











Air heat pump water heater has low energy consumption (power consumption saves more than 2/3 compared to conventional electric water heaters), high thermal efficiency (heating speed is four times higher than conventional electric water heaters), Environmental protection and energy saving (reduces more than 2/3 compared to conventional electric water heaters) carbon dioxide emissions).
What are the differences between heat pump water heaters and air conditioners?
Why do heat pump water heaters improve the consumer experience?
What is the working process of the heat pump water heater?
The operating mode of the heat pump water heater is very different from that of the air conditioner, which determines the difference in the design concept between the heat pump compressor and the air conditioner compressor. Trouble-free, long-term stable operation of heat pump water heaters Compared to air conditioning systems, there is a big difference in the operating time. The operating time of heat pump water heater systems is much longer than that of air conditioning systems. The operating time of a heat pump water heater depends on the following factors: Air conditioning systems are often used in summer, but water heaters are mass-produced and run particularly long in winter. The time for heating a water tank in winter is several times as long as in summer, so it is necessary to confirm the operating mode of the heat pump water heater in winter.
According to statistical calculations, 2/3 of the service life of the heat pump water heater is consumed in winter. Since the water outlet temperature of the heat pump is over 55°C, the temperature of the water tank decreases when using. The liquefaction temperature is the main factor affecting the service life of the compressor. Under the condition of simultaneous operation, the total load of the compressor in the heat pump water heater is much higher than that of the compressor in the air conditioning system. The main motivation for consumers to buy water heaters with heat pump is energy saving and comfort. Consumers will thus consume more water, which also extends the working time of the heat pump. If the heat pump water heater is used for heating and service water applications, it can run for a long time during the heating period. From the combination of the above factors, it is evident that the main motor of the heat pump water heater will develop in the direction of miniaturization, and the actual operating time will be greatly extended.
A water heater with compression heat pump mainly consists of evaporator, compressor, condenser and expansion valve. Thermal Circular Process Throttling → Re-evaporation, whereby heat from the environment is transferred to the water.
Guangdong JNOD New Power Technology Co., LTD. sales team has extensive experience in overseas markets. We provide sincere and professional services, including OEM/ODM/project services, technology support, market analysis, use of design and assembly of installation. We have provided marketing consulting services and business solutions to customers from over 40 countries.
When the indoor swimming pool is used in winter, it is necessary to heat the pool water to make the water temperature reach 26-28 degrees, which requires a lot of thermal energy. Boilers, gas, and electricity are gradually eliminated due to their low thermal efficiency and environmental protection. More and more people will Option to use Swimming Pool Heat Pump. So in addition to environmental protection, what are the benefits of Swimming Pool Heat Pump?
Compared with traditional boilers, what are the advantages of Swimming Pool Heat Pump?
What advancements have the Swimming Pool Heat Pump made?
Why is the demand for Swimming Pool Heat Pump increasing?
Compared with traditional boilers, Swimming Pool Heat Pump does not use any fuel such as coal, oil, gas, etc., and does not produce open flames and exhaust emissions. Therefore, the use of air source heat pumps not only protects the atmospheric environment, but also eliminates fire, explosion, poisoning, etc. Accident happens. Compared with ordinary electric water heaters, it consumes less power, avoids leakage accidents, saves energy and is environmentally friendly. Compared with solar water heaters, air energy heat pumps are not affected by weather, geography, climate and other factors when working Sunny can be used normally.
smart system
① The unit control system adopts intelligent control. When customers use it, they only need to set the air temperature, humidity, and pool water temperature, and then the equipment will enter the fully automatic operation state, and there is no need for special personnel to take care of it.
② Customers can learn air temperature, humidity and other data through the touch-type full-color screen. Real-time value of pool water temperature and operating status of equipment.
③ Customers can also choose a communication interface according to their needs to implement remote control, monitoring and connection with the system.
ventilation system
Customers can choose the intelligent ventilation system of Swimming Pool Heat Pump. After choosing this system, the unit will control the amount of fresh air entering the room according to the concentration of carbon dioxide in the room, which can greatly save the energy consumption during operation.
