Heating And Cooling Heat Pump manufacturer- China Factory Manufacturers Suppliers

In recent years, the potential energy of the sports industry under the national fitness, and favorable policies such as swimming into the high school entrance examination sports, the constant temperature swimming pool was once in short supply, and the Swimming Pool Heat Pump was out of stock.

What is the first stage of the workflow of Swimming Pool Heat Pump?

What is the second stage of the workflow of Swimming Pool Heat Pump?

What should we pay attention to when using Swimming Pool Heat Pump?

What is the first stage of the workflow of Swimming Pool Heat Pump?

In the first step, the indoor hot and humid air in the swimming pool first exchanges heat with the outdoor fresh air through the heat exchanger to become warm and humid air, and then the warm and humid air flows through the evaporator, the temperature drops, and the water vapor condenses into cold water droplets and is separated from the air. Make the air dry and realize the function of air dehumidification; at the same time, the heat energy (latent heat and sensible heat) is released in the process of air cooling, water vapor condensation and cooling are absorbed by the refrigerant.

What is the second stage of the workflow of Swimming Pool Heat Pump?

In the second step, the heat energy absorbed by the refrigerant first (latent heat) heats the pool water through the heat exchanger to realize the pool water heating function: the residual heat (sensible heat) passes through the air condenser to heat the cooled indoor air to realize the air insulation function. In the severely cold winter, when the energy available for the heat pump to extract in the air is too small, and the heat energy recovered by the heat pump is not enough to meet the requirements of the indoor air temperature, the auxiliary air heater is added to supplement the heat energy required for the indoor hot air. The Swimming Pool Heat Pump only needs to provide its own operating power, that is, it runs continuously according to the above working procedures, and achieves a harmonious balance of the three functions of pool water heating, air conditioning and dehumidification with low energy consumption.

What should we pay attention to when using Swimming Pool Heat Pump?

1. When maintaining and cleaning the Swimming Pool Heat Pump, make sure that the Swimming Pool Heat Pump is in a power-off state. In addition, when the heat pump is not in use: the power supply should also be cut off.

2. Do not use gasoline, Tianna water, volatile oil, solvents and other chemicals, or liquid pesticides on the Swimming Pool Heat Pump, otherwise it may cause parts to crack and deform.

3. The area around the Swimming Pool Heat Pump should be kept dry and well ventilated.

4. Regularly clean the air-side heat exchanger to maintain a good heat exchange effect. If the shutdown time is long, the water in the pipeline of the unit should be drained, the power supply should be cut off, and the protective cover should be put on. When it is necessary to use it again, the system must be thoroughly checked before turning it on.

After reading, do you have a deeper understanding of Swimming Pool Heat Pump? For further information, please contact Guangdong JNOD New Energy Technology Co., LTD. They will be very pleased to help you.

Swimming Pool Heat Pump is used to maintain the temperature of swimming pool water. Swimming Pool Heat Pump, because the indoor swimming pool generally maintains the water temperature at 26℃~28℃ and the air temperature at 28℃~30℃ (the air temperature is 1℃~2℃ higher than the water temperature).

What is the reason for the continued popularity of the Swimming Pool Heat Pump?

Why is Swimming Pool Heat Pump in demand?

What metrics should be considered for Swimming Pool Heat Pump?

What is the reason for the continued popularity of the Swimming Pool Heat Pump?

Not only swimming pools, but also from hotels to fitness clubs, heated swimming pools are becoming more and more indispensable, and the power consumption of constant temperature heating equipment has become one of the power consumption concerns of swimming pool owners, and its operating cost should not be underestimated.

Faced with the phenomenon that the market is in short supply, for many swimming pool owners who are eager to generate income, how to improve the energy efficiency utilization rate of the swimming pool constant temperature heat pump, ensure the efficient operation of the swimming pool in the low temperature climate, extend the popularity to the four seasons, and realize the full swimming pool. Annual business has become a key upgrade direction.

Why is Swimming Pool Heat Pump in demand?

Since the water temperature of indoor swimming pools is generally kept at 26°C~28°C, and the air temperature is kept at 28°C~30°C (the air temperature is 1°C~2°C higher than the water temperature), for lighting needs, the walls are mostly glass walls or glass structures. Because the pool water contains a lot of chlorine, with the continuous evaporation of the water in the pool, the air humidity is high, and the humid air causes a lot of condensation on the walls or glass, which is bound to cause strong corrosion to the interior decoration of the building. In addition, because humid air contains a large number of viruses, bacteria and other elements that reduce air quality, it can make it difficult for people to breathe, so indoor swimming pool temperature and humidity control are getting more and more attention. Swimming Pool Heat Pump has also attracted the attention of consumers.

What metrics should be considered for Swimming Pool Heat Pump?

