











heating and cooling heat pump integrates air conditioning and heating systems, is comfortable and energy-saving, and will surely lead the market trend of comfortable home life in the future.
How exactly does the heating and cooling heat pump work?
What is the basic principle of heating and cooling heat pump?
Will the floor height affect the installation of the heating and cooling heat pump?
The common heating and cooling heat pumps on the market are almost all of combined cooling and heating, which solves the problems of cooling in summer and heating in winter through a set of equipment. In some specific areas (the temperature is relatively high in winter), the air energy heat pump can also be connected to the domestic hot water tank to provide 24-hour uninterrupted hot water for the family, so the air energy heat pump can be used for cooling and heating, as well as cooling and heating. And with domestic hot water, but in order not to affect the heating effect, the domestic hot water is generally not combined.
Basic principle of heating and cooling heat pump: it is mainly composed of compressor, heat exchanger, axial fan, thermal insulation water tank, water pump, liquid storage tank, filter, electronic expansion valve and electronic automatic controller. After the power is turned on, the axial flow fan starts to operate. The outdoor air is heat exchanged through the evaporator. The air with reduced temperature is discharged from the system by the fan. At the same time, the working medium inside the evaporator is sucked into the compressor. The compressor compresses the low-pressure working medium gas into high-temperature and high-pressure gas and sends it to the condenser. The water forcibly circulated by the water pump also passes through the condenser and is heated by the working medium and sent to the user for use, The working medium is cooled into liquid, which flows into the evaporator again after throttling and cooling by the expansion valve. In this way, the heat energy in the air is continuously "pumped" into the water, so that the water temperature in the insulation water tank gradually rises to about 55 ℃, which is just suitable for people to take a bath. This is the basic working principle of heating and cooling heat pump.
The floor height problem, many people think that the floor height of the elevator apartment is relatively low, and the installation of heating and cooling heat pump will cause the room to become depressed, but in fact, the installation of heating and cooling heat pump will not have much impact on the floor height. , The concealment of central air-conditioning can reduce the sense of oppression of the floor height through the reasonable planning of the ceiling, and the floor heating can also be laid by dry floor heating. The floor height is only increased by 3-4 cm, and the user cannot distinguish it with the naked eye.
Guangdong JNOD New Energy Technology Co., LTD. is the leading manufacturer sofa manufacturer specializing in heating and cooling heat pump. If you want to get more information, just go and connect them.
A heat pump is part of a heating and cooling system and is installed outside your home. Like an air conditioner, it can cool your home, but it’s also capable of providing heat.
An air-source heat pump works by transferring heat from the outside air to an indoor space. A fan draws in air from outside and transfers it to an evaporator, which is situated in the heat pump. A refrigerant circulates inside the pump, which changes its physical state and evaporates even at low temperatures. The refrigerant steam needs to be raised to a level where it can be used for your heating and hot water, so it’s compressed using a compressor. The heat produced in this process is transferred to the heating and hot water systems in your home.
In cooling mode, a heat pump absorbs heat inside your home and releases it outdoors. In heating mode, the heat pump absorbs heat from the ground or outside air (even cold air) and releases it indoors.
If you want to make your home even more eco-friendly, you could install JNOD heating & cooling heat pump, we have both R32 and R410A inverter model,.The heating capacity can be made from 10KW to 26KW, All-in-one & Monoblock type are available. This will help you to reduce your energy bills and your carbon footprint.
If you have any more questions, please contact us for get more details.
Compared with the traditional swimming pool heating method, the biggest advantage of Swimming Pool Heat Pump is that it can effectively improve the heating speed and constant temperature of the swimming pool, making the swimming pool water heating safer, more energy-saving and faster, so as to meet the different heating temperature requirements of the swimming pool.
Is the Swimming Pool Heat Pump safe to use?
What are the application advantages of Swimming Pool Heat Pump?
What are the benefits for consumers of the application of Swimming Pool Heat Pump?
Swimming Pool Heat Pump relies on the "reverse Carnot" principle to work, using clean and renewable raw materials (air energy + electricity) as energy, neither generating harmful gases to the human body nor causing pollution to the atmosphere. With only a small amount of electricity input, a large amount of heating benefits can be obtained, providing a 24-hour constant temperature for the swimming pool.
