A swimming pool heat pump works to keep a constant pool temperature and extend the swimming season. Over the past years, it has stood out from other similar products such as boilers and the electric water heater and gained a growing market share. According to Arizton’s report, the pool heat pump market is expected to grow at a CAGR of over 5% during 2019−2025. Why does the pool heat pump become increasingly popular?
1. The rising economy and preference for swimming
Swimming has a long history and has been very favorable in the western world like North America, Europe, and Australia. It is assumed that the heat pump segment will increase stably in the foreign market owing to the consumption habit formed decades ago. Over the past few years, the thriving economy has made people out of western world more favorable for this sport. The Asia Pacific (APAC) region is expected to grow at a CAGR of around 6% in terms of revenues with a rise in swimming pool construction, high disposable income, and growth in awareness. As people enjoy a higher living standard and the group of villas-resident booms, the heated pool which can protect the privacy and bring better life quality, becomes a must for them.
2. A wave of home workouts during the pandemic, an engine for the private pool economy
During the Covid-19 pandemic, consumers have to stay at home and cannot go to the beach or public swimming pools, so private pools and hot tubs have met a wave of demand. And heat pumps also benefit from the fad. By its core competitiveness and the prosperous market, the heat pump one day will take the lead in the pool industry.
3.Energy efficiency and Cost-effectiveness
Known as one of the most energy-efficient pool heating options available, the heat pump is an “energy sipper” in comparison to other options. While electric heaters will use resistors and gas heaters burn fuel, heat pumps generate heat from ambient air, meaning it harvest heat from the air around it. The tiny amount of energy a heat pump uses to compress and convert is nothing compared to the amount of energy other heating options use.It’s greatly save energy and cut down your electricity bill.
When you use a gas heater you are relying on combustion of the fuel. They continually burn gas in order to produce heat. This process comes with environmental consequences by emitting CO2 that destroys our ozone layer. A heat pump, however, does not burn anything and pull minimal electricity to harvest ambient air, and produces zero CO2 emissions.
Like any investment, you want your pool and all of its moving parts to last for years to come. Gas and electric heaters will only allow for 5-10 years max of usage and any repairs you might need on them will break the bank. A heat pump is built with longevity in mind and at a minimum will last 10-20 years, and with proper maintenance can last even longer.
It's no doubt an ideal choice for the green lifestyle, right?
Please feel free to contact our JNOD sales team when you need a swimming pool heat pump.OEM and ODM project are acceptable.
Email: firstname.lastname@example.org Phone: +86-757-23617848
With the widely known advantages of air energy heat pump products such as cleanliness, environmental protection, energy saving, stability and comfort, heating with Heating and Cooling Heat Pump products has become a trend. More and more northern == home users and schools, hotels, hospitals When transforming the original heating system in other places, choose to use Heating and Cooling Heat Pump.
Compared with ordinary central air conditioning refrigeration and gas wall-hung boiler heating, what are the advantages of Heating and Cooling Heat Pump?
What are the advantages of using the Heating and Cooling Heat Pump?
What is the working principle of Heating and Cooling Heat Pump?
The common heating and cooling equipment on the market is mainly fluorine system heating and cooling air conditioning or the combination of gas wall-hung boiler heating and central air conditioning refrigeration.
The main advantage of Heating and Cooling Heat Pump compared to ordinary heating and cooling air conditioners is high comfort. The fluorine system heating and cooling air conditioner directly controls the indoor temperature through the flow of the refrigerant, and the refrigerant directly exchanges heat with the air. This heat exchange method has two disadvantages: First, the temperature of the air outlet of the air conditioner is very low or very high (7°C-12°C during cooling, 40°C-50°C during heating), the body feels very bad, and it is bitingly cold in summer. The winter is hot and dry; second, although the fluorine system air conditioner has a relatively fast cooling and heating speed, it will also cause a large amount of moisture in the air to be taken away due to the rapid heating and cooling speed, resulting in excessive indoor dehumidification and drying.
1) The unit of Heating and Cooling Heat Pump has high energy efficiency ratio, energy saving and electricity saving.