Not only that, the advancement and development of sports equipment and facilities and equipment technology have also provided a foundation for more people to actively participate in fitness. Take swimming, the most popular sport, as an example. In the past, people swimming in open-air pools or public waters were easily limited by the temperature environment. If they accidentally caught a cold, it would be bad for their health, and microbial bacteria would grow in public waters. , the health situation is not optimistic. In recent years, with the advancement of Swimming Pool Heat Pump related supporting technical facilities, many swimming pools and other fitness places are equipped with heated swimming pools, and even schools, communities, villas, etc. are equipped with heated swimming pools, so that people can not only enjoy the hot summer. The fun of refreshing swimming can also have a comfortable swimming experience in the cold winter.
If you would like to receive more information about the Swimming Pool Heat Pump, please connect Guangdong JNOD New Energy Technology Co., LTD., and they will be happy to answer your question!
Heat pump water heater is a new type of water heater. It converts air energy into heat energy through a heat pump to produce hot water. This water heater solves the disadvantage that solar energy cannot be used on rainy days. In addition, this water heater is more efficient compared to gas water heaters and electric water heaters. Environmental protection when you choose this water heater is a very good choice.
What is the main reason why air heat pump water heaters are popular in the market?
What is the workflow of a heat pump water heater?
What do you know about heat pump water heaters that can be used in hotels?
Air Source Water Heater is a new type of low carbon and environmentally friendly water heater. The operating cost of heat pump water heaters is only 1/4 of the cost of electric water heaters, which is very energy-saving and efficient. Originally, as a fourth-generation air water heater, its greatest feature is safety and money-saving! The operating costs of the air water heater are only 1/4 of the electric water heater, 1/6 of the gas water heater, 1/2 of the solar water heater, 2/3 of the fuel water heater and 3/5 of the gas heating system. The device absorbs the heat in the air to heat the cold water, and the cool air released does not pollute the environment and completely eliminates the safety risks such as flammability, explosion, electric shock and gas poisoning of ordinary water heaters.
1. The compressor compresses the low pressure refrigerant flowing back and converts it into a gas with high temperature and high pressure for discharge.
2. The high temperature and high pressure refrigerant gas flows through the copper pipe wrapped around the outside of the water tank, and the heat is passed through the copper pipe into the water tank. The cooled refrigerant becomes liquid under constant pressure and enters the evaporator after passing the expansion valve.
3. As the pressure of the evaporator is suddenly reduced, the liquid refrigerant is quickly evaporated into a gaseous state and absorbs a large amount of heat.
4. At the same time, under the action of the fan, a large amount of air flows through the outer surface of the evaporator, the energy in the air is absorbed by the evaporator, the air temperature drops quickly, and cold air is released and released.
5. The refrigerant that has absorbed a certain amount of energy is then returned to the compressor and enters the next circuit.
JNOD hot water heat pumps provide a highly efficient means of heating hot water for commercial and industrial applications. An average COP of 4.2 means that the energy efficiency is more than four times higher than that of conventional water heaters. It removes heat energy from the ambient air. This means savings of 60.75% of energy costs compared to electric water heaters.
Guangdong JNOD New Energy Technology Co., LTD. Provides marketing consulting services and business solutions to customers from over 40 countries. Customized solution for hot water supply based on the customer's market demand.
Heat pump water heatersare "heat transfer" devices that use the principle of refrigeration to absorb heat from the air to heat water. A refrigerant with a boiling point of more than minus 10°C is passed into the exchanger, and the refrigerant absorbs heat from the air by evaporating from liquid to gas.
What is the safety of the use of heat pump water heaters?
What is the output of the heat pump water heater?
Where is the convenience of heat pump water heater?
The heat pump water heater does not require sunlight, so it can be placed at home or outdoors. After the water stored in the solar water heater is used up, it is difficult to produce hot water immediately. If the electric heating takes a long time, as long as there is air and the temperature is above minus 20 degrees Celsius, the heat pump water heater can be under pressure 24 hours a day. run. In this way, even if one tank of water is used up, the air source water heater will produce another tank of hot water in about an hour or even less time. At the same time, the heat pump water heater can also fundamentally eliminate the safety hazards such as electric water heater leakage, dry burning and harmful gas generated when the gas water heater is used.
