Heat Pump Hot Water Heater merchants- China Manufacturers Factory Suppliers

Heat pumps can both heat and cool because they are made with a component called a reversing valve. This valve allows the heat pump to change the flow of refrigerant in the system, so it can operate in either cooling or heating mode. During the winter, in heating mode, the heat pump absorbs heat from the surrounding air, concentrates it in the heat exchanger and blows the air into your home. In the summer months, the heat pump removes the heat and humidity from your indoor air and transfers it to the outside.

For the heating & cooling heat pump,we have both R32 and R410A inverter model,.The heating capacity can be made from 10KW to 26KW, All-in-one & Monoblock type are available.

Benefits of JNOD Heat Pumps:

Adopting Mitsubishi inverter dedicated compressor.

Which designed for the low temperature operation specially, -25℃ running stably.

Super High Efficiency A+++

Air-to-water heat pump is specially developed through cutting-edge energy-saving technology to reach the highest A+++ energy rating to meet the stringent requirements for energy efficiency.,contributing to environmental protection while significantly reducing energy bills for customers.

DC Inverter EVI Technology

DC Inverter EVI Technology can effectively reduce power consumption and improve the heating capacity of heat pump units to ensureperatures as low as -25℃，which helps to offer the users optimum house heating and hot water supply all year round.

If you want to know more information, please feel free to contact us.

When the indoor swimming pool is used in winter, it is necessary to heat the pool water to make the water temperature reach 26-28 degrees, which requires a lot of thermal energy. Boilers, gas, and electricity are gradually eliminated due to their low thermal efficiency and environmental protection. More and more people will Option to use Swimming Pool Heat Pump. So in addition to environmental protection, what are the benefits of Swimming Pool Heat Pump?

Compared with traditional boilers, what are the advantages of Swimming Pool Heat Pump?

What advancements have the Swimming Pool Heat Pump made?

Why is the demand for Swimming Pool Heat Pump increasing?

Compared with traditional boilers, what are the advantages of Swimming Pool Heat Pump?

Compared with traditional boilers, Swimming Pool Heat Pump does not use any fuel such as coal, oil, gas, etc., and does not produce open flames and exhaust emissions. Therefore, the use of air source heat pumps not only protects the atmospheric environment, but also eliminates fire, explosion, poisoning, etc. Accident happens. Compared with ordinary electric water heaters, it consumes less power, avoids leakage accidents, saves energy and is environmentally friendly. Compared with solar water heaters, air energy heat pumps are not affected by weather, geography, climate and other factors when working Sunny can be used normally.

What advancements have the Swimming Pool Heat Pump made?

smart system

① The unit control system adopts intelligent control. When customers use it, they only need to set the air temperature, humidity, and pool water temperature, and then the equipment will enter the fully automatic operation state, and there is no need for special personnel to take care of it.

② Customers can learn air temperature, humidity and other data through the touch-type full-color screen. Real-time value of pool water temperature and operating status of equipment.

③ Customers can also choose a communication interface according to their needs to implement remote control, monitoring and connection with the system.

ventilation system

Customers can choose the intelligent ventilation system of Swimming Pool Heat Pump. After choosing this system, the unit will control the amount of fresh air entering the room according to the concentration of carbon dioxide in the room, which can greatly save the energy consumption during operation.

Why is the demand for Swimming Pool Heat Pump increasing?

Not only that, the advancement and development of sports equipment and facilities and equipment technology have also provided a foundation for more people to actively participate in fitness. Take swimming, the most popular sport, as an example. In the past, people swimming in open-air pools or public waters were easily limited by the temperature environment. If they accidentally caught a cold, it would be bad for their health, and microbial bacteria would grow in public waters. , the health situation is not optimistic. In recent years, with the advancement of Swimming Pool Heat Pump related supporting technical facilities, many swimming pools and other fitness places are equipped with heated swimming pools, and even schools, communities, villas, etc. are equipped with heated swimming pools, so that people can not only enjoy the hot summer. The fun of refreshing swimming can also have a comfortable swimming experience in the cold winter.

If you would like to receive more information about the Swimming Pool Heat Pump, please connect Guangdong JNOD New Energy Technology Co., LTD., and they will be happy to answer your question!

Heating and Cooling Heat Pump installs a four-way reversing valve on the basis of ordinary air conditioners, and changes the operation of the valve, which can exchange the functions of the evaporator and the condenser of the original air conditioner, so as to change the function of cooling indoor air. Changed to the function of heating indoor air.

