed that the heat pump segment will increase stably in the foreign market owing to the consumption habit formed decades ago. Over the past few years, the thriving economy has made people out of western world more favorable for this sport. The Asia Pacific (APAC) region is expected to grow at a CAGR of around 6% in terms of revenues with a rise in swimming pool construction, high disposable income, and growth in awareness. As people enjoy a higher living standard and the group of villas-resident booms, the heated pool which can protect the privacy and bring better life quality, becomes a must for them.

2. A wave of home workouts during the pandemic, an engine for the private pool economy

During the Covid-19 pandemic, consumers have to stay at home and cannot go to the beach or public swimming pools, so private pools and hot tubs have met a wave of demand. And heat pumps also benefit from the fad. By its core competitiveness and the prosperous market, the heat pump one day will take the lead in the pool industry.

3.Energy efficiency and Cost-effectiveness

Known as one of the most energy-efficient pool heating options available, the heat pump is an “energy sipper” in comparison to other options. While electric heaters will use resistors and gas heaters burn fuel, heat pumps generate heat from ambient air, meaning it harvest heat from the air around it. The tiny amount of energy a heat pump uses to compress and convert is nothing compared to the amount of energy other heating options use.It’s greatly save energy and cut down your electricity bill.

4. Eco-Friendly

When you use a gas heater you are relying on combustion of the fuel. They continually burn gas in order to produce heat. This process comes with environmental consequences by emitting CO2 that destroys our ozone layer. A heat pump, however, does not burn anything and pull minimal electricity to harvest ambient air, and produces zero CO2 emissions.

5. Durability

Like any investment, you want your pool and all of its moving parts to last for years to come. Gas and electric heaters will only allow for 5-10 years max of usage and any repairs you might need on them will break the bank. A heat pump is built with longevity in mind and at a minimum will last 10-20 years, and with proper maintenance can last even longer.

It's no doubt an ideal choice for the green lifestyle, right?

Please feel free to contact our JNOD sales team when you need a swimming pool heat pump.OEM and ODM project are acceptable.

Email: info@jnodboiler.com  Phone: +86-757-23617848

Winter has arrived, and people tend to use heat pumps as heating machines. If the heat pump unit can be installed reasonably, the service life and heating capacity of the heat pump will be improved. Let Jnod tell you how to install it, see below:

1. Unit installation location planning

1) The installation requirements of the heat pump main unit are similar to the installation requirements of the outdoor unit of the air conditioner. It can be installed on the roof, balcony, and ground. The air outlet should avoid the windward direction.

2) The distance between the main unit (wind from the side) and the surrounding walls or other obstructions should not be too small. There should be no obstructions within 1 meter of the air outlet, and ensure that the heat exhaustion and suction of the heat exchanger are not hindered.

3) There should be no obstructions within 1 meter of the air inlet of the main unit (top air outlet), and no obstructions within 2 meters of the air outlet to ensure that the heat exhaustion and suction of the heat exchanger of the main unit are not hindered.

When the unit is installed under the eaves or there are horizontal obstacles above the unit, the installation location of the unit must be in a well-ventilated place, otherwise it is easy to short-circuit the air flow, resulting in poor heat dissipation capacity of the unit.

2. Unit installation environment control

1) Try not to place it in direct sunlight.

2) Not on the window sill of the bedroom or near the bedroom.

3) There is enough distance between the air inlet and outlet to facilitate heat dissipation.

4) Places that can withstand more than 2-3 times the weight of the outdoor unit.

5) A place where there is no oily smoke or other corrosive gas.

6) A place that does not affect other factors or the environment.

Heating and Cooling Heat Pump installs a four-way reversing valve on the basis of ordinary air conditioners, and changes the operation of the valve, which can exchange the functions of the evaporator and the condenser of the original air conditioner, so as to change the function of cooling indoor air. Changed to the function of heating indoor air.

What are the structural advantages of the Heating and Cooling Heat Pump?

What is the user's experience with Heating and Cooling Heat Pump?

Why the use of Heating and Cooling Heat Pump can save resources?

What are the structural advantages of the Heating and Cooling Heat Pump?

The evaporator of the Heating and Cooling Heat Pump adopts the method of countercurrent heat exchange for heat exchange to enhance the heat exchange effect; moreover, the heat exchange method combining fins and tube bundles is used, and each row of heat exchange tubes is arranged in a cross. The method of turbulence increases the convective heat transfer coefficient on the exhaust side and enhances the heat transfer effect;

The refrigerant tube bundle of Heating and Cooling Heat Pump is made of red copper, and the fins are made of hydrophilic aluminum foil. The condensed water in the exhausted air drips on the surface of the heat exchanger to form a water film that is conducive to heat exchange, increasing the heat exchange coefficient and enhancing the heat exchange effect;

The Heating and Cooling Heat Pump has an advanced microcomputer control system, and adopts a special programmable controller PLC for imported air-conditioning equipment, which has the ability to resist electromagnetic interference, intelligent coupling between building load and unit heating; Display, fault alarm and diagnosis functions.

What is the user's experience with Heating and Cooling Heat Pump?

The Heating and Cooling Heat Pumpis also very comfortable, clean and safe. In the past, when burning coal, it was not only dirty, tiring and troublesome, but also the temperature was not high, usually 14-16 degrees, and you had to wear cotton-padded clothes at home. Now open to 18 degrees and wear a thin sweater. If the weather is cold, turn up the temperature. Anyway, the Heating and Cooling Heat Pump is also very convenient, and you can adjust the temperature by pressing a button.

Why the use of Heating and Cooling Heat Pump can save resources?

The Heating and Cooling Heat Pump unit has the dual functions of supplying cold water in summer and supplying hot water in winter. Using air as the heat source and cooling source can greatly save water and avoid the pollution of water quality. The air-cooled modular cold and hot water unit can be placed on the top floor of the building or on the outdoor platform to work, eliminating the need for a dedicated cold source machine room and boiler room.

JNOD focuses on heat pump& electric boiler R&D, manufactures and provides comprehensive energy-saving solutions. Our sales team have extensive experience of overseas markets. We provide sincere and professional services, including OEM/ODM/project services, technology support, market analysis, usage of design and composition of installation.