The water output is large. The water tank capacity of the heat pump water heater is between 150L-760L. Users can choose the corresponding capacity of the air energy water heater according to the needs of the family. Water, bath water, etc., truly realize the central hot water for the whole family and improve the quality of life of users. But be aware that heating at extremely low temperatures with a heat pump water heater is more difficult and may waste electricity, and the water tank needs to take up the heating space.
Long life
The life of heat pump water heater is generally 10 years (here for reference), which is longer than 6 years for gas water heaters and 8 years for electric water heaters. The advantages of air source water heater life can reduce the frequency of replacement water heaters, the trouble of installation, and save a lot of money.
Central hot water
Consumers often need hot water in their daily lives, but without hot water sources, they usually boil a pot of water for use. The heat pump water heater has a central hot water function. It stores the heated water in the heat preservation water tank, and there is a comfortable and constant temperature hot water as long as you press the tap. The hot water of the air energy water heater can be used in the whole family, fully meeting the domestic hot water demand of consumers.
Guangdong JNOD New Energy Technology Co., LTD. has focused on the field of heat pump water heaters for many years, it has attracted a large number of consumers around the world with its high-quality products, appropriate prices, and excellent services.
JNOD are selling R32 inverter swimming pool heat pump, its heating capacity ranges from 5.5-32Kw. So, it will be a problem for user or wholesaler to choose the suitable heating capacity for different pool sizes. Let us show you 2 methods to choose the suitable.
If you do not want to do complicated calculations and do not take into account extreme weather, you can use the following formula: 3KW for 10m³. For example, if you want to heat a 30CBM pool, (30 CBM÷10CBM)* 3KW = 9KW . So, you can choose the 9.5Kw model.
This method is used to do a very precise calculation on the heating capacity, considering the heating time, water temperature, ambient temperature, etc.
* Step 1: Calculate the needed heating capacity
In the calculation, we usually set the outlet water temperature at 28℃, primary heating time usually is 48hours.
Formula will use: Q=1.163*△t*V ;
W=Q/T
Explanation: Q = Heat Demand (KwH)
△t = Temperature Difference (℃)
V = volume of pool (m³)
W = Heat pump capacity(Kw) - usually will add 15-25% of heat loss
T = Hours for heating (H)
Example: A swimming pool 10*4*1.5m, original temperature is 18℃
Answer: set the target temperature into 28℃, heating hour into 48 hours
Q = 1.163*(28-18)*(10*4*1.5)=697.8 KwH
W= (1+15%) *Q/T=1.15*697.8/48=16.72 KW
*Step 2 : Choose the suitable heating capacity depending on working condition
The heating capacity of a heat pump is not constant; it changes with the ambient temperature. Therefore, after calculating the required heating capacity, we also need to choose the model we need according to the ambient temperature.
Still that sample, we calculate that 16.72Kw is needed. If the ambient temperature is around 24-27℃, you can choose the 17.5Kw model; if ambient temp is around 12-15℃, better to choose 25kw model.
Model | J175P32INVP | J210SP32INVP | J250SP32INVP |
Ambient Temperature:(DB/WB)27℃/24.3℃ | |||
Heating Capacity (kW) | 4.34~18.1 | 4.72~21.21 | 5.05~25.28 |
Power Input (kW) | 0.27~2.81 | 0.29~3.26 | 0.31~3.89 |
COP | 16.1~6.4 | 16.2~6.5 | 16.2~6.5 |
Ambient Temperature:(DB/WB)15℃/12℃; | |||
Heating Capacity (kW) | 3.44~13.35 | 3.51~14.21 | 3.81~17.08 |
Power Input (kW) | 0.41~2.61 | 0.43~2.78 | 0.48~3.35 |
COP | 8.3~5.1 | 8.1~5.1 | 8~5.1 |
Hope this can help you choose suitable models for swimming pool.