Swimming Pool Heat Pump considers indoor air quality, and the constant temperature heat removal pump unit is equipped with fresh air treatment function and exhaust air function.

Swimming Pool Heat Pump considers the operating cost of the constant temperature heat removal pump unit. In the spring and autumn, a large amount of outdoor low-humidity fresh air can be used to adjust the humidity of the indoor air to reduce the operating cost.

In order to prevent the circulating air from affecting the service life of the equipment, the key components and sheet metal structure of the Swimming Pool Heat Pump are treated with anti-corrosion during the manufacturing process, and the compressor, power distribution cabinet and control system are isolated from the wind system.

After reading, do you have a deeper understanding of Swimming Pool Heat Pump? For further information, please contact Guangdong JNOD New Energy Technology Co., LTD.

The hot water produced by the heat pump water heater is directly sent to the user through the circulation system as hot water supply or small area heating is carried out by using the fan exhaust pipe. Air source Heat Pump Hot Water Heater is currently the best solution for large, medium and small hot water centralized supply systems in school dormitories, hotels, bathing centers and other places.

Why choose Heat Pump Hot Water Heater?

Where is the better place to install the main unit and water tank of the Heat Pump Hot Water Heater?

What is Heat Pump Hot Water Heater?

Why choose Heat Pump Hot Water Heater?

1. Safety

The Heat Pump Hot Water Heater has the potential safety hazard of leakage, and the gas water heater has the danger of gas poisoning. Compared with these two water heaters, the air energy water heater exchanges heat through the medium, which avoids the direct contact between the electric heating element and the water, which solves the problem. Second, because the raw material of Heat Pump Hot Water Heater is air, it also eliminates the possibility of gas explosion or gas poisoning in gas water heaters, allowing people to use it more comfortably and worry-free.

2. Environmental protection

Energy saving and environmental protection complement each other, and environmental protection is another plus point of Heat Pump Hot Water Heater in its energy saving advantages. First of all, the air energy water heater uses electric energy to compress air to produce heat energy, and does not emit waste gas and toxic gas, which is not only safe, but also creates a pollution-free bathing environment. Secondly, the use time of Heat Pump Hot Water Heater is as long as 15-20 years. The long lifespan can not only reduce the cost and trouble for people to replace the water heater, but also reduce waste production in a sense, which is also an important aspect of environmental protection. aspect.

Where is the better place to install the main unit and water tank of the Heat Pump Hot Water Heater?

Answer: The Heat Pump Hot Water Heater is the best choice to install it on the balcony or bay window. The advantage is that it does not occupy indoor space, it is safe and stable, and the entire hot water piping system will have sufficient hot water; the host is installed in a ventilated and sunny place. it is good. Bay windows or wall hangings can allow the host to absorb heat from the air as much as possible to improve heating efficiency. It is understood that more than 90% of users will choose this installation method.

What is Heat Pump Hot Water Heater?

All-in-one Heat Pump Water Heaters and Split Type Heat Pump Water Heater are included in this hot water series, both on/off and inverter is available. Eco-friendly R32 and R410A refrigerant are adopted, as well the world famous Mitsubishi compressor. This series is widely used in residential and commercial hot water projects.

JNOD insisted on developing with technology innovation, it possessed of several national famous technicians and had invented multiply product patents. The company has been strictly implement the ISO international quality management system, and the products are of reliable guaranteed quality.

A swimming pool heat pump works to keep a constant pool temperature and extend the swimming season. According to Arizton’s report, the pool heat pump market is expected to grow at a CAGR of over 5% during 2019−2025.

JNOD has our swimming pool heat pump to meet the market request.

For the swimming pool heat pump,we have the:

Residential on/off swimming pool heat pump,we can make the heating capacity from 3KW to 25kw.

Residential inverter swimming pool heat pump,we can make the heating capacity from 5kw to 28kw.

We can have the R32 and R410A model,we can make both plastic and metal out case.

It’s with 4 ways valve,provide both heating and cooling mode to create more possibility for pool enjoyment.The high performance, energy-efficient pool heat pump quietly and economically allows you to swim comfortably throughout the year!

Some customers may ask what’s the different between Residential on/off and inverter swimming pool heat pump.

It is very similar to the concept of air conditioning inverter technology.

On/Off is defined as “all or nothing “,the input power or the heating capacity keeps the same.

For the inverter system ,Unlike ON/OFF heat pump with single-speed compressor which by switching on and off periodically to adjust the performance of the heating & cooling, full inverter heat pump uses a variable speed compressor which can automatically adjust the output needed at the lowest consumption of power and maintain the best temperature at different climatic conditions. When the heating demand is high, the inverter compressor and the fan motor will start running at a high speed, inversely, they will run at a low speed.

The advantages included:

1.Achieve an extremely high COP.

2.Shorten heating time.

3.Greatly save energy and cut down electricity bill.

