Heating And Cooling Heat Pump make money- China Manufacturers Suppliers Factory

With the Super September on Alibaba we will be here with you on our live steam show on Sept  16^th 0:00 Beijing Time.

This time will be mainly promote to you our newest product to support you in the energy war. Both our heat pump and electric boiler are high efficiency and energy saving.

A big discount up to 10% will be shared during the show.

Welcome to join us and feel free to get more information on our live show.

Time: Sept 16^th 0:00 & Sept 22^nd 0:00 Beijing Time.

Link & QR code:

https://www.alibaba.com/live/hottest-trending-electric-boiler-%2526amp%253B-heat_046ebf3a-1bef-42d4-9845-c638bcd7056d.html?referrer=SellerCopy

When the indoor swimming pool is used in winter, it is necessary to heat the pool water to make the water temperature reach 26-28 degrees, which requires a lot of thermal energy. Boilers, gas, and electricity are gradually eliminated due to their low thermal efficiency and environmental protection. More and more people will Option to use Swimming Pool Heat Pump. So in addition to environmental protection, what are the benefits of Swimming Pool Heat Pump?

Compared with traditional boilers, what are the advantages of Swimming Pool Heat Pump?

What advancements have the Swimming Pool Heat Pump made?

Why is the demand for Swimming Pool Heat Pump increasing?

Compared with traditional boilers, what are the advantages of Swimming Pool Heat Pump?

Compared with traditional boilers, Swimming Pool Heat Pump does not use any fuel such as coal, oil, gas, etc., and does not produce open flames and exhaust emissions. Therefore, the use of air source heat pumps not only protects the atmospheric environment, but also eliminates fire, explosion, poisoning, etc. Accident happens. Compared with ordinary electric water heaters, it consumes less power, avoids leakage accidents, saves energy and is environmentally friendly. Compared with solar water heaters, air energy heat pumps are not affected by weather, geography, climate and other factors when working Sunny can be used normally.

What advancements have the Swimming Pool Heat Pump made?

smart system

① The unit control system adopts intelligent control. When customers use it, they only need to set the air temperature, humidity, and pool water temperature, and then the equipment will enter the fully automatic operation state, and there is no need for special personnel to take care of it.

② Customers can learn air temperature, humidity and other data through the touch-type full-color screen. Real-time value of pool water temperature and operating status of equipment.

③ Customers can also choose a communication interface according to their needs to implement remote control, monitoring and connection with the system.

ventilation system

Customers can choose the intelligent ventilation system of Swimming Pool Heat Pump. After choosing this system, the unit will control the amount of fresh air entering the room according to the concentration of carbon dioxide in the room, which can greatly save the energy consumption during operation.

Why is the demand for Swimming Pool Heat Pump increasing?

Not only that, the advancement and development of sports equipment and facilities and equipment technology have also provided a foundation for more people to actively participate in fitness. Take swimming, the most popular sport, as an example. In the past, people swimming in open-air pools or public waters were easily limited by the temperature environment. If they accidentally caught a cold, it would be bad for their health, and microbial bacteria would grow in public waters. , the health situation is not optimistic. In recent years, with the advancement of Swimming Pool Heat Pump related supporting technical facilities, many swimming pools and other fitness places are equipped with heated swimming pools, and even schools, communities, villas, etc. are equipped with heated swimming pools, so that people can not only enjoy the hot summer. The fun of refreshing swimming can also have a comfortable swimming experience in the cold winter.

If you would like to receive more information about the Swimming Pool Heat Pump, please connect Guangdong JNOD New Energy Technology Co., LTD., and they will be happy to answer your question!

Heating and Cooling Heat Pump installs a four-way reversing valve on the basis of ordinary air conditioners, and changes the operation of the valve, which can exchange the functions of the evaporator and the condenser of the original air conditioner, so as to change the function of cooling indoor air. Changed to the function of heating indoor air.

What are the structural advantages of the Heating and Cooling Heat Pump?

What is the user's experience with Heating and Cooling Heat Pump?

Why the use of Heating and Cooling Heat Pump can save resources?

What are the structural advantages of the Heating and Cooling Heat Pump?