Any question or idea please don’t hesitate to inquire JNOD!
Compared with the traditional swimming pool heating method, the biggest advantage of Swimming Pool Heat Pump is that it can effectively improve the heating speed and constant temperature of the swimming pool, making the swimming pool water heating safer, more energy-saving and faster, so as to meet the different heating temperature requirements of the swimming pool.
Is the Swimming Pool Heat Pump safe to use?
What are the application advantages of Swimming Pool Heat Pump?
What are the benefits for consumers of the application of Swimming Pool Heat Pump?
Swimming Pool Heat Pump relies on the "reverse Carnot" principle to work, using clean and renewable raw materials (air energy + electricity) as energy, neither generating harmful gases to the human body nor causing pollution to the atmosphere. With only a small amount of electricity input, a large amount of heating benefits can be obtained, providing a 24-hour constant temperature for the swimming pool.
From the perspective of energy saving and safety, Swimming Pool Heat Pump is an ideal choice for indoor swimming pool heating equipment. It is powerful, stable and efficient. It adopts high-efficiency titanium bubble heat exchanger, which has high efficiency, corrosion resistance and ultra-high energy efficiency. Refrigeration accessories, high operating efficiency and energy saving. And it is safe and reliable, water and electricity are completely separated; it can also intelligently control, realize independent temperature control, intelligent defrosting, etc. It is widely used in various swimming pools, hotel swimming pools, SPA, hot springs, bubble pools, etc., and it is easy to use.
Swimming Pool Heat Pumpdoes not discharge any pollutants during operation, and there are no safety hazards such as fire, explosion, poisoning, etc., which is very safe and environmentally friendly. As a professional swimming pool constant temperature equipment, Tongyi Air Energy swimming pool special constant temperature heat pump is equipped with a triple disinfection filter protection system, which can automatically complete disinfection, adjust pH value, and collect tiny dirt and suspended particles (such as dandruff, dust, etc. in swimming pool water) ), hair and other pollutants, not only to ensure the cleanliness of the swimming pool water, but also to protect the normal operation of subsequent equipment, effectively reducing the workload of the staff. For swimming pool operators, Swimming Pool Heat Pump saves more than 65% of operating costs compared to hot water equipment using other energy sources, and the unit is fully automatic and intelligent, which greatly reduces labor costs.
The Swimming Pool Heat Pump keeps the indoor heated swimming pool at a constant temperature of 26-28 degrees. Normal swimming pools use cold water. Due to the low water temperature (0-10 degrees in winter, 10-20 degrees in summer), not many people can swim in cold water, especially children, the possibility of catching a cold is very high. The constant temperature swimming pool is heated by heating equipment and maintains a temperature of 26-28 degrees throughout the year, which is suitable for the human body and allows you to say goodbye to the risk of swimming colds.
Guangdong JNOD New Energy Technology Co., LTD. focuses on heat pump& electric boiler R&D, manufacturing and providing comprehensive energy-saving solutions.
As heat pumps are more and more popular in the market, people want to know if it's worthy to use it.
Of course Yes! Heat pump water heaters are worth the cost.
More Efficient
Heat pumps are significantly more energy efficient than normal electric or gas hot water heaters because instead of using energy to generate new heat, they collect existing ambient warmth and transfer it to the water. This efficiency can save you hundreds of dollars on energy bills each year.
Tax Incentives and Rebates
With tax incentives and state-sponsored sales rebates, energy efficient heat pump water heaters can actually be a more affordable choice than most homeowners would expect. Though the upfront cost is high, most homeowners pay back heat pump water heaters within the first or second year alone. And heat pump water heaters are long-lasting – a good, well-maintained heater can last between ten to fifteen years.
Environmentally Friendly
Because heat pumps are more energy efficient than conventional hot water heaters, they do not use as much electricity and/or natural gas, which reduces greenhouse gas emissions. In fact, it estimates that if all residential water heaters were replaced with heat pump water heaters, there would be up to 140 billion pounds of greenhouse gas emissions are saved annually.