What are the structural advantages of the Heating and Cooling Heat Pump?

What is the user's experience with Heating and Cooling Heat Pump?

Why the use of Heating and Cooling Heat Pump can save resources?

What are the structural advantages of the Heating and Cooling Heat Pump?

The evaporator of the Heating and Cooling Heat Pump adopts the method of countercurrent heat exchange for heat exchange to enhance the heat exchange effect; moreover, the heat exchange method combining fins and tube bundles is used, and each row of heat exchange tubes is arranged in a cross. The method of turbulence increases the convective heat transfer coefficient on the exhaust side and enhances the heat transfer effect;

The refrigerant tube bundle of Heating and Cooling Heat Pump is made of red copper, and the fins are made of hydrophilic aluminum foil. The condensed water in the exhausted air drips on the surface of the heat exchanger to form a water film that is conducive to heat exchange, increasing the heat exchange coefficient and enhancing the heat exchange effect;

The Heating and Cooling Heat Pump has an advanced microcomputer control system, and adopts a special programmable controller PLC for imported air-conditioning equipment, which has the ability to resist electromagnetic interference, intelligent coupling between building load and unit heating; Display, fault alarm and diagnosis functions.

What is the user's experience with Heating and Cooling Heat Pump?

The Heating and Cooling Heat Pumpis also very comfortable, clean and safe. In the past, when burning coal, it was not only dirty, tiring and troublesome, but also the temperature was not high, usually 14-16 degrees, and you had to wear cotton-padded clothes at home. Now open to 18 degrees and wear a thin sweater. If the weather is cold, turn up the temperature. Anyway, the Heating and Cooling Heat Pump is also very convenient, and you can adjust the temperature by pressing a button.

Why the use of Heating and Cooling Heat Pump can save resources?

The Heating and Cooling Heat Pump unit has the dual functions of supplying cold water in summer and supplying hot water in winter. Using air as the heat source and cooling source can greatly save water and avoid the pollution of water quality. The air-cooled modular cold and hot water unit can be placed on the top floor of the building or on the outdoor platform to work, eliminating the need for a dedicated cold source machine room and boiler room.

JNOD focuses on heat pump& electric boiler R&D, manufactures and provides comprehensive energy-saving solutions. Our sales team have extensive experience of overseas markets. We provide sincere and professional services, including OEM/ODM/project services, technology support, market analysis, usage of design and composition of installation.

Swimming Pool Heat Pump is equipped with high-quality brand scroll compressors, with stable operation, low vibration, low noise, and low failure rate; key components such as thermal expansion valves, electronic appliances, etc. are well-known brand components with reliable performance.

How to choose a truly eco-friendly Swimming Pool Heat Pump?

What is the function of the Swimming Pool Heat Pump damping system?

Why choose an energy-efficient Swimming Pool Heat Pump?

How to choose a truly eco-friendly Swimming Pool Heat Pump?

The initial heating determines the model selection. The real energy saving stage of the Swimming Pool Heat Pump depends on the "constant temperature" period.

Select frequency conversion, more energy saving, the key to Swimming Pool Heat Pump lies in the operation logic of frequency conversion technology. In the constant temperature stage, the frequency conversion technology can enable the equipment to operate intelligently at a low frequency and match the real-time heating demand. There is no need to continuously heat the pool water by repeatedly starting and stopping like a fixed-frequency heat pump, so as to achieve the purpose of energy saving. We can compare the energy saving performance of fixed frequency heat pump and variable frequency heat pump under the same conditions.

Due to the difference in temperature, the heating efficiency of the heat pump will also be different. To compare the energy-saving effect in the constant temperature stage, we chose a fixed-frequency heat pump with the same heating level as the variable-frequency heat pump (IPHC150T) selected in the previous step at an air temperature of 26 °C (26 °C is generally used as the test temperature in the laboratory). Frequency selection is 60kw.

What is the function of the Swimming Pool Heat Pump damping system?

① The independent suspension shock absorption system makes the fan and motor run more quietly and reduces the noise caused by air disturbance.

② An integral base carries the fan and the motor, and according to the load-bearing distribution of each part, different types and quantities of shock absorbers are correspondingly configured to avoid jumping, anti-vibration and resonance, and make the operation of the fan and the motor more stable.

③ The fan and the box are isolated by flexible connection to avoid vibration transmission.