2) The water temperature of the Heating and Cooling Heat Pump is generally constant at 12-22°C, which is 7°C for the water supply in summer, 12°C for the return water, 45°C for the water supply in winter, and 40°C for the return water, and the temperature difference between them is small. , so the unit has less work and more energy.
During the operation of Heating and Cooling Heat Pump, the evaporator absorbs heat from the ambient heat energy in the air to evaporate the heat transfer working medium. After the working medium vapor is compressed by the compressor, the pressure and temperature rise. When the high-temperature vapor passes through the special annular pipe bonded on the outer surface of the water storage tank, the condenser condenses into liquid and transfers the heat to the water in the water storage tank of air source heat pump.
Guangdong JNOD New Energy Technology Co., LTD. has focused on the development and production of Heating and Cooling Heat Pumps for several years. And it commits to providing perfect service for every customer from all over the world.
Guangdong JNOD New Energy Technology Co., LTD. focusing on heat pump& electric boiler R&D, manufacturing and providing comprehensive energy-saving solutions.
JNOD has a complete heat pump industry chain, and its products involves Swimming Pool Heat Pump, House Heating & Cooling Heat Pump, Domestic Hot Water Heat Pump, Heat Pump Dehumidifier, Commercial & Industrial High Temperature Water Heating Solution, Industrial and Agricultural Heat Pump Dryer,etc.The ultra-low temperature EVI heat pump has been widely used, too.
JNOD insisted on developing with technology innovation, it possessed of several national famous technicians and had invented multiply product patents. The company has been strictly implement the ISO international quality management system, and the products are of reliable guaranteed quality.
We are committed to providing customers the best hot water & heating solutions with our heat pump products, focusing on the latest technologies, strive for outstanding quality in our products and customer service.
Under normal circumstances, when the average temperature is -5°C, the Heating and Cooling Heat Pump can generate more than three times the amount of heat per kWh of electricity consumed, and the energy saving efficiency is as high as 75% compared to the direct conversion of electrical energy into heat; when the average temperature is - At 15°C, 1 kWh of electricity consumption can generate more than twice the heat; even at -25°C, the Heating and Cooling Heat Pump can normally provide heat for the room.
What are the similarities and differences between Heating and Cooling Heat Pump and solar water heaters?
What is PTC heating with Heating and Cooling Heat Pump?
What are the advantages of using the Heating and Cooling Heat Pump?
From the scope of application, heating continuity, operating cost, and installation conditions, Heating and Cooling Heat Pumpis easier to popularize than solar heating equipment, and solar heating equipment will be more affected by environmental factors. At the same time, the thermal efficiency of Heating and Cooling Heat Pump is very high, consuming 1 kWh of electricity can get three heat energy, and even if the thermal efficiency of solar energy reaches 100%, consuming 1 kWh of electricity can only generate 1 heat energy. It can be seen that the public is most concerned about energy saving. When the environment is harsh in winter, the energy consumption of Heating and Cooling Heat Pump is lower than that of solar heating equipment.
PTC electric heater is a kind of heater with automatic temperature control and power saving. It uses PTC heat-sensitive ceramic element as heating source, corrugated sheet made of aluminum alloy as radiator, and the heater is composed of bonding and welding. . Electric vehicle air-conditioning heater PTC generally collects data from temperature sensors through the air-conditioning controller, and adjusts the output power to achieve temperature setting. Currently widely used in pure electric vehicles. However, when the Heating and Cooling Heat Pump is used for heating in winter, the power consumption of the battery is very large, which seriously affects the cruising range. Now they have turned their attention to the heat pump solution, or the parallel solution of the two.
First, energy saving is beneficial to the comprehensive utilization of energy. Heating and Cooling Heat Pump absorbs the low temperature heat energy in the air, and converts it into high temperature heat energy after being compressed by the compressor, and its energy saving effect is quite significant;
Second, Heating and Cooling Heat Pump is conducive to environmental protection;
Third, the combination of cold and heat, the application rate of Heating and Cooling Heat Pump is high, saving investment,
Fourth, because the Heating and Cooling Heat Pump is electrically driven, it is more convenient to control.