From the perspective of energy saving and safety, Swimming Pool Heat Pump is an ideal choice for indoor swimming pool heating equipment. It is powerful, stable and efficient. It adopts high-efficiency titanium bubble heat exchanger, which has high efficiency, corrosion resistance and ultra-high energy efficiency. Refrigeration accessories, high operating efficiency and energy saving. And it is safe and reliable, water and electricity are completely separated; it can also intelligently control, realize independent temperature control, intelligent defrosting, etc. It is widely used in various swimming pools, hotel swimming pools, SPA, hot springs, bubble pools, etc., and it is easy to use.
Swimming Pool Heat Pumpdoes not discharge any pollutants during operation, and there are no safety hazards such as fire, explosion, poisoning, etc., which is very safe and environmentally friendly. As a professional swimming pool constant temperature equipment, Tongyi Air Energy swimming pool special constant temperature heat pump is equipped with a triple disinfection filter protection system, which can automatically complete disinfection, adjust pH value, and collect tiny dirt and suspended particles (such as dandruff, dust, etc. in swimming pool water) ), hair and other pollutants, not only to ensure the cleanliness of the swimming pool water, but also to protect the normal operation of subsequent equipment, effectively reducing the workload of the staff. For swimming pool operators, Swimming Pool Heat Pump saves more than 65% of operating costs compared to hot water equipment using other energy sources, and the unit is fully automatic and intelligent, which greatly reduces labor costs.
The Swimming Pool Heat Pump keeps the indoor heated swimming pool at a constant temperature of 26-28 degrees. Normal swimming pools use cold water. Due to the low water temperature (0-10 degrees in winter, 10-20 degrees in summer), not many people can swim in cold water, especially children, the possibility of catching a cold is very high. The constant temperature swimming pool is heated by heating equipment and maintains a temperature of 26-28 degrees throughout the year, which is suitable for the human body and allows you to say goodbye to the risk of swimming colds.
Guangdong JNOD New Energy Technology Co., LTD. focuses on heat pump& electric boiler R&D, manufacturing and providing comprehensive energy-saving solutions.
JNOD has a complete heat pump industry chain, and its products involves Swimming Pool Heat Pump, House Heating & Cooling Heat Pump, Domestic Hot Water Heat Pump, Heat Pump Dehumidifier, Commercial & Industrial High Temperature Water Heating Solution, Industrial and Agricultural Heat Pump Dryer,etc.The ultra-low temperature EVI heat pump has been widely used, too.
As heat pumps are more and more popular in the market, people want to know if it's worthy to use it.
Of course Yes! Heat pump water heaters are worth the cost.
More Efficient
Heat pumps are significantly more energy efficient than normal electric or gas hot water heaters because instead of using energy to generate new heat, they collect existing ambient warmth and transfer it to the water. This efficiency can save you hundreds of dollars on energy bills each year.
Tax Incentives and Rebates
With tax incentives and state-sponsored sales rebates, energy efficient heat pump water heaters can actually be a more affordable choice than most homeowners would expect. Though the upfront cost is high, most homeowners pay back heat pump water heaters within the first or second year alone. And heat pump water heaters are long-lasting – a good, well-maintained heater can last between ten to fifteen years.
Environmentally Friendly
Because heat pumps are more energy efficient than conventional hot water heaters, they do not use as much electricity and/or natural gas, which reduces greenhouse gas emissions. In fact, it estimates that if all residential water heaters were replaced with heat pump water heaters, there would be up to 140 billion pounds of greenhouse gas emissions are saved annually.
We Jnod now provide various air to water heat pump, any question or need welcome to inquire us!
Our website:https://www.jnodheatpump.com
Hello everyone, We sincerely invite you to watch our live stream shows on Alibaba in 15th, April.
We will show you our hottest and newest electric boiler and heat pump during the live show.
Some latest market information about the boiler and heat pump products would be shared either.
If you don't want to miss our new arrivals, cost-effective and hot selling products, or have anything you want to communicate with us, welcome to meet us:
Link: https://www.alibaba.com/live/get-the-hottest-trending-electric-boiler_94691c7f-cc7a-4215-a000-2810192b9712.html?referrer=SellerCopy
Here's the link to watch our show:
DATE: April 15th ,2022
Time: 21:00-23:00PM
The operating principle of heat pump water heaters is very similar to that of air conditioning systems. It consumes a small amount of electrical energy to get the compressor running. The working fluid is compressed by the compressor into a liquid state with high temperature and high pressure, and then enters the condenser to release heat to heat the water. By circulating and heating in this way, the water can be heated from 50°C to 65°C.
What are the main components of heat pump water heaters?
How does the heat pump water heater work?
Why should the heat pump water heater be green?
Four main components of refrigeration technology: evaporator, compressor, condenser and throttling device.