Why choose an energy-efficient Swimming Pool Heat Pump?

Considering indoor air quality, Swimming Pool Heat Pump is equipped with fresh air treatment function and exhaust function.

Considering the operating cost of the constant temperature heat removal pump unit, the Swimming Pool Heat Pump can use a large amount of outdoor low-humidity fresh air to adjust the humidity of the indoor air in spring and autumn, reducing operating costs.

In order to prevent the circulating air from affecting the service life of the Swimming Pool Heat Pump, the key components and sheet metal structure of the equipment are treated with anti-corrosion during the manufacturing process, and the compressor, power distribution cabinet and control system are isolated from the wind system.

Guangdong JNOD New Energy Technology Co., LTD. is committed to providing customers the best hot water & heating solutions with our heat pump products, focusing on the latest technologies, strive for outstanding quality in our products and customer service.

heating and cooling heat pump integrates air conditioning and heating systems, is comfortable and energy-saving, and will surely lead the market trend of comfortable home life in the future.

How exactly does the heating and cooling heat pump work?

What is the basic principle of heating and cooling heat pump?

Will the floor height affect the installation of the heating and cooling heat pump?

How exactly does the heating and cooling heat pump work?

The common heating and cooling heat pumps on the market are almost all of combined cooling and heating, which solves the problems of cooling in summer and heating in winter through a set of equipment. In some specific areas (the temperature is relatively high in winter), the air energy heat pump can also be connected to the domestic hot water tank to provide 24-hour uninterrupted hot water for the family, so the air energy heat pump can be used for cooling and heating, as well as cooling and heating. And with domestic hot water, but in order not to affect the heating effect, the domestic hot water is generally not combined.

What is the basic principle of heating and cooling heat pump?

Basic principle of heating and cooling heat pump: it is mainly composed of compressor, heat exchanger, axial fan, thermal insulation water tank, water pump, liquid storage tank, filter, electronic expansion valve and electronic automatic controller. After the power is turned on, the axial flow fan starts to operate. The outdoor air is heat exchanged through the evaporator. The air with reduced temperature is discharged from the system by the fan. At the same time, the working medium inside the evaporator is sucked into the compressor. The compressor compresses the low-pressure working medium gas into high-temperature and high-pressure gas and sends it to the condenser. The water forcibly circulated by the water pump also passes through the condenser and is heated by the working medium and sent to the user for use, The working medium is cooled into liquid, which flows into the evaporator again after throttling and cooling by the expansion valve. In this way, the heat energy in the air is continuously "pumped" into the water, so that the water temperature in the insulation water tank gradually rises to about 55 ℃, which is just suitable for people to take a bath. This is the basic working principle of heating and cooling heat pump.

Will the floor height affect the installation of the heating and cooling heat pump?

The floor height problem, many people think that the floor height of the elevator apartment is relatively low, and the installation of heating and cooling heat pump will cause the room to become depressed, but in fact, the installation of heating and cooling heat pump will not have much impact on the floor height. , The concealment of central air-conditioning can reduce the sense of oppression of the floor height through the reasonable planning of the ceiling, and the floor heating can also be laid by dry floor heating. The floor height is only increased by 3-4 cm, and the user cannot distinguish it with the naked eye.

Guangdong JNOD New Energy Technology Co., LTD. is the leading manufacturer sofa manufacturer specializing in heating and cooling heat pump. If you want to get more information, just go and connect them.

Under normal circumstances, when the average temperature is -5°C, the Heating and Cooling Heat Pump can generate more than three times the amount of heat per kWh of electricity consumed, and the energy saving efficiency is as high as 75% compared to the direct conversion of electrical energy into heat; when the average temperature is - At 15°C, 1 kWh of electricity consumption can generate more than twice the heat; even at -25°C, the Heating and Cooling Heat Pump can normally provide heat for the room.

What are the similarities and differences between Heating and Cooling Heat Pump and solar water heaters?

What is PTC heating with Heating and Cooling Heat Pump?

What are the advantages of using the Heating and Cooling Heat Pump?

What are the similarities and differences between Heating and Cooling Heat Pump and solar water heaters?