The Heating and Cooling Heat Pump has achieved an irreplaceable position in furniture design. Guangdong JNOD New Energy Technology Co., LTD. is committed to providing various Heating and Cooling Heat Pumps of high quality for all customers from all over the world.
Heating and cooling heat pump is a device that transfers thermal energy from a low temperature heat source to a high temperature heat source. for cooling and heating. The low-temperature heat sources usually used in heat pump installations are the media around us - air, river water, sea water, urban sewage, surface water, groundwater, reclaimed water, fire pools, or the working fluid discharged from industrial production equipment, these working fluids Often has a similar temperature to the surrounding medium.
How does the heating and cooling heat pump work?
Compared with ordinary central air conditioning refrigeration and gas wall-hung boiler heating, why does heating and cooling heat pump feel better?
What are the installation precautions for heating and cooling heat pump?
Water flows from high to low, and heat is transferred from high-temperature objects to low-temperature objects, which is a natural law. However, in real life, for the needs of agricultural irrigation, domestic water, etc., people use water pumps to send water from low places to high places. Similarly, in today's increasingly tense energy environment, in order to recover the heat in the low-temperature hot gas usually discharged into the atmosphere, the low-temperature hot water discharged into the river, etc., the heating and cooling heat pump is used to transfer the heat energy from the low-temperature objects to the high-temperature objects. Then the high temperature object is used to heat water or heating, so that the heat can be fully utilized. The working principle of the heat pump system is consistent with the working principle of the refrigeration system.
Heating and cooling heat pump has an additional heat exchange procedure in the cycle process, and the temperature difference of the system heat exchange is smaller (the air temperature of the fan coil unit in summer is 15℃-20℃, and the air temperature of the fan coil unit in winter is about 32℃) , the wind blowing out is softer, it will not take too much moisture, and the comfort is much better.
The installation location of the heating and cooling heat pump is a problem. Many people look at the installation example and think that the heat pump host with a water tank takes up too much space. The installation of the elevator apartment has to occupy a large living balcony or kitchen space. In fact, the air energy heat pump is also related to the power Related, the equipment of a large apartment is very large, and the equipment of a small apartment will be very small, and it can even be installed on an ordinary central air-conditioning unit.
Guangdong JNOD New Energy Technology Co., LTD. can provide product certification requirements for local markets; provide catalogs, technical manuals; co-exhibit with the clients in leading industry exhibitions; do promotion on the local market's media by our news release resources.
Air source heat pump water heaters are the same as the heating principle of air conditioners, they are all heat carriers. The air conditioner moves the outdoor heat into the room, and the air energy water heater moves the outdoor heat to the water tank to heat the cold water in the water tank. Because the heat in the air is free, the air energy water heater also saves electricity.
What is the operating mode and principle of the unit composition of the heat pump water heater?
What are the benefits of installing a heat pump water heater?
What is the difference between a heat pump water heater and an air conditioner?
The heat pump hot water unit is composed of a refrigeration cycle, including two parts: the main engine and the condenser. The main engine part includes evaporator, fan, compressor and expansion valve; the condenser is an incubator with condensing coils inside. The refrigerant absorbs the heat from the outside air in the evaporator and releases heat in the condensing coil through the heat pump cycle to heat the water in the water tank. The thermal insulation layer of the water tank is foamed with closed-cell rubber sponge or polyurethane, and has good thermal insulation performance.
1. Safety: No gas, no waste gas, and no "gas poisoning"; no electric heating rod for heating, there is no danger of leakage, and people's health and safety are protected.
2. Save money: The COP value is more than 3, the energy efficiency ratio is high, and it definitely saves electricity and money. It can save 2/3~3/4 of electricity expenses, or 1/2~2/3 of gas expenses and auxiliary heating expenses of solar water heaters.
3. Comfort: automatic constant temperature and pressure water supply, never hot and cold when using hot water, hot water has pressure, good comfort. All-weather supply of domestic hot water makes up for the embarrassment of solar energy when there is no hot water available in rainy days, nights, no sunlight, and freezing.
4. Environmental protection: The cold air discharged from the heat pump water heater is beneficial to reduce the room temperature.