We Jnod now provide various air to water heat pump, any question or need welcome to inquire us!
Our website:https://www.jnodheatpump.com
Water heating accounts for around 18% of the average home’s energy use. Switching to an energy-efficient heat pump water heater can make a difference on your utility bill and is an essential step in lowering the carbon footprint of your home.
We believe we JNOD are a very good heat pump supplier for you as following reason.
1. Complete Product Range:
JNOD has complete air to water heat pump product ranges, including heat pump water heaters, heating&cooling heat pump and swimming pool heat pump. We can satisfy most residential hot water and space heating need for apartment or single house.
2. Certification
Our All in one heat pump water heater gains the latest CE certificate and A+ ERP label. For some countries, distributor or install company can use them to apply the subsidies from government.
3. Multi-function
Regard to all in one hot water heat pump:
- If you look for hybrid hot water heat pump, choose the all in one heat pump. It’s a kind of electric + air source heat pump as there is an auxiliary electric heating inside as a backup.
- If there is a solar system, wires can directly connect to inverter, which can provide the electricity needed by heat pump, and then the need of grid can be reduced.
- If you want remote control, options like WiFi and RS485 can be provided.
4. OEM/ODM
If you have need of OEM/ODM, welcome to inquire us with the logo and design file you want, we will try our best to help you with better selling.
With the soaring price of gas and the emphasis on environmental protection in many countries around the world, heat pumps are becoming more and more important and popular among consumers and manufacturers. In the last 2 years, many various kinds of heat pumps have appeared on the market. In this article, we will teach you how to choose a good hybrid hot water heat pump, also called all in one heat pump water heater.
For a hot water heat pump, the water tank is very important, both the outcase and the interior are very important.
* Internal
At this point, we would recommend our customers to choose a hot water heat pump with an enameled water tank for the following reasons.
A. Good thermal insulation: Take JNOD's all in one heat pump with enameled tank as an example. After testing, when the water in the tank is boiled to the set temperature and then power off, the water in the tank will only have a temperature drop of 5-8 degrees Celsius after 24 hours. Such a hybrid heat pump is your wise choice.
B. Strong corrosion resistance: In areas with bad water quality, there are more impurities in the water. If you use the general iron water tank, the welding joints inside are prone to chemical reaction with impurities, which leads to the problem of water leakage.
* Outcase
Here we recommend that consumers choose galvanized steel plate as the shell material. There are businesses in the market will choose color plate. The service life of the color plate is very short, only 1-2 years. A long time inside the box exposed will also lead to water leakage problems in the tank.
Expect these suggestions will let you choose a better heat pump! Feel free to contact JNOD with any questions! Link:https://www.jnodheatpump.com
Guangdong JNOD New Energy Technology Co., LTD. focusing on heat pump& electric boiler R&D, manufacturing and providing comprehensive energy-saving solutions.
JNOD has a complete heat pump industry chain, and its products involves Swimming Pool Heat Pump, House Heating & Cooling Heat Pump, Domestic Hot Water Heat Pump, Heat Pump Dehumidifier, Commercial & Industrial High Temperature Water Heating Solution, Industrial and Agricultural Heat Pump Dryer,etc.The ultra-low temperature EVI heat pump has been widely used, too.
JNOD insisted on developing with technology innovation, it possessed of several national famous technicians and had invented multiply product patents. The company has been strictly implement the ISO international quality management system, and the products are of reliable guaranteed quality.
We are committed to providing customers the best hot water & heating solutions with our heat pump products, focusing on the latest technologies, strive for outstanding quality in our products and customer service.
Air heat pump water heater has low energy consumption (power consumption saves more than 2/3 compared to conventional electric water heaters), high thermal efficiency (heating speed is four times higher than conventional electric water heaters), Environmental protection and energy saving (reduces more than 2/3 compared to conventional electric water heaters) carbon dioxide emissions).
What are the differences between heat pump water heaters and air conditioners?
Why do heat pump water heaters improve the consumer experience?
What is the working process of the heat pump water heater?
