











In fact, the working principle of the Heat Pump Hot Water Heater does not differ significantly from the working principle of our air conditioning system. However, our household air conditioners use the cold end (evaporator) of the cooling circuit system; In contrast, heat pumps use the hot end (condenser) of the circulatory system.
What is the spring of air simultaneous heating and cooling heat pump for homes?
How does the Heat Pump Hot Water Heater provide hot water?
What is the current market situation for Heat Pump Hot Water Heaters?
● Brushless DC inverter fan motor
The speed of the fan motor was increased by 45% and the silence of 35 dB was reached.
● Working at extremely low temperature
The inverter compressor can run stably at extremely low temperatures.
● Adaptive thermostat technology of ±1℃
The user feels more comfortable with small temperature fluctuations.
The basic principle of heat pump water heater: It mainly consists of compressor, heat exchanger, axial fan, heat storage water tank, water pump, liquid storage, filter, electronic expansion valve and electronic automatic control. After switching on the power supply, the axial fan starts running, the outside air flows through the evaporator for heat exchange, and the reduced temperature air is expelled from the system by the fan. A kind of low pressure working medium gas is compressed into high temperature and high pressure gas and fed to the capacitor. The water forcibly circulated by the water pump also passes through the condenser and is heated by the working medium and fed to the consumer for use. The working medium is cooled to a liquid and the liquid expands. After the valve is throttled and cooled, it flows back into the evaporator. This cycle works repeatedly, and the heat energy in the air is continuously "pumped" into the water, so that the water temperature in the water tank for heat preservation gradually rises and finally reaches about 55°C, which is just suitable for people to take a bath.
Heat pump water heaters are a new thing on the market, and consumer awareness of this is still very low. There are many people who think that it is impossible to get three parts heat with one part heat, and the same applies to other products related to the application of heat recovery technology, although the popularity of heat pump air conditioners was very high.
People's understanding is limited only to the fact that air conditioning is a large electricity consumer, but they do not know that it is more energy-saving than the coal-fired ball furnace. As some larger shopping malls have not yet sold air-powered water heaters, consumer awareness of air-powered water heaters is still very low.
In order to meet these growing requirements, Guangdong JNOD New Energy Technology Co., LTD. has various heat pump water heaters, which allow to increase the products and make them more effective, reliable and consistent.
Swimming Pool Heat Pump is used to maintain the temperature of swimming pool water. Swimming Pool Heat Pump, because the indoor swimming pool generally maintains the water temperature at 26℃~28℃ and the air temperature at 28℃~30℃ (the air temperature is 1℃~2℃ higher than the water temperature).
What is the reason for the continued popularity of the Swimming Pool Heat Pump?
Why is Swimming Pool Heat Pump in demand?
What metrics should be considered for Swimming Pool Heat Pump?
Not only swimming pools, but also from hotels to fitness clubs, heated swimming pools are becoming more and more indispensable, and the power consumption of constant temperature heating equipment has become one of the power consumption concerns of swimming pool owners, and its operating cost should not be underestimated.
Faced with the phenomenon that the market is in short supply, for many swimming pool owners who are eager to generate income, how to improve the energy efficiency utilization rate of the swimming pool constant temperature heat pump, ensure the efficient operation of the swimming pool in the low temperature climate, extend the popularity to the four seasons, and realize the full swimming pool. Annual business has become a key upgrade direction.
Since the water temperature of indoor swimming pools is generally kept at 26°C~28°C, and the air temperature is kept at 28°C~30°C (the air temperature is 1°C~2°C higher than the water temperature), for lighting needs, the walls are mostly glass walls or glass structures. Because the pool water contains a lot of chlorine, with the continuous evaporation of the water in the pool, the air humidity is high, and the humid air causes a lot of condensation on the walls or glass, which is bound to cause strong corrosion to the interior decoration of the building. In addition, because humid air contains a large number of viruses, bacteria and other elements that reduce air quality, it can make it difficult for people to breathe, so indoor swimming pool temperature and humidity control are getting more and more attention. Swimming Pool Heat Pump has also attracted the attention of consumers.