4.Contribute to a quiet neighbor environment.

Some customer told me,their swimming pool is not very big.

Here come a mini swimming pool heat pump will be suitable for you.

We have both 3KW and 5KW heating capacity model.

The mini heat pump is designed for above-ground pools.It’s light and easy to install,can be portable every where.Equipped with a plug & play power connection.

Besides the Residential swimming pool heat pump model,we also have the commercial swimming pool heat pump with full inverter technology meets your comfort needs coupled with energy-efficient operation, which is applied in commercial settings, including water parks, hotels, gyms, and so on.

OEM and ODM project are acceptable.Just contact JNOD sales team to get more information.

With the Super September on Alibaba we will be here with you on our live steam show on Sept  16^th 0:00 Beijing Time.

This time will be mainly promote to you our newest product to support you in the energy war. Both our heat pump and electric boiler are high efficiency and energy saving.

A big discount up to 10% will be shared during the show.

Welcome to join us and feel free to get more information on our live show.

Time: Sept 16^th 0:00 & Sept 22^nd 0:00 Beijing Time.

Link & QR code:

https://www.alibaba.com/live/hottest-trending-electric-boiler-%2526amp%253B-heat_046ebf3a-1bef-42d4-9845-c638bcd7056d.html?referrer=SellerCopy

Heat pump water heater is a new type of water heater. It converts air energy into heat energy through a heat pump to produce hot water. This water heater solves the disadvantage that solar energy cannot be used on rainy days. In addition, this water heater is more efficient compared to gas water heaters and electric water heaters. Environmental protection when you choose this water heater is a very good choice.

What is the main reason why air heat pump water heaters are popular in the market?

What is the workflow of a heat pump water heater?

What do you know about heat pump water heaters that can be used in hotels?

What is the main reason why air heat pump water heaters are popular in the market?

Air Source Water Heater is a new type of low carbon and environmentally friendly water heater. The operating cost of heat pump water heaters is only 1/4 of the cost of electric water heaters, which is very energy-saving and efficient. Originally, as a fourth-generation air water heater, its greatest feature is safety and money-saving! The operating costs of the air water heater are only 1/4 of the electric water heater, 1/6 of the gas water heater, 1/2 of the solar water heater, 2/3 of the fuel water heater and 3/5 of the gas heating system. The device absorbs the heat in the air to heat the cold water, and the cool air released does not pollute the environment and completely eliminates the safety risks such as flammability, explosion, electric shock and gas poisoning of ordinary water heaters.

What is the workflow of a heat pump water heater?

1. The compressor compresses the low pressure refrigerant flowing back and converts it into a gas with high temperature and high pressure for discharge.

2. The high temperature and high pressure refrigerant gas flows through the copper pipe wrapped around the outside of the water tank, and the heat is passed through the copper pipe into the water tank. The cooled refrigerant becomes liquid under constant pressure and enters the evaporator after passing the expansion valve.

3. As the pressure of the evaporator is suddenly reduced, the liquid refrigerant is quickly evaporated into a gaseous state and absorbs a large amount of heat.

4. At the same time, under the action of the fan, a large amount of air flows through the outer surface of the evaporator, the energy in the air is absorbed by the evaporator, the air temperature drops quickly, and cold air is released and released.

5. The refrigerant that has absorbed a certain amount of energy is then returned to the compressor and enters the next circuit.

What do you know about heat pump water heaters that can be used in hotels?

JNOD hot water heat pumps provide a highly efficient means of heating hot water for commercial and industrial applications. An average COP of 4.2 means that the energy efficiency is more than four times higher than that of conventional water heaters. It removes heat energy from the ambient air. This means savings of 60.75% of energy costs compared to electric water heaters.

Guangdong JNOD New Energy Technology Co., LTD. Provides marketing consulting services and business solutions to customers from over 40 countries. Customized solution for hot water supply based on the customer's market demand.

In the Heating and Cooling Heat Pump structure, the refrigerant directly exchanges heat with the air to be treated, without secondary heat exchange in the middle, which reduces the intermediate heat exchange links, which can effectively reduce the energy consumption of the system and improve the heat exchange efficiency.

What is the technological advancement of Heating and Cooling Heat Pump compared to traditional air conditioners?

Where can Heating and Cooling Heat Pump be used?

Why does Heating and Cooling Heat Pump become the choice of more and more consumers?

What is the technological advancement of Heating and Cooling Heat Pump compared to traditional air conditioners?