The evaporator of the Heating and Cooling Heat Pump adopts the method of countercurrent heat exchange for heat exchange to enhance the heat exchange effect; moreover, the heat exchange method combining fins and tube bundles is used, and each row of heat exchange tubes is arranged in a cross. The method of turbulence increases the convective heat transfer coefficient on the exhaust side and enhances the heat transfer effect;

The refrigerant tube bundle of Heating and Cooling Heat Pump is made of red copper, and the fins are made of hydrophilic aluminum foil. The condensed water in the exhausted air drips on the surface of the heat exchanger to form a water film that is conducive to heat exchange, increasing the heat exchange coefficient and enhancing the heat exchange effect;

The Heating and Cooling Heat Pump has an advanced microcomputer control system, and adopts a special programmable controller PLC for imported air-conditioning equipment, which has the ability to resist electromagnetic interference, intelligent coupling between building load and unit heating; Display, fault alarm and diagnosis functions.

What is the user's experience with Heating and Cooling Heat Pump?

The Heating and Cooling Heat Pumpis also very comfortable, clean and safe. In the past, when burning coal, it was not only dirty, tiring and troublesome, but also the temperature was not high, usually 14-16 degrees, and you had to wear cotton-padded clothes at home. Now open to 18 degrees and wear a thin sweater. If the weather is cold, turn up the temperature. Anyway, the Heating and Cooling Heat Pump is also very convenient, and you can adjust the temperature by pressing a button.

Why the use of Heating and Cooling Heat Pump can save resources?

The Heating and Cooling Heat Pump unit has the dual functions of supplying cold water in summer and supplying hot water in winter. Using air as the heat source and cooling source can greatly save water and avoid the pollution of water quality. The air-cooled modular cold and hot water unit can be placed on the top floor of the building or on the outdoor platform to work, eliminating the need for a dedicated cold source machine room and boiler room.

JNOD focuses on heat pump& electric boiler R&D, manufactures and provides comprehensive energy-saving solutions. Our sales team have extensive experience of overseas markets. We provide sincere and professional services, including OEM/ODM/project services, technology support, market analysis, usage of design and composition of installation.

1. Eco Friendly

Compared to the on/off heat pump, inverter heat pump is much friendlier to the environment owing to their sudden fluctuation detection capabilities and automatic adjustments made to the compressor speed. This highly sophisticated yet innovative mechanism helps save energy, providing benefits to the environment.

2. Energy Efficient and save money

The inverter technology is considered a perfect solution when it comes to energy-efficiency and economical operation. In an inverter model from a heat pump inverter manufacturer, the cooling and heating are automated in an energy-efficient and seamless manner whereas earlier technologies used to consume a lot of electricity irrespective of the required usage.This will be good to cut-off your electricity bill.

3. Soundless operation

The compressor motor used by DC inverter heat pump manufacturer does not turn on and off all the time but keeps working at low power. This kind of machine makes the operation more quite.
Unlike non-inverters, they don't automatically turn on and off every time they reach a certain temperature; instead, they just cruise along maintaining and regulating the temperature constantly.

4. Long Life

The technology and hardware employed in DC inverter model by DC inverter heat pump supplier not only makes the cooling and heating effect more efficient, but also makes the unit last longer. Contrary to the operation of a non-inverter unit, the inverter uses less power and as a result, they work less, meaning that they are less prone to wear and tear.

5. Faster Cooling/Heating

The DC inverter heat pump is able to cool and heat your room faster than its non-inverter counterpart. This is due to the fact that an inverter heat pump unit operates on a variable speed compressor rather than at a fixed speed one. This process ensures rapid air conditioning effects via faster variable speed allowing the compressor to run at full power only when required while constantly regulating the temperature as per end user's desire.

6. Smart Capabilities

A smart DC Inverter heat pump will provide you complete control over energy consumption and usage through your PC and portable smart devices. Moreover, it will give you complete insights about all technical metrics such as watts, voltages, current and units consumed. A smart heat pump also lets the user schedule the heat pump to automatically turn itself on or off. Operations of a heat pump are more flexible and centralized when it is smart.

Please feel free to contact our JNOD sales team when you get more information.

The Heating and Cooling Heat Pump is driven by an electric motor, uses the heat in the air as a low-temperature heat source, exchanges heat through the air conditioner condenser or evaporator, and then passes through the circulation system to extract or release heat energy, and use the unit circulation system to transfer the energy to the building. It can meet the needs of users for domestic hot water, floor heating or air conditioning.

What is the cycle between the Heating and Cooling Heat Pump and the natural environment?

What is the principle of Heating and Cooling Heat Pump?

Does the Heating and Cooling Heat Pump make noise?

