Install Swimming Pool Heat Pump For Hotels- China Factory Suppliers Manufacturers

The heat pump water heaterabsorbs the low-temperature heat in the air, vaporizes the cold medium, and then compresses it through the compressor to increase the temperature, and then converts it through the heat exchanger to heat the water, and the compressed high-temperature heat energy is used to heat the water temperature.

What is the difference between a heat pump water heater and an air conditioner?

What are the advantages of heat pump water heater and compared with gas water heater?

What are the advantages of heat pump water heater compared to electric water heater?

What is the difference between a heat pump water heater and an air conditioner?

When a general air conditioner is refrigerating, it absorbs the heat in the room through the phase change of the refrigerant in the evaporator (liquid to gas), and then realizes cooling through the heat release of the outdoor condenser. His heat exchange equipment is mainly finned heat exchangers. The heat pump water heater converts the low-grade energy in the air into high-grade energy that we can use. The heat is obtained by absorbing heat from the air through the phase change (endothermic) of the refrigerant in the evaporator, and then releasing heat through the indoor condenser (or jacket heat exchanger). This is his heating state. Its cooling is the same as that of general air conditioners, except that the heat exchanger may be different. General air conditioners use ordinary finned heat exchangers.

What are the advantages of heat pump water heater and compared with gas water heater?

Gas water heaters heat the water temperature by burning combustible gas, and at the same time, will produce greenhouse gases such as carbon dioxide. If the continuous large amount of carbon dioxide on the earth exists in the air for a long time, it will produce a greenhouse effect on the earth's environment! The heat pump water heater only heats the water temperature with the heat in the air, and will not emit any toxic and harmful gases. In the era of energy saving and emission reduction, it is a water heater that is truly energy-saving and environmentally friendly. Secondly, gas water heaters may leak gas and cause human carbon monoxide poisoning accidents. Therefore, the safety of empty heat pump water heater is better than that of gas water heater.

What are the advantages of heat pump water heater compared to electric water heater?

We can compare heat pump water heater with electric water heater. Electric water heaters are heated with electric heating rods. The heat pump water heater heats the water temperature by absorbing heat from the air. The heat generated by the heat pump water heater consumes 1 kWh of electricity equivalent to the heat generated by the electric water heater consuming 4 kWh of electricity. In terms of energy saving, heat pump water heaters are far more energy efficient than electric water heaters. Second, in terms of security. The heat pump water heater just transfers the heat after compression heating to the water tank for heating, so the water and electricity are completely isolated. The electric water heater electric heating rod is directly heated in the water. Therefore, leakage accidents are easy to occur!

Guangdong JNOD New Energy Technology Co., LTD. is committed to providing customers the best hot water & heating solutions with our heat pump products, focusing on the latest technologies, strive for outstanding quality in our products and customer service.

In this era of carbon neutrality and carbon peak, people began to understand the concept of environmental protection and began to implement environmental protection policies, such as the use of environmentally friendly and energy-saving products in life, etc. Even the swimming pool water treatment industry has paid more attention to the environmental protection and energy-saving performance of Swimming Pool Heat Pump.

What are the structural features of the Swimming Pool Heat Pump?

Why is Swimming Pool Heat Pump a cost-effective choice?

Why do Swimming Pool Heat Pumps need an anti-condensation system?

What are the structural features of the Swimming Pool Heat Pump?

1. In line with environmentally sustainable development strategy

Swimming Pool Heat Pump adopts environmentally friendly R407C refrigerant fluorine-free system, which saves energy and reduces emissions, and uses free green energy without pollution.

2. Plasma sterilization, 360 purify air

The Swimming Pool Heat Pump can choose the original plasma sterilization and purification technology, which actively generates a large number of active hydroxide ions, surrounds and adsorbs the bacteria and destroys the protein structure on the surface of the bacteria, so as to achieve the effect of sterilization and purification.

Why is Swimming Pool Heat Pump a cost-effective choice?

Box structure of Swimming Pool Heat Pump, independent and beautiful

The panel is made of GI galvanized steel material, embedded with polyurethane (PU) fire-proof, sound-insulating and heat-insulating material, and the inside and outside are sprayed with anti-corrosion spray; , The refrigerant compression system accessories are separated from the air duct system of the heat pump independently to avoid corrosion by ammonia-containing air, ensure a longer service life of the heat pump, and facilitate disassembly and maintenance.