Swimming Pool Heat Pump considers indoor air quality, and the constant temperature heat removal pump unit is equipped with fresh air treatment function and exhaust air function.
Swimming Pool Heat Pump considers the operating cost of the constant temperature heat removal pump unit. In the spring and autumn, a large amount of outdoor low-humidity fresh air can be used to adjust the humidity of the indoor air to reduce the operating cost.
In order to prevent the circulating air from affecting the service life of the equipment, the key components and sheet metal structure of the Swimming Pool Heat Pump are treated with anti-corrosion during the manufacturing process, and the compressor, power distribution cabinet and control system are isolated from the wind system.
After reading, do you have a deeper understanding of Swimming Pool Heat Pump? For further information, please contact Guangdong JNOD New Energy Technology Co., LTD.
The Swimming Pool Heat Pump unit dehumidifies the indoor air while keeping the indoor air at a constant temperature. In order to save energy, the air heat is fully recycled during the operation of the equipment, and the recovered heat is used to heat the pool air or pool water through the regeneration system to ensure that the indoor air is at a constant temperature. The condensed water produced by de-temperature can be directly discharged outdoors or recycled into the swimming pool to supplement the pool water.
What are the components of Swimming Pool Heat Pump?
What are the areas of use of the Swimming Pool Heat Pump?
What are the precautions for the use of Swimming Pool Heat Pump?
1. The product composition of Swimming Pool Heat Pump:
Rack, heat exchanger, compressor, fan, pool water heat pump heating water cooling condenser, energy regulating valve, solenoid valve, power distribution cabinet, operation control system, etc.
2. Product configuration of Swimming Pool Heat Pump:
(1) Compressor: Copeland hermetic scroll compressor
(2) Heat exchanger: high-efficiency anti-corrosion copper tube sleeve coated aluminum fin or copper tube copper sheet
(3) Pool water heat pump auxiliary heating condenser: copper-titanium alloy material
(4) Energy regulating valve of refrigeration system: American Sporlan or Danfoss
(5) Fan: Sino-German joint venture fan, horizontal structure adopts Siemens or ABB motor with inner rotor pulley
(6) Main electrical appliances: Siemens components, the operation control system adopts Siemens touch screen PLC with communication interface and firefighting linkage.
Swimming Pool Heat Pump offers residential and commercial pool heaters, portable mini pool heat pumps and thermal water heating. It is an efficient, economical and green way to use environmentally friendly refrigerants R32 and R410A and titanium heat exchangers to heat the pool water. If you are looking for an energy-efficient and cost-effective way to heat your pool, we would undoubtedly recommend our Air Source Pool Heat Pump.
1. Do not use or store gasoline or other flammable and explosive gases and liquids next to the Swimming Pool Heat Pump, otherwise it will cause danger. Do not use the main power switch to turn the pool heat pump on or off, provide an operable switch.
2. Do not stuff anything into the air outlet of the Swimming Pool Heat Pump, it is very dangerous. The fan runs at high speed and may cause personal injury.
3. The ambient temperature of Swimming Pool Heat Pump is -10~38℃, and the water pressure is 0.20~0.6Mpa. If the heat pump is used in an environment other than the above conditions, it may cause the heat pump function to fail. At this time, the installation site needs to be changed.
The demand for Swimming Pool Heat Pump is also growing. Guangdong JNOD New Energy Technology Co., LTD. has been committed to providing customers with the best quality Swimming Pool Heat Pump for many years.
Swimming Pool heat pumps are one of the most cost efficient heating options on the market. The start-up costs can be somewhat expensive but they are highly energy efficient while offering advanced heating technology. Swimming Pool heat pumps pay for themselves after just a couple of seasons via the savings you'll see on your utility bills.
Swimming Pool Heat Pump Benefits
Reliable and durable heat pumps require fewer repairs than gas heaters.
No emissions and low electrical use make heat pumps the eco-friendly pool heater.
Heats for much lower costs, costing 50-75% less than gas heaters to operate.