From the scope of application, heating continuity, operating cost, and installation conditions, Heating and Cooling Heat Pumpis easier to popularize than solar heating equipment, and solar heating equipment will be more affected by environmental factors. At the same time, the thermal efficiency of Heating and Cooling Heat Pump is very high, consuming 1 kWh of electricity can get three heat energy, and even if the thermal efficiency of solar energy reaches 100%, consuming 1 kWh of electricity can only generate 1 heat energy. It can be seen that the public is most concerned about energy saving. When the environment is harsh in winter, the energy consumption of Heating and Cooling Heat Pump is lower than that of solar heating equipment.

What is PTC heating with Heating and Cooling Heat Pump?

PTC electric heater is a kind of heater with automatic temperature control and power saving. It uses PTC heat-sensitive ceramic element as heating source, corrugated sheet made of aluminum alloy as radiator, and the heater is composed of bonding and welding. . Electric vehicle air-conditioning heater PTC generally collects data from temperature sensors through the air-conditioning controller, and adjusts the output power to achieve temperature setting. Currently widely used in pure electric vehicles. However, when the Heating and Cooling Heat Pump is used for heating in winter, the power consumption of the battery is very large, which seriously affects the cruising range. Now they have turned their attention to the heat pump solution, or the parallel solution of the two.

What are the advantages of using the Heating and Cooling Heat Pump?

First, energy saving is beneficial to the comprehensive utilization of energy. Heating and Cooling Heat Pump absorbs the low temperature heat energy in the air, and converts it into high temperature heat energy after being compressed by the compressor, and its energy saving effect is quite significant;

Second, Heating and Cooling Heat Pump is conducive to environmental protection;

Third, the combination of cold and heat, the application rate of Heating and Cooling Heat Pump is high, saving investment,

Fourth, because the Heating and Cooling Heat Pump is electrically driven, it is more convenient to control.

The Heating and Cooling Heat Pump has achieved an irreplaceable position in furniture design. Guangdong JNOD New Energy Technology Co., LTD. is committed to providing various Heating and Cooling Heat Pumps of high quality for all customers from all over the world.

Heating and Cooling Heat Pump uses scientific methods to make low-temperature heat energy flow to high-temperature heat energy according to the "inverse Carnot principle", and obtains more heat energy from the air, which has wide adaptability.

How does the Heating and Cooling Heat Pump cycle for cooling and heating?

What is the principle of Heating and Cooling Heat Pump?

Can the Heating and Cooling Heat Pump still operate at an ambient temperature of 0°C?

How does the Heating and Cooling Heat Pump cycle for cooling and heating?

During heating, the refrigerant (environmentally friendly refrigerant) in the Heating and Cooling Heat Pump host will absorb the low-temperature heat energy in the air through the evaporator, and then convert it into high-temperature heat energy through the compressor, and then transfer the heat energy to the heating circulating water through the heat exchanger. Finally, the heated hot water is transported to the indoor heating terminal for heat dissipation through the water pump, and then returned to the heat exchanger for heating after the heat dissipation, and the process is repeated.

During cooling, the cycle of the Heating and Cooling Heat Pump system is just the opposite, absorbing the indoor heat and transferring it to the outdoors. Air heat exchange, an additional heat exchange program.

What is the principle of Heating and Cooling Heat Pump?

Shallow water sources on the earth's surface (generally within 1000 meters), such as groundwater, surface rivers, lakes and oceans, absorb considerable radiant energy from the sun into the earth, and the temperature of water sources is generally very stable. The working principle of Heating and Cooling Heat Pump is to realize the transfer of low-temperature heat to high-temperature by inputting a small amount of high-grade energy (such as electric energy). The water body is used as the heat source of heat pump heating in winter and the cold source of air conditioning in summer, that is, the heat in the building is "taken out" and released into the water body in summer. Because the water source temperature is low, it can efficiently take away the heat, so as to achieve the purpose of indoor cooling of the building in summer; In winter, heat energy is "extracted" from the water source and sent to the building for heating through Heating and Cooling Heat Pump.

Can the Heating and Cooling Heat Pump still operate at an ambient temperature of 0°C?

The answer is yes, although Heating and Cooling Heat Pumpproducts were mostly used in high temperature areas in the early days, with the continuous development of heat pump technology, air energy heat pump heating can be used in most areas, especially for some low temperature environments. The Heating and Cooling Heat Pump uses technologies such as jet enthalpy to ensure that the Heating and Cooling Heat Pump can operate normally in severe cold climates.

Guangdong JNOD New Energy Technology Co., LTD. has been committed to providing customers with Heating and Cooling Heat Pumps and perfect after-sales service so that customers can invest easily, use them with confidence, and have no worries.