Swimming Pool Heat Pump has multiple system protection

①Pressure protection: high pressure protection, low pressure protection, water filling protection;

②Temperature protection: Excessive exhaust temperature protection, compressor overcut protection, hot water temperature protection

③ Power protection: lack/reverse phase protection, compressor overload protection.

Why do Swimming Pool Heat Pumps need an anti-condensation system?

① The anti-condensation sensor of Swimming Pool Heat Pump can avoid condensation and condensation on the inner surface of indoor glass windows and walls. When the temperature at the indoor anti-condensation dew point is too low, the anti-condensation sensor installed in the place will fed back the information to the unit control system so that the unit can re-adjust the indoor relative humidity, so that the temperature here is higher than the dew point temperature to prevent condensation.

② If there are parts that are particularly prone to condensation and condensation in the swimming pool space, the Swimming Pool Heat Pump can be equipped with a special anti-condensation and condensation system to ensure that the temperature of the condensation-prone parts of the swimming pool is above the dew point temperature.

JNOD has a complete heat pump industry chain, and its products involve Swimming Pool Heat Pump, House Heating & Cooling Heat Pump, Domestic Hot Water Heat Pump, Heat Pump Dehumidifier, Commercial & Industrial High Temperature Water Heating Solution, Industrial and Agricultural Heat Pump Dryer, etc. The ultra-low temperature EVI heat pump has been widely used, too.

To celebrate 13th Anniversary of JNOD, we organized all of our staff to take a two-day-one-night travel to XiaChuan Island. Our staff,dressed up in customized dark blue clothes, departing with good spirit. We played games, sang songs on the bus. Three hours later after taking bus and boat, we arrived at the scenic spot.

The island has charming scenery. There are natural beaches with excellent sand quality, beautiful islands and bays, strange mountain scenery and stone forests, attractive scenic spots, dense primary secondary forests, animal and plant wonders and a complete variety of seafood treasures.

We have been serving our customers with spirit of hard working and good service for first 13 years. We wish JNOD will be even better and more prosperous in the next 10 years, 20 years and even more!

How time flies, the first quarter of 2022 will soon pass. Do you have any new plans for your business? JNOD has developed some new creative products including electric boiler, heat pump and water heaters. In order to thank new and old customers, we will hold an Alibaba online live stream show on March 11, from 8:00-10:00 pm Beijing time. Big discount and promotions are available during the show time. Welcome to join us.

Here's the link to watch our show：

https://www.alibaba.com/live/promotions-for-newly-developed-boiler-and_139230dd-0e7d-4ea5-8f6a-e91d94aa08fa.html?referrer=SellerCopy

Swimming Pool Heat Pump is equipped with high-quality brand scroll compressors, with stable operation, low vibration, low noise, and low failure rate; key components such as thermal expansion valves, electronic appliances, etc. are well-known brand components with reliable performance.

How to choose a truly eco-friendly Swimming Pool Heat Pump?

What is the function of the Swimming Pool Heat Pump damping system?

Why choose an energy-efficient Swimming Pool Heat Pump?

How to choose a truly eco-friendly Swimming Pool Heat Pump?

The initial heating determines the model selection. The real energy saving stage of the Swimming Pool Heat Pump depends on the "constant temperature" period.

Select frequency conversion, more energy saving, the key to Swimming Pool Heat Pump lies in the operation logic of frequency conversion technology. In the constant temperature stage, the frequency conversion technology can enable the equipment to operate intelligently at a low frequency and match the real-time heating demand. There is no need to continuously heat the pool water by repeatedly starting and stopping like a fixed-frequency heat pump, so as to achieve the purpose of energy saving. We can compare the energy saving performance of fixed frequency heat pump and variable frequency heat pump under the same conditions.

Due to the difference in temperature, the heating efficiency of the heat pump will also be different. To compare the energy-saving effect in the constant temperature stage, we chose a fixed-frequency heat pump with the same heating level as the variable-frequency heat pump (IPHC150T) selected in the previous step at an air temperature of 26 °C (26 °C is generally used as the test temperature in the laboratory). Frequency selection is 60kw.