How Swimming Pool Heat Pumps Work:Swimming Pool heat pumps leverage a combination of air and electricity to heat your pool water. They use electricity to power a fan and a small compressor, to absorb surrounding air heat and transfer it into your pool’s water. Pool heat pumps require very little electricity to run.
Swimming Pool Heat Pump Installation: Heat pumps can be purchased, placed level and plumbed after the filter by any handy homeowner, but we recommend an electrician to come in for the power hook-up.
Swimming Pool Heat Pump Operation Cost: The cost to operate a heat pump depends on many factors such as size of Swimming pool, size of heat pump and the outside air temperature. When the air temperatures are colder, the fan and compressor must run longer to maintain temperature, but during warmer periods the heat pump may need to run only an hour per day to maintain water temperature.
For the swimming pool heat pump, we have both R32 and R410A model. The heating capacity can be made from 3KW to 97.5KW. ON/OFF and inverter model,residetial and commercial are available. It’s with 4 ways valve,provide both heating and cooling mode to create more possibility for pool enjoyment.
If you want to know more information, please feel free to contact us.
The heat pump water heater is almost the same as the cooling principle. A good heat pump system design can utilize the cold and hot ends of the refrigeration system at the same time, that is, in hot summer, the indoor is refrigerating, while the outdoor condenser is heating hot water.
What is the purpose of the heat pump water heater?
What are the performance advantages of heat pump water heaters?
What should be paid attention to in the installation of heat pump water heater?
heat pump water heater integrates various functions such as hot water supply, heating, dehumidification, cooling, and air filtration:
No matter the weather, rain or snow all year round, the eat pump water heater automatically provides hot water 24 hours a day without interruption;
eat pump water heater High-efficiency dehumidification, the maximum dehumidification capacity is 6~8 kg in 24 hours a day, and the effect is obvious in rainy and rainy weather;
eat pump water heater filters indoor air, and the effect is more obvious when installed in the kitchen.
eat pump water heater With additional heating accessories, it can heat up the room by more than 5°C in winter, making learning, entertainment and sleeping more comfortable. No matter it is cloudy, sunny, day or night, as long as there is air, hot water can be produced. At room temperature, 180L of hot water can be produced per hour.
1. It is safe enough, water and electricity are separated, no danger, it is heated by the heat of air, and it is highly technological. Other water heaters have certain risks. heat pump water heaters are completely safe, protecting the lives of family members and providing comfortable hot water.
2. Economical enough, heat pump water heater is used in winter, about 1~1.5 kWh of electricity a day, enough for a family of 4~5 people, generally 4~5 people, at least 3~4 kWh of electricity a day.
3. Enough to enjoy, the heat pump water heater can have 24 hours of comfortable hot water, and it is a 24-hour constant temperature, which can be used immediately after opening, saving a lot of time for boiling water and avoiding accidents.
4. It is fashionable enough. The exterior of the heat pump water heater is very good-looking. At first glance, it makes people feel high-end and fashionable.
5. It is convenient enough, the heat pump water heater can be operated by iphone to control the temperature, or it can be controlled by the touch screen of the machine, which is convenient and fast.
6. Comfortable enough, the heat pump water heater has the function of air-conditioning in the kitchen, which solves the problem of hotness in the kitchen and enjoys the sense of accomplishment when cooking.
With drainage facilities:
When installing the heat pump water heater, condensed water will be discharged during use, so the installation location must have drainage facilities such as floor drains and gutters.
Instrument installation location:
The instrument, that is, the control panel, needs to be installed nearby to avoid rain; since most of the operation modes choose "economy mode", the control panel is rarely operated, and it is not necessary to install it in a very conspicuous position. Install.
Water pipe arrangement:
The inlet and outlet pipes of the heat pump water heater are preferably 25PPR pipes.
JNOD insisted on developing with technology innovation, it possessed of several national famous technicians and had invented multiply product patents. The company has been strictly implement the ISO international quality management system, and the products are of reliable guaranteed quality.
Heating and cooling heat pump is a device that transfers thermal energy from a low temperature heat source to a high temperature heat source. for cooling and heating. The low-temperature heat sources usually used in heat pump installations are the media around us - air, river water, sea water, urban sewage, surface water, groundwater, reclaimed water, fire pools, or the working fluid discharged from industrial production equipment, these working fluids Often has a similar temperature to the surrounding medium.