What is the cycle between the Heating and Cooling Heat Pump and the natural environment?

The compressor outlet of the Heating and Cooling Heat Pump is high-temperature and high-pressure gas, which is transformed into a high-pressure and low-temperature vapor-liquid mixture through the heat exchange of the condenser. The low-temperature gas enters the evaporator to evaporate and absorb heat, and absorb the low-grade heat energy from the outside world (which can be rivers, lakes, groundwater, underground soil layers, air, etc., which we call water source, ground source, and air source heat pump), and finally the evaporator comes out. The low pressure gas enters the compressor to complete the cycle.

What is the principle of Heating and Cooling Heat Pump?

Heating and Cooling Heat Pump is an evolved product of air conditioners. An electromagnetic four-way valve (also known as a reversing valve) is installed in the refrigeration system. Through the switching direction of the four-way valve, the flow direction of the refrigerant is changed, and the air conditioner can hot. The high-temperature and high-pressure vapor-like refrigerant discharged from the compressor flows to the condenser in the heat preservation water tank, transfers heat to the tap water passing through the water tank, and then throttles and reduces the pressure through the expansion valve, and evaporates and absorbs heat in the evaporator of the main outdoor heat pump group. Use the working fluid to absorb the heat in the outdoor air. The Heating and Cooling Heat Pump absorbs the heat in the outdoor air and transfers it to the tap water in the insulated water tank. It is more energy-saving, fast and safe than simply heating with an electric heater, and the outdoor thermal energy potential is infinite.

Does the Heating and Cooling Heat Pump make noise?

Noise problem, almost all of today's Heating and Cooling Heat Pumps use full frequency conversion technology, indoor unit frequency conversion, heat pump host frequency conversion, fan frequency conversion, etc. The noise value of the heat pump host is below 45 decibels, and the indoor noise is still below 20 decibels. Neither users nor neighbors will be affected.

JNOD has a complete heat pump industry chain, and its products involve Swimming Pool Heat Pump, House Heating & Cooling Heat Pump, Domestic Hot Water Heat Pump, Heat Pump Dehumidifier, Commercial & Industrial High Temperature Water Heating Solution, Industrial and Agricultural Heat Pump Dryer, etc. The ultra-low temperature EVI heat pump has been widely used, too.

The working principle of the Heating and Cooling Heat Pump is a mechanical device that forces heat to flow from a low temperature object to a high temperature object in a reverse cycle. The applied low-grade thermal energy is utilized to achieve the purpose of energy saving.

How does the Heating and Cooling Heat Pump perform cooling and heating respectively?

What is the principle of Heating and Cooling Heat Pump?

Why is Heating and Cooling Heat Pump so practical?

How does the Heating and Cooling Heat Pump perform cooling and heating respectively?

When the air conditioner cools down in summer, the Heating and Cooling Heat Pump operates according to the cooling condition, and the high-pressure steam discharged from the compressor enters the condenser through the reversing valve (also known as the four-way valve); when heating in winter, the reversing valve Turn to the working position of the heat pump, so the high-pressure refrigerant vapor discharged from the compressor flows into the indoor evaporator (used as a condenser) after passing through the reversing valve, and the latent heat released when the refrigerant vapor condenses heats the indoor air to achieve indoor heating purposes. The condensed liquid refrigerant flows in the reverse direction through the throttling device into the condenser (used as an evaporator), absorbs external heat and evaporates, and the evaporated steam is sucked by the compressor after passing through the reversing valve to complete the heating cycle. In this way, the Heating and Cooling Heat Pump "pumps" the heat from the outside air (or circulating water) into the room with a higher temperature, so it is called a "heat pump"

What is the principle of Heating and Cooling Heat Pump?

When the air conditioner cools down in summer, it operates according to the refrigeration condition. The high-pressure steam discharged from the compressor by the Heating and Cooling Heat Pump enters the condenser through the reversing valve (also known as the four-way valve), and the refrigerant vapor is condensed into liquid. The flow device enters the evaporator, absorbs heat in the evaporator, cools the indoor air, and the evaporated refrigerant vapor is sucked by the compressor after passing through the reversing valve, and this cycle is repeated to realize the refrigeration cycle.

Why is Heating and Cooling Heat Pump so practical?