What is the function of the Swimming Pool Heat Pump damping system?

① The independent suspension shock absorption system makes the fan and motor run more quietly and reduces the noise caused by air disturbance.

② An integral base carries the fan and the motor, and according to the load-bearing distribution of each part, different types and quantities of shock absorbers are correspondingly configured to avoid jumping, anti-vibration and resonance, and make the operation of the fan and the motor more stable.

③ The fan and the box are isolated by flexible connection to avoid vibration transmission.

Why choose an energy-efficient Swimming Pool Heat Pump?

Considering indoor air quality, Swimming Pool Heat Pump is equipped with fresh air treatment function and exhaust function.

Considering the operating cost of the constant temperature heat removal pump unit, the Swimming Pool Heat Pump can use a large amount of outdoor low-humidity fresh air to adjust the humidity of the indoor air in spring and autumn, reducing operating costs.

In order to prevent the circulating air from affecting the service life of the Swimming Pool Heat Pump, the key components and sheet metal structure of the equipment are treated with anti-corrosion during the manufacturing process, and the compressor, power distribution cabinet and control system are isolated from the wind system.

Guangdong JNOD New Energy Technology Co., LTD. is committed to providing customers the best hot water & heating solutions with our heat pump products, focusing on the latest technologies, strive for outstanding quality in our products and customer service.

A heat pump is part of a heating and cooling system. Like an air conditioner, it can cool your home, but it’s also capable of providing heat. In cooler months, a heat pump pulls heat from the cold outdoor air and transfers it indoors, and in warmer months, it pulls heat out of indoor air to cool your home. They are powered by electricity and transfer heat using refrigerant to provide comfort all year round. Because they handle both cooling and heating, homeowners may not need to install separate systems to heat their homes. In colder climates, an electric heat strip can be added to the indoor fan coil for additional capabilities. Heat pumps do not burn fossil fuel like furnaces do, making them more environmentally friendly.

HOW A HEAT PUMP WORKS

A.COOLING MODE

One of the most important things to understand about heat pump operation and the process of transferring heat is that heat energy naturally wants to move to areas with lower temperatures and less pressure. Heat pumps rely on this physical property, putting heat in contact with cooler, lower pressure environments so that the heat can naturally transfer. This is how a heat pump works.

B.HEATING MODE

A Heat pump in heating mode operates just like cooling mode, except that the flow of refrigerant is reversed by the aptly named reversing valve. The flow reversal means that the heating source becomes the outside air (even when outdoor temperatures are low) and the heat energy is released inside the home. The outside coil now has the function of an evaporator, and the indoor coil now has the role of the condenser.

The physics of the process are the same. Heat energy is absorbed in the outdoor unit by cool liquid refrigerant, turning it into cold gas. Pressure is then applied to the cold gas, turning it to hot gas. The hot gas is cooled in the indoor unit by passing air, heating the air and condensing the the gas to warm liquid. The warm liquid is relieved of pressure as it enters the outdoor unit, turning it to cool liquid and renewing the cycle.

Now, more and more families are making the preparation for the Winter, Like installing the heat pump for house heating and hot water.

No hesitate to contact us for OEM/ODM cooperation and development.

The heating and cooling heat pump is a highly efficient, energy-saving device that makes full use of inferior thermal energy. Heat can be transferred spontaneously from a hot object to a cold object, but not spontaneously in the opposite direction.

How does the heating and cooling heat pump work?

What does the operating time of the heating and cooling heat pump have to do?

What is the function of the heating and cooling heat pump?

How does the heating and cooling heat pump work?