How does the heating and cooling heat pump work?
Compared with ordinary central air conditioning refrigeration and gas wall-hung boiler heating, why does heating and cooling heat pump feel better?
What are the installation precautions for heating and cooling heat pump?
Water flows from high to low, and heat is transferred from high-temperature objects to low-temperature objects, which is a natural law. However, in real life, for the needs of agricultural irrigation, domestic water, etc., people use water pumps to send water from low places to high places. Similarly, in today's increasingly tense energy environment, in order to recover the heat in the low-temperature hot gas usually discharged into the atmosphere, the low-temperature hot water discharged into the river, etc., the heating and cooling heat pump is used to transfer the heat energy from the low-temperature objects to the high-temperature objects. Then the high temperature object is used to heat water or heating, so that the heat can be fully utilized. The working principle of the heat pump system is consistent with the working principle of the refrigeration system.
Heating and cooling heat pump has an additional heat exchange procedure in the cycle process, and the temperature difference of the system heat exchange is smaller (the air temperature of the fan coil unit in summer is 15℃-20℃, and the air temperature of the fan coil unit in winter is about 32℃) , the wind blowing out is softer, it will not take too much moisture, and the comfort is much better.
The installation location of the heating and cooling heat pump is a problem. Many people look at the installation example and think that the heat pump host with a water tank takes up too much space. The installation of the elevator apartment has to occupy a large living balcony or kitchen space. In fact, the air energy heat pump is also related to the power Related, the equipment of a large apartment is very large, and the equipment of a small apartment will be very small, and it can even be installed on an ordinary central air-conditioning unit.
Guangdong JNOD New Energy Technology Co., LTD. can provide product certification requirements for local markets; provide catalogs, technical manuals; co-exhibit with the clients in leading industry exhibitions; do promotion on the local market's media by our news release resources.
With the continuous improvement of social and economic level, my country's air energy industry has ushered in a period of rapid development, and the scope of application of Swimming Pool Heat Pump products is also expanding. With the advantages of safety, energy saving and constant temperature, Swimming Pool Heat Pump has gradually become a better choice for swimming pools, gymnasiums, bathing centers and other places to solve the problem of constant temperature heating.
How does the Swimming Pool Heat Pump work?
What are the features of Swimming Pool Heat Pump?
Why choose the right Swimming Pool Heat Pump?
How does the Swimming Pool Heat Pump work?
Swimming Pool Heat Pump is a new type of high-efficiency energy-saving constant temperature heating equipment. It is a device that uses a small amount of electricity to drive heat from a low-temperature heat source to a high-temperature heat source based on the basic principle of reversed Carnot cycle. During operation, 1 part of energy is consumed, and 4 parts of energy (heat) are absorbed and transferred from the ambient air to the water, which saves 3/4 of the electricity compared to the water heater.
What are the features of Swimming Pool Heat Pump?
1. Swimming Pool Heat Pump, using advanced titanium alloy heat exchanger, has strong internal corrosion and can resist the erosion of chloride ions in water.
2. Swimming Pool Heat Pump is flexible in design and easy to install: integral design, beautiful and compact unit, small installation area.
3. The Swimming Pool Heat Pump project is easy to install, and the operation and maintenance costs are low.
4. The energy efficiency ratio of Swimming Pool Heat Pump is as high as 5.0, leading the industry.
5. Swimming Pool Heat Pump, using international environmentally friendly refrigerants (R410A/R417A), energy saving and environmental protection, no pollution to the environment.
6.Swimming Pool Heat Pump, super quiet, provide comfortable temperature.
Why choose the right Swimming Pool Heat Pump?
From "heating is too slow", "heating can't keep up with heat dissipation, the constant temperature feeling is useless", and even "the equipment uses electricity and does not dare to open it often", these problems may be caused by the wrong selection of Swimming Pool Heat Pumps. Therefore, when choosing a suitable Swimming Pool Heat Pump for a swimming pool, we must scientifically evaluate the required heating capacity of the swimming pool in the two stages of initial heating and constant temperature, and choose the one with greater demand as the basis for matching selection.