Heating and Cooling Heat Pump can operate normally between -27℃-48℃, and some low-temperature air-energy heat pumps are also capable of -35℃ ambient temperature, and still maintain normal operation. In our environment, a It can be used all-weather all year round, and will not be affected too much by rainy, windy and snowy weather, nor will it be affected by low temperature at night. However, solar heating equipment is greatly affected by environmental factors. In the case of insufficient light, it is difficult to achieve the effect of indoor heating, especially in areas with low ambient temperature in winter.

Guangdong JNOD New Energy Technology Co., LTD. provided marketing consultancy services and business solutions for customers from over 40 countries. tailor-make solution of hot water supply base on customer's market demand.

The heating and cooling heat pump is a highly efficient, energy-saving device that makes full use of inferior thermal energy. Heat can be transferred spontaneously from a hot object to a cold object, but not spontaneously in the opposite direction.

How does the heating and cooling heat pump work?

What does the operating time of the heating and cooling heat pump have to do?

What is the function of the heating and cooling heat pump?

How does the heating and cooling heat pump work?

In the heating and cooling circuit of the heat pump, the heat Q0kcal/h is obtained from the low temperature heat source (outside air or circulating water whose temperature is higher than the evaporation temperature t0) and the mechanical work ALkcal/h is consumed, while the heat of Q0kcal/h is obtained from the low temperature heat source (outside air or circulating water whose temperature is higher than the evaporation temperature t0) and the mechanical work ALkcal/h is consumed. The heating system) provides the heat of Q1kcal/h, and the relationship between these heats corresponds to the first main law of thermodynamics, ie Q1=Q0+ALkcal/h

If the heating and cooling heat pump is not used and the heat is converted by mechanical work (or the high temperature heat source is heated directly by electrical energy, the heat obtained is ALkcal/h, and after the heat pump device is used, the high temperature heat source (heating system) receives more heat is obtained: Q1-AL=Q0, kcal/h This heat is obtained from a low temperature heat source, and this heat cannot be obtained without a heat pump device. Therefore, using a heat pump device can save fuel and use waste heat.

What does the operating time of the heating and cooling heat pump have to do?

The working cycle of a heating and cooling heat pump is exactly the opposite of that of a thermal engine. A thermal engine uses the energy of a high-temperature heat source to generate mechanical work, while a heat pump transfers heat from a low-temperature heat source to a high-temperature object by consuming mechanical work.

If the heat pump and the heat engine have two identical heat source temperatures, the thermal efficiency of the heat engine cycle is η=AL/Q1; the energy index of the thermal engine cycle – the heat conversion coefficient φ=Q1/AL, i.e. φ=1/η. The value of η is always less than 1, so the value of φ is greater than 1.

If the refrigerator and the heat pump have two identical heat source temperatures, the relationship between them is φ=Q1/AL=(Q0+AL)/AL=e+1, where η is the refrigerator's cooling coefficient. It can be seen that the minimum value of the heat transfer coefficient φ η1 and in this limit case Q0 E0, that is, no heat is absorbed from the low temperature heat source.

What is the function of the heating and cooling heat pump?

Green simultaneous universal heat pump for heating and cooling

We offer not only advanced, energy-efficient heat pumps with advanced inverter technology, but also a complete solution for heating, cooling and hot water supply of residential buildings.

WiFi remote control

The heating and cooling heat pump can be controlled via Wi-Fi, allowing users to operate their heat pumps anytime, anywhere.

Three in one function mode

Hot water (DHW) + Heating and cooling.

Guangdong JNOD New Energy Technology Co., LTD. Focus on research and development of heat pumps and electric boilers, manufacturing and providing comprehensive energy saving solutions.

Heating and Cooling Heat Pump has the characteristics of comfort, energy saving, stability, environmental protection, safety, long service life, wide application range and one machine dual use in actual use, which makes Heating and Cooling Heat Pump more popular,favored by users.

What are the advantages of Heating and Cooling Heat Pump?

Why are more and more consumers choosing Heating and Cooling Heat Pump?

What installation conditions are the Heating and Cooling Heat Pump suitable for?

What are the advantages of Heating and Cooling Heat Pump?

1. Safe operation and environmental protection

Heating and Cooling Heat Pump adopts the form of heat pump heating, water and electricity are completely separated, no coal or natural gas is needed, and it will not pollute the environment, and there is no need to worry about the leakage of refrigerant to pollute the environment.

2. Flexible and unlimited use

Heating and Cooling Heat Pump Compared with solar, gas, water ground source heat pumps, air source heat pumps are not limited by geology and gas supply, and are not affected by bad weather such as night, cloudy, rain and snow, so they can Realize safe operation 24 hours a day throughout the year.