Comparison of heat pump water heaters and air conditioners: The principle of heat pump water heaters and air conditioners is the same, but the technical content of heat pump water heaters is higher than that of air conditioners, which is why heat pump water heaters have only been listed in recent years. In general, heat pump water heaters are the product of the development of science and technology to a certain stage. The heat dissipation temperature of the air conditioner cannot work in an environment where the cooling temperature is 40~50°C, and the water temperature of the heat pump water heater can reach about 60°C or even higher.
Guangdong JNOD New Energy Technology Co., LTD., which has been established for several years, focuses on the production of heat pump water heaters. Here, you can find the heat pump water heaters you need.
If you're thinking of getting a new air source heat pump, one of the things you will need to consider is what type of heat pump suits your property best, a monobloc or a split unit.
A monobloc air source heat pump comes in one single outdoor unit. This connects directly to the heating system of a property and can be controlled by an indoor control panel or thermostat. There is often also an outdoor control panel for the unit.
Benefits of a monobloc heat pump
There are several benefits to choosing a monobloc air source heat pump-which we have detailed below.
More indoor space
As monobloc air source heat pumps are single outdoor units, they are very effective at providing more space inside your property. Depending on what kind of boiler you had installed previously, you could gain some indoor space from where the boiler used to be.
Easier to install
Monobloc units are self-contained, meaning there is no need for the connection of refrigerant pipes. This means any trained heating engineer should be able to install one with little difficulty, as the only connections that need to be made are those of water pipes to the central heating system. Due to the simplicity of their installation, monobloc air source heat pumps can be installed quickly which, in turn, makes their installation less costly.
Easy to maintain
Due to their all-in-one design, monobloc heat pumps are easy to maintain. While this is more of a benefit to heating engineers that will be doing the maintenance, it could also mean that having someone at your property to run maintenance on your heat pump will take less time out of your day.
When choosing the best heat pump for your property, it is important to consider the disadvantages of each unit too. You can find the disadvantages of installing a monobloc heat pump below.
Whilst you can have a monobloc air source heat pump connected directly to your central heating system, to heat the water in your radiators or underfloor heating, you will not get any hot running water without the installation of a separate hot water storage tank. If you already have a regular boiler or system boiler installed at your property, this will only mean replacing the existing hot water tank. However, if you have a combi boiler, a new hot water storage tank will likely take up space in your property that was previously free.
Monobloc air source heat pumps have to be connected directly to the central heating system in a property. This means they will need to be located on an outer wall of your property with very little flexibility regarding whereabouts they can be installed.
A big drawback of monobloc air source heat pumps is their size. Due to them being an all-in-one unit, there is a lot of technology to fit in a single box. This makes them very large. If you have a small garden or your home has little or no front garden, you are going to struggle to find enough space to install a monobloc unit. Even if you do have enough space at the back of your property, the unit still needs a reasonably clear area around it to allow it to work at peak efficiency.
Split air source heat pumps consist of an outdoor fan unit and an indoor hydro unit. While the outdoor fan unit extracts ambient air from outside the property, the indoor unit heats the refrigerant and transfers its heat to the water in the central heating system. It also acts as a thermostat and control panel.
When choosing a split air source heat pump over a monobloc heat pump, there are several benefits which we have detailed below.
The outdoor units of split air source heat pumps are considerably smaller than their monobloc counterparts and will take up far less space outside of your property. Due to their smaller size, they are generally quieter to run as well.
Depending on the split air source heat pump you choose, you may not need a separate hot water storage tank to allow for hot running water in your home. This is because several indoor unit options include an integrated hot water storage tank in their design. These units can completely negate the need for a separate hot water storage tank, or reduce the size of a separate hot water storage tank you will need, depending on the unit you choose.
As the indoor unit of a split heat pump is the only part that's connected to the central heating system, this gives you more freedom with where you can place the outdoor unit. Some split air source heat pumps allow for the outdoor unit to be placed up to 75m away from the indoor unit. This gives you the potential to place the outdoor unit at the bottom of the garden out of the way, or up on a less intrusive wall.