In the heating and cooling circuit of the heat pump, the heat Q0kcal/h is obtained from the low temperature heat source (outside air or circulating water whose temperature is higher than the evaporation temperature t0) and the mechanical work ALkcal/h is consumed, while the heat of Q0kcal/h is obtained from the low temperature heat source (outside air or circulating water whose temperature is higher than the evaporation temperature t0) and the mechanical work ALkcal/h is consumed. The heating system) provides the heat of Q1kcal/h, and the relationship between these heats corresponds to the first main law of thermodynamics, ie Q1=Q0+ALkcal/h

If the heating and cooling heat pump is not used and the heat is converted by mechanical work (or the high temperature heat source is heated directly by electrical energy, the heat obtained is ALkcal/h, and after the heat pump device is used, the high temperature heat source (heating system) receives more heat is obtained: Q1-AL=Q0, kcal/h This heat is obtained from a low temperature heat source, and this heat cannot be obtained without a heat pump device. Therefore, using a heat pump device can save fuel and use waste heat.

What does the operating time of the heating and cooling heat pump have to do?

The working cycle of a heating and cooling heat pump is exactly the opposite of that of a thermal engine. A thermal engine uses the energy of a high-temperature heat source to generate mechanical work, while a heat pump transfers heat from a low-temperature heat source to a high-temperature object by consuming mechanical work.

If the heat pump and the heat engine have two identical heat source temperatures, the thermal efficiency of the heat engine cycle is η=AL/Q1; the energy index of the thermal engine cycle – the heat conversion coefficient φ=Q1/AL, i.e. φ=1/η. The value of η is always less than 1, so the value of φ is greater than 1.

If the refrigerator and the heat pump have two identical heat source temperatures, the relationship between them is φ=Q1/AL=(Q0+AL)/AL=e+1, where η is the refrigerator's cooling coefficient. It can be seen that the minimum value of the heat transfer coefficient φ η1 and in this limit case Q0 E0, that is, no heat is absorbed from the low temperature heat source.

What is the function of the heating and cooling heat pump?

Green simultaneous universal heat pump for heating and cooling

We offer not only advanced, energy-efficient heat pumps with advanced inverter technology, but also a complete solution for heating, cooling and hot water supply of residential buildings.

WiFi remote control

The heating and cooling heat pump can be controlled via Wi-Fi, allowing users to operate their heat pumps anytime, anywhere.

Three in one function mode

Hot water (DHW) + Heating and cooling.

Guangdong JNOD New Energy Technology Co., LTD. Focus on research and development of heat pumps and electric boilers, manufacturing and providing comprehensive energy saving solutions.

March 4^th Alibaba Show For Electric Boiler And Heat Pump

Hello everyone, After a pleasant Chinese New Year holiday, we are very happy to meet you again in Alibaba's live broadcast room at 20:00 on March 4th .This time we will show you our latest electric boiler and heat pump products.

Highly welcome everyone to join and interact with us. You may get the latest market info sharing from it. Looking forward to cooperate with you.

A big discount and free sample will be offered during the show. We are waiting you.

Here's the link to watch our show：

https://www.alibaba.com/live/jnod-new-energy-technology-central-heating_79c95335-de87-4ff0-82e5-c4dcb95bdf44.html?referrer=SellerCopy

Heat

2009-6-1 · Heat pumps transfer heat from one space to another using a compressor and refrigeration circuit. For heat pump water heaters this is the transfer of heat from the environment into the water. They operate in reverse to …

Allied? heat pumps can provide both heating and cooling, making them a smart choice for every season. Pairing a heat pump with a gas furnace creates a dual-fuel system that can maximize efficiency by alternating between two different fuels. To select the right heat pump, compare efficiency ratings and compressor types. 4.1 7 Reviews 4HP18V

2022-11-22 · With the largest range of compact heat pumps available in Australia, 150L, 200L, 270L, 340L. GMO has a solution for your home or commercial project. Our extensive range of products can service single bedroom/bathroom residencens, right through to multi-level offices, hotels, motels, resorts, receational facilities, retail outlets.

Our inventory of heat pumps includes 230- and 460-volt units ranging from 3 to 10 tons. 10 Items Sort By Daikin 3 Ton 14 SEER Heat Pump Condensing Unit - 208/230V Three Phase Model: DZ14SA0363

2021-11-3 · Designed for year-round comfort, a heat pump keeps you cool by drawing heat from your home on warm days and drawing heat from the outside air to keep you warm on cool days. For families seeking a versatile heating and cooling …

SHP- 60P PowerSmart Heat Pump

Hydro-Pro ABS Swimming Pool Heat Pump (P8/32) 8.3kW