The heat pump water heater is almost the same as the cooling principle. A good heat pump system design can utilize the cold and hot ends of the refrigeration system at the same time, that is, in hot summer, the indoor is refrigerating, while the outdoor condenser is heating hot water.

What is the purpose of the heat pump water heater?

What are the performance advantages of heat pump water heaters?

What should be paid attention to in the installation of heat pump water heater?

What is the purpose of the heat pump water heater?

heat pump water heater integrates various functions such as hot water supply, heating, dehumidification, cooling, and air filtration:

No matter the weather, rain or snow all year round, the eat pump water heater automatically provides hot water 24 hours a day without interruption;

eat pump water heater High-efficiency dehumidification, the maximum dehumidification capacity is 6~8 kg in 24 hours a day, and the effect is obvious in rainy and rainy weather;

eat pump water heater filters indoor air, and the effect is more obvious when installed in the kitchen.

eat pump water heater With additional heating accessories, it can heat up the room by more than 5°C in winter, making learning, entertainment and sleeping more comfortable. No matter it is cloudy, sunny, day or night, as long as there is air, hot water can be produced. At room temperature, 180L of hot water can be produced per hour.

What are the performance advantages of heat pump water heaters?

1. It is safe enough, water and electricity are separated, no danger, it is heated by the heat of air, and it is highly technological. Other water heaters have certain risks. heat pump water heaters are completely safe, protecting the lives of family members and providing comfortable hot water.

2. Economical enough, heat pump water heater is used in winter, about 1~1.5 kWh of electricity a day, enough for a family of 4~5 people, generally 4~5 people, at least 3~4 kWh of electricity a day.

3. Enough to enjoy, the heat pump water heater can have 24 hours of comfortable hot water, and it is a 24-hour constant temperature, which can be used immediately after opening, saving a lot of time for boiling water and avoiding accidents.

4. It is fashionable enough. The exterior of the heat pump water heater is very good-looking. At first glance, it makes people feel high-end and fashionable.

5. It is convenient enough, the heat pump water heater can be operated by iphone to control the temperature, or it can be controlled by the touch screen of the machine, which is convenient and fast.

6. Comfortable enough, the heat pump water heater has the function of air-conditioning in the kitchen, which solves the problem of hotness in the kitchen and enjoys the sense of accomplishment when cooking.

What should be paid attention to in the installation of heat pump water heater?

With drainage facilities:

When installing the heat pump water heater, condensed water will be discharged during use, so the installation location must have drainage facilities such as floor drains and gutters.

Instrument installation location:

The instrument, that is, the control panel, needs to be installed nearby to avoid rain; since most of the operation modes choose "economy mode", the control panel is rarely operated, and it is not necessary to install it in a very conspicuous position. Install.

Water pipe arrangement:

The inlet and outlet pipes of the heat pump water heater are preferably 25PPR pipes.

JNOD insisted on developing with technology innovation, it possessed of several national famous technicians and had invented multiply product patents. The company has been strictly implement the ISO international quality management system, and the products are of reliable guaranteed quality.

2022-11-24 · The Elite V3 has been redesigned from the ground up to bring a revolutionised pool heating system to the Australian market. In conjunction with the newest inverter technology the unit delivers better airflow, higher efficiency, …

Swimming pool heat pump costs are broken down into initial costs and running costs. The initial investment would cost you somewhere between ￡1,500 and ￡2,000 depending on the size of your pool and the region’s climate. This is much less than what you’d pay for a regular heat pump used in homes. One of these would cost you more than ￡13,000.

2022-11-18 · Commercial Heating And Cooling Heat Pump Domestic Heating And Cooling Heat Pump All In One Heat Pump Industrial Heat Pump Swimming Pool Heat Pump LRK-16IBM-C1 …

The Rheem Thermal pool

2022-11-25 · Swimming pool heat pumps generally come in 2 models, known as on/off heat pumps and inverter heat pumps. Inverters are now considered the …

Arctic Inverter Heat Pump

the most common centralized heating systems in both residential and commercial spaces typi

i-ForceLine Neo can be used for swimming pool heating or cooling. It is available to work at the ambient temperature of -2 °C to 40°C. Smart App for Option i-ForceLine Neo supports PHNIX smart APP control connected via WIFI or 4G DTU. Users can control the unit easily at anywhere and anytime. Intelligent Defrosting