When choosing the best heat pump for your property, it is important to consider the disadvantages of each unit too. You can find the disadvantages of installing a split heat pump below.
Due to the separate indoor and outdoor units, split heat pumps are more complicated to install. Many of them require the installation of refrigerant connections (which can only be done by a heating engineer with F gas qualifications). This makes the installation more time-consuming and is likely to increase the cost. As these units are also relatively new, you may find it harder to find a qualified heating engineer in your area as well.
Unsurprisingly, installing a split air source heat pump will probably take up more room inside your property than a monobloc heat pump. Mainly due to their being an indoor unit as well as an outdoor unit. The most drastic loss of indoor space you could face with a split heat pump is installing an indoor unit and a separate hot water storage tank. This would not only fill the space your boiler previously inhabited, but take up further space with a hot water storage tank. This can be remedied by opting for an indoor unit with an integrated hot water storage tank, but it is not something that should be overlooked.
Being more complicated in design than a monobloc heat pump, split air source heat pumps are generally a little more expensive to buy. Couple this with a potentially more costly installation and the price difference can start to add up. However, there is no guarantee a split heat pump will cost more than a monobloc, and you should always get comparison quotes to ensure you get the best installation price possible.
Unfortunately, when it comes to picking the best air source heat pump, there is no a definitive answer. All you can do is use the information we have provided and compare it against your circumstances. The best air source heat pump for you will be whichever best suits your home and your needs.
Whenever making a decision as big as this, we highly recommend getting advice from a local heating expert. Luckily, this is something we can help with. We'll provide you with free no-obligation quotes from qualified heating engineers in your area. You can then pick the best quote and get the best heating solution for your home.
Heating and Cooling Heat Pump installs a four-way reversing valve on the basis of ordinary air conditioners, and changes the operation of the valve, which can exchange the functions of the evaporator and the condenser of the original air conditioner, so as to change the function of cooling indoor air. Changed to the function of heating indoor air.
What are the structural advantages of the Heating and Cooling Heat Pump?
What is the user's experience with Heating and Cooling Heat Pump?
Why the use of Heating and Cooling Heat Pump can save resources?
The evaporator of the Heating and Cooling Heat Pump adopts the method of countercurrent heat exchange for heat exchange to enhance the heat exchange effect; moreover, the heat exchange method combining fins and tube bundles is used, and each row of heat exchange tubes is arranged in a cross. The method of turbulence increases the convective heat transfer coefficient on the exhaust side and enhances the heat transfer effect;
The refrigerant tube bundle of Heating and Cooling Heat Pump is made of red copper, and the fins are made of hydrophilic aluminum foil. The condensed water in the exhausted air drips on the surface of the heat exchanger to form a water film that is conducive to heat exchange, increasing the heat exchange coefficient and enhancing the heat exchange effect;
The Heating and Cooling Heat Pump has an advanced microcomputer control system, and adopts a special programmable controller PLC for imported air-conditioning equipment, which has the ability to resist electromagnetic interference, intelligent coupling between building load and unit heating; Display, fault alarm and diagnosis functions.
The Heating and Cooling Heat Pumpis also very comfortable, clean and safe. In the past, when burning coal, it was not only dirty, tiring and troublesome, but also the temperature was not high, usually 14-16 degrees, and you had to wear cotton-padded clothes at home. Now open to 18 degrees and wear a thin sweater. If the weather is cold, turn up the temperature. Anyway, the Heating and Cooling Heat Pump is also very convenient, and you can adjust the temperature by pressing a button.
The Heating and Cooling Heat Pump unit has the dual functions of supplying cold water in summer and supplying hot water in winter. Using air as the heat source and cooling source can greatly save water and avoid the pollution of water quality. The air-cooled modular cold and hot water unit can be placed on the top floor of the building or on the outdoor platform to work, eliminating the need for a dedicated cold source machine room and boiler room.
JNOD focuses on heat pump& electric boiler R&D, manufactures and provides comprehensive energy-saving solutions. Our sales team have extensive experience of overseas markets. We provide sincere and professional services, including OEM/ODM/project services, technology support, market analysis, usage of design and composition of installation.