Under normal circumstances, the heating amount in the initial heating stage of the swimming pool will be higher than that in the constant temperature stage. Therefore, the first step in the selection of Swimming Pool Heat Pump is to understand the heating capacity required for the initial heating of the swimming pool.
JNOD has a complete heat pump industry chain, and its products involve Swimming Pool Heat Pump, House Heating & Cooling Heat Pump, Domestic Hot Water Heat Pump, Heat Pump Dehumidifier, Commercial & Industrial High Temperature Water Heating Solution, Industrial and Agricultural Heat Pump Dryer, etc.
Water heating accounts for around 18% of the average home’s energy use. Switching to an energy-efficient heat pump water heater can make a difference on your utility bill and is an essential step in lowering the carbon footprint of your home.
We believe we JNOD are a very good heat pump supplier for you as following reason.
1. Complete Product Range:
JNOD has complete air to water heat pump product ranges, including heat pump water heaters, heating&cooling heat pump and swimming pool heat pump. We can satisfy most residential hot water and space heating need for apartment or single house.
2. Certification
Our All in one heat pump water heater gains the latest CE certificate and A+ ERP label. For some countries, distributor or install company can use them to apply the subsidies from government.
3. Multi-function
Regard to all in one hot water heat pump:
- If you look for hybrid hot water heat pump, choose the all in one heat pump. It’s a kind of electric + air source heat pump as there is an auxiliary electric heating inside as a backup.
- If there is a solar system, wires can directly connect to inverter, which can provide the electricity needed by heat pump, and then the need of grid can be reduced.
- If you want remote control, options like WiFi and RS485 can be provided.
4. OEM/ODM
If you have need of OEM/ODM, welcome to inquire us with the logo and design file you want, we will try our best to help you with better selling.
Heat pump water heatersare "heat transfer" devices that use the principle of refrigeration to absorb heat from the air to heat water. A refrigerant with a boiling point of more than minus 10°C is passed into the exchanger, and the refrigerant absorbs heat from the air by evaporating from liquid to gas.
What is the safety of the use of heat pump water heaters?
What is the output of the heat pump water heater?
Where is the convenience of heat pump water heater?
The heat pump water heater does not require sunlight, so it can be placed at home or outdoors. After the water stored in the solar water heater is used up, it is difficult to produce hot water immediately. If the electric heating takes a long time, as long as there is air and the temperature is above minus 20 degrees Celsius, the heat pump water heater can be under pressure 24 hours a day. run. In this way, even if one tank of water is used up, the air source water heater will produce another tank of hot water in about an hour or even less time. At the same time, the heat pump water heater can also fundamentally eliminate the safety hazards such as electric water heater leakage, dry burning and harmful gas generated when the gas water heater is used.
The water output is large. The water tank capacity of the heat pump water heater is between 150L-760L. Users can choose the corresponding capacity of the air energy water heater according to the needs of the family. Water, bath water, etc., truly realize the central hot water for the whole family and improve the quality of life of users. But be aware that heating at extremely low temperatures with a heat pump water heater is more difficult and may waste electricity, and the water tank needs to take up the heating space.
Long life
The life of heat pump water heater is generally 10 years (here for reference), which is longer than 6 years for gas water heaters and 8 years for electric water heaters. The advantages of air source water heater life can reduce the frequency of replacement water heaters, the trouble of installation, and save a lot of money.
Central hot water
Consumers often need hot water in their daily lives, but without hot water sources, they usually boil a pot of water for use. The heat pump water heater has a central hot water function. It stores the heated water in the heat preservation water tank, and there is a comfortable and constant temperature hot water as long as you press the tap. The hot water of the air energy water heater can be used in the whole family, fully meeting the domestic hot water demand of consumers.
Guangdong JNOD New Energy Technology Co., LTD. has focused on the field of heat pump water heaters for many years, it has attracted a large number of consumers around the world with its high-quality products, appropriate prices, and excellent services.