Three stable parts: liquid storage tank (compressor), expansion valve (capillary tube), dry filter (filtering water and impurities)
A large piece of defrosting: four-way valve
Break through traditional energy conversion theory to achieve high energy efficiency:
When operating the heat pump, the working medium in the evaporator can absorb the energy QA stored in the ambient medium;
And starting the system must consume energy, that is, the power consumption of the QB compressor;
At the same time, the heat emitted from the working medium to the high temperature medium in the condenser is QC;
After the compressor input work starts the system, the mechanical kinetic energy becomes thermal energy. The energy output of the heat pump is thus the sum of the work done by the compressor QB and the heat absorbed by the heat pump from the environment QA; Enter a QB to get QB+QA and break the traditional bottleneck that conversion between different energies cannot achieve full efficiency; Heat pump technology is more energy efficient.
heat pump water heaters work according to the "reverse carnotic" principle, specifically the "outdoor unit" as a heat exchanger absorbs heat from the outside air, heats the low boiling working medium (refrigerant) and evaporates it, and the refrigerant vapor The water is compressed and heated by the compressor and enters the water tank, and the water in which the heat is released is condensed and liquefied and then throttled and pressurized to return to the outer heat exchanger to enter the next circuit. The heat pump water heater simply absorbs the heat in the air to heat the water, and the air that has absorbed the heat can also be used in the kitchen to solve the problem of stuffy heat.
The heat pump water heater has energy saving functions.
The biggest advantage of the heat pump water heater is undoubtedly the energy saving. The low-temperature thermal energy in the air is converted into high-temperature thermal energy by the compressor. Based on the same amount of hot water generation, the energy saving is maximized compared to the water heater with electric heating, and the cost of use is only 1/4 of the cost of electric water heater. Compared to gas water heaters, it consumes no gas fuel and the cost of use is only 1/3 of the cost of gas water heaters. heat pump water heaters take air as the main body and save energy, which not only saves people's usage cost, but also corresponds to the main body of energy saving in the world. This is one of the biggest highlights of air energy water heaters.
Guangdong JNOD New Energy Technology Co., LTD. Focus on research and development of heat pumps and electric boilers, manufacturing and providing comprehensive energy saving solutions.
With the widely known advantages of air energy heat pump products such as cleanliness, environmental protection, energy saving, stability and comfort, heating with Heating and Cooling Heat Pump products has become a trend. More and more northern == home users and schools, hotels, hospitals When transforming the original heating system in other places, choose to use Heating and Cooling Heat Pump.
Compared with ordinary central air conditioning refrigeration and gas wall-hung boiler heating, what are the advantages of Heating and Cooling Heat Pump?
What are the advantages of using the Heating and Cooling Heat Pump?
What is the working principle of Heating and Cooling Heat Pump?
The common heating and cooling equipment on the market is mainly fluorine system heating and cooling air conditioning or the combination of gas wall-hung boiler heating and central air conditioning refrigeration.
The main advantage of Heating and Cooling Heat Pump compared to ordinary heating and cooling air conditioners is high comfort. The fluorine system heating and cooling air conditioner directly controls the indoor temperature through the flow of the refrigerant, and the refrigerant directly exchanges heat with the air. This heat exchange method has two disadvantages: First, the temperature of the air outlet of the air conditioner is very low or very high (7°C-12°C during cooling, 40°C-50°C during heating), the body feels very bad, and it is bitingly cold in summer. The winter is hot and dry; second, although the fluorine system air conditioner has a relatively fast cooling and heating speed, it will also cause a large amount of moisture in the air to be taken away due to the rapid heating and cooling speed, resulting in excessive indoor dehumidification and drying.
1) The unit of Heating and Cooling Heat Pump has high energy efficiency ratio, energy saving and electricity saving.
2) The water temperature of the Heating and Cooling Heat Pump is generally constant at 12-22°C, which is 7°C for the water supply in summer, 12°C for the return water, 45°C for the water supply in winter, and 40°C for the return water, and the temperature difference between them is small. , so the unit has less work and more energy.
During the operation of Heating and Cooling Heat Pump, the evaporator absorbs heat from the ambient heat energy in the air to evaporate the heat transfer working medium. After the working medium vapor is compressed by the compressor, the pressure and temperature rise. When the high-temperature vapor passes through the special annular pipe bonded on the outer surface of the water storage tank, the condenser condenses into liquid and transfers the heat to the water in the water storage tank of air source heat pump.
Guangdong JNOD New Energy Technology Co., LTD. has focused on the development and production of Heating and Cooling Heat Pumps for several years. And it commits to providing perfect service for every customer from all over the world.