3. Energy-saving technology, power saving and worry-free

Heating and Cooling Heat Pump is efficient and environmentally friendly. Compared with electric heating, it saves 75% of electricity bills per month, saving users considerable electricity bills.

Why are more and more consumers choosing Heating and Cooling Heat Pump?

Heating and Cooling Heat Pump can use floor heating as the heating end when heating. The comfort of floor heating is well known. It conforms to the traditional Chinese medicine theory of warm feet and cool top, giving people a feeling of warm feet and cool head. And the upper pass, the room is warm and cool, giving people a natural and comfortable feeling. Of course, radiators and fan coil units can also be selected at the end of indoor heating (when the water supply temperature is 35°C-45°C, the indoor floor heating can be used as the end; when the water supply temperature is 40°C-50°C, the indoor fan coil can be used as the end. The end; when the water temperature is above 55℃, the radiator can be used as the end in the room).

What installation conditions are the Heating and Cooling Heat Pump suitable for?

The main unit of the Heating and Cooling Heat Pump is similar to the outdoor unit of the central air conditioner, and can be installed in the outdoor unit of the central air conditioner, and the air energy heat pump has the functions of cooling and heating, as long as sufficient ventilation and ventilation environment is ensured, for other installations conditions are relatively low. However, when considering the installation factors of solar heating equipment, it is especially necessary to pay attention to the lighting conditions. It is difficult for ordinary elevator apartments to find suitable installation conditions.

For more information about Heating and Cooling Heat Pump, please contact Guangdong JNOD New Energy Technology Co., LTD., Ltd. has committed to providing the increasing of Heating and Cooling Heat Pump, and make them more effective, reliable, and consistent.

2022-11-24 · Takagi T-H3-DV-N Condensing High Efficiency Natural Gas Indoor Tankless Water Heater, 10-Gallon Per Minute, 199,000 BTU View on Amazon SCORE 9.7 TR Score TR Score is a ranking system developed by our team of experts. It from 0 to 10 are automati

R32 14kw 220~240V/380~415V EVI Air Source Monoblock Heating And Cooling Heat Pump. Energy class:A Function:Heating and Cooling and Domestic Hot Water. Advantage:Full DC inverter Panasonic compressor and fan motor. Warranty:2 years

i-Aquatech Swimming Pool Heat Pump AquaWarm i-ExpertLine AquaWarm i-ForceLine AquaWarm i-GreenLine AquaWarm MegaLine AquaWarm EasyLine AquaWarm SpecialLine …

Cheap Price Jiadele Swimming Pool Mat Heater Mini Split Compressor For Seeker 25KW Air Source Heat Pump for Inground Pool Model NO. JDLKRY-E2 ? Contact Now Add To Inquiry Basket Jiadele Cheap Price Full Certikin Swimming China Swimming Pool Pump Commercial 15Kw Inverter Swimming Pool Air Source Heat Pump Model NO. JDLKRY-E2 ? Contact Now

2022-11-23 · 热泵烘干机 用高效热泵烘干机替换您的传统燃气烘干机，并观察您的能源使用量下降至少 28%。 获得回扣 热泵 使用可根据季节将热量移入或移出家中的热泵享受全年的舒适和节省 - 用于加热或冷却。 节省 1,000 美元 资源 伯克利市的 HPWH 页面 HPWH 居民智能指南 硅谷清洁能源的 HPWH 买家指南 圣何塞市的全电动生活方式传单的好处 做一些家居装修？ 现在是获得 …

2020-12-31 · The central role of heating and cooling in energy transition has also been recognised under the European Green Deal’s Climate Target Plan and the ‘Fit for 55’ package, as without increasing renewable energy shares in this large sector, the EU’s energy and climate targets cannot be achieved cost-effectively. Accelerate the development of renewables

The global pool heat pump market was valued at USD 5.86 billion in 2021 and is expected to reach USD 7.99 billion by 2027, growing at a CAGR of 5.31%. Swimming Pool heat pumps are …

Venus Heat Pump Water Heaters are the right solution for domestic hot water applications. Get non-stop hot water anywhere in the house while saving as much as 75-80% on your heating costs. View Complete Details Get Latest Price Request a quote RNS Engineering Services Company New Delhi GST- 07ABBFR6361H1Z4 View Mobile Number Verified Supplier