The refrigeration principle of the traditional air conditioner is to use the change of the physical state of the refrigerant. The change from the gaseous state to the liquid state will emit heat, and the change from the liquid state to the gaseous state will absorb heat. The "reverse Carnot" cycle used for Heating and Cooling Heat Pump is opposite to the refrigeration principle of traditional air conditioners. Using a "four-way electromagnetic reversing valve", a refrigeration cycle or a heating cycle can be realized, so that the car can get cold or hot air. . In the cycle of air-conditioning refrigerant, a large amount of heat will be released during the process of liquefying high-temperature and high-pressure gas into high-pressure liquid in the condenser, which is the principle of heat pump heat release. In winter, the reversing valve can be used to change the flow direction of the air-conditioning refrigerant. At this time, the evaporator acts as a condenser to release heat in the reverse cycle, forming a "heat source". At this time, only a small amount of electricity is consumed, and a large amount of heat from the outside can be transported and "pumped" into the pure electric vehicle to become a heat pump. However, the heating effect of heat pumps in low temperature environments needs to be improved.

Where can Heating and Cooling Heat Pump be used?

The heating principle of Heating and Cooling Heat Pump is completely different from that of traditional solar water heaters. Air source heat pumps use air, water, solar energy, etc. as low-temperature heat sources. The hot water is directly sent to the user through the circulation system as hot water supply or small area heating using fan coil units. Heating and Cooling Heat Pump is the best solution for large, medium and small hot water centralized supply systems in school dormitories, hotels, bathing centers and other places.

Why does Heating and Cooling Heat Pump become the choice of more and more consumers?

Heating and Cooling Heat Pump is one of the most advanced energy utilization products in the world today. With the rapid development of the economy and the improvement of people's living standards, hot water for domestic use has become a necessity for people's lives. However, traditional water heaters (electric water heaters, fuel-fired water heaters, and gas water heaters) have disadvantages such as high energy consumption, high cost, and serious pollution; The operation of energy-saving and environmentally friendly solar water heaters is restricted by meteorological conditions.

After reading these words, do you have a interest to order an Heating and Cooling Heat Pump ? If necessary, you can contact Guangdong JNOD New Energy Technology Co., LTD., which is an advance Heating and Cooling Heat Pump Manufacturer.

Heat pumps can both heat and cool because they are made with a component called a reversing valve. This valve allows the heat pump to change the flow of refrigerant in the system, so it can operate in either cooling or heating mode. During the winter, in heating mode, the heat pump absorbs heat from the surrounding air, concentrates it in the heat exchanger and blows the air into your home. In the summer months, the heat pump removes the heat and humidity from your indoor air and transfers it to the outside.

For the heating & cooling heat pump,we have both R32 and R410A inverter model,.The heating capacity can be made from 10KW to 26KW, All-in-one & Monoblock type are available.

Benefits of JNOD Heat Pumps:

Adopting Mitsubishi inverter dedicated compressor.

Which designed for the low temperature operation specially, -25℃ running stably.

Super High Efficiency A+++

Air-to-water heat pump is specially developed through cutting-edge energy-saving technology to reach the highest A+++ energy rating to meet the stringent requirements for energy efficiency.,contributing to environmental protection while significantly reducing energy bills for customers.

DC Inverter EVI Technology

DC Inverter EVI Technology can effectively reduce power consumption and improve the heating capacity of heat pump units to ensureperatures as low as -25℃，which helps to offer the users optimum house heating and hot water supply all year round.

If you want to know more information, please feel free to contact us.

Heating definition at Dictionary, a free online dictionary with pronunciation, synonyms and translation. Look it up now!

2021-3-22 · The SANC02 is the first heat pump water heater with an exterior compressor to hit the Canadian market. It's important to note that heat pumps …

There are 24 Leomon air source swimming pool heat pump units BRR-8OF and RBR-36F 3, with a total designed input power of approximately 240KW. Actual operation and economic benefit comparison: The Leomon air source swimming pool thermostatic heat pump system has been officially put into operation since November 2010.

2022-3-18 · A swimming pool heat pump works to keep a constant pool temperature and extend the swimming season. According to Arizton’s report, the pool heat pump market is expected to grow at a CAGR of over 5% during 2019?2025. JNOD has our swimming pool heat pump to meet the market request. For the swimming pool heat pump,we have the:

Factory Price 3HP 60Hz 8450gph Swimming Pool Pump for in/Above Ground with UL ETL CE FOB Price: US

Description of DC Inverter Residential 15kw Swimming Pool Heat Pump: 1) R410A refrigerant, environmentally friendly. 2) Titanium heat-exchanger, corrosion resistance.

Brand: Rio water Heat pump. Usage/Application: Heaters. Size: 100/200/300/500/ LPH AVAILABLE. We are one of the leading supplier of Hot water pump , read more... Aqua Gear. Nashik 02, Muskan Soc, Pan Ranagar, Nashik - 422008, …

Heat Pump Water Heater, Capacity: 100lph To 50000lph ? 1 Lakh Aqua Gear Contact Supplier Heat Pump Water Heater ? 50,000 Chem Dist Process Solutions Contact Supplier Heat Pump Water Heater, 360-440 V, 1.35kw ? …