The operating mode of the heat pump water heater is very different from that of the air conditioner, which determines the difference in the design concept between the heat pump compressor and the air conditioner compressor. Trouble-free, long-term stable operation of heat pump water heaters Compared to air conditioning systems, there is a big difference in the operating time. The operating time of heat pump water heater systems is much longer than that of air conditioning systems. The operating time of a heat pump water heater depends on the following factors: Air conditioning systems are often used in summer, but water heaters are mass-produced and run particularly long in winter. The time for heating a water tank in winter is several times as long as in summer, so it is necessary to confirm the operating mode of the heat pump water heater in winter.
According to statistical calculations, 2/3 of the service life of the heat pump water heater is consumed in winter. Since the water outlet temperature of the heat pump is over 55°C, the temperature of the water tank decreases when using. The liquefaction temperature is the main factor affecting the service life of the compressor. Under the condition of simultaneous operation, the total load of the compressor in the heat pump water heater is much higher than that of the compressor in the air conditioning system. The main motivation for consumers to buy water heaters with heat pump is energy saving and comfort. Consumers will thus consume more water, which also extends the working time of the heat pump. If the heat pump water heater is used for heating and service water applications, it can run for a long time during the heating period. From the combination of the above factors, it is evident that the main motor of the heat pump water heater will develop in the direction of miniaturization, and the actual operating time will be greatly extended.
A water heater with compression heat pump mainly consists of evaporator, compressor, condenser and expansion valve. Thermal Circular Process Throttling → Re-evaporation, whereby heat from the environment is transferred to the water.
Guangdong JNOD New Power Technology Co., LTD. sales team has extensive experience in overseas markets. We provide sincere and professional services, including OEM/ODM/project services, technology support, market analysis, use of design and assembly of installation. We have provided marketing consulting services and business solutions to customers from over 40 countries.
The iterative upgrade of technology has brought more possibilities and greater imagination to the swimming pool equipment industry. This is the case with the application of air energy technology. With the continuous advancement of the dual-carbon strategy, the emergence of Heating and Cooling Heat Pump not only refreshes people's experience, but also redefines the effect of energy saving and consumption reduction.
What changes can Heating and Cooling Heat Pump bring to consumers' lives?
Can the Heating and Cooling Heat Pump provide continuous heating?
What is the running cost of Heating and Cooling Heat Pump?
Heating and Cooling Heat Pump is a kind of air-conditioning water heater equipment that uses air as a cold (heat) source to provide air conditioning, heating and domestic hot water to indoor spaces.
There are five operating modes for the Heating and Cooling Heat Pump. The cooling and cooling heating water modes can be operated in summer; the heating and heating heating water modes can be operated in winter; the hot water mode can be operated separately in excessive seasons, so as to provide cooling, dehumidification, heating and domestic hot water to the living environment throughout the year. When the unit operates in the cooling and heating water mode, it can achieve full heat recovery, the total two-way energy efficiency ratio is above 7.0, and the domestic hot water is completely free.
Continuity Analysis of Heating and Cooling Heat Pump
Heating and Cooling Heat Pump heating and traditional solar heating are usually equipped with a water tank to store heat for indoor heating. However, the air energy heat pump can absorb low temperature heat energy from the low temperature environment, and then convert it into high temperature heat energy through the compressor, so as to This can continuously supply heating and hot water to meet indoor heating needs. However, when solar heating is insufficient in sunlight, it is difficult to heat the heating circulating water in the water tank, especially at night and in bad weather, the indoor heating effect will inevitably be affected.
When the outdoor light conditions are good, the operating cost of solar heating will be lower than that of Heating and Cooling Heat Pump, after all, the heat source mainly comes from free sunlight. However, at night and in rainy, windy and snowy weather, the thermal efficiency of the electric auxiliary heating used in solar heating equipment is much lower than that of Heating and Cooling Heat Pump heating equipment. Especially in winter, rainy, windy and snowy weather occupies most of the time. Therefore, if solar heating wants to get a good heating effect, it must pay more energy.
Guangdong JNOD New Energy Technology Co., LTD. has full experience in the field of energy products for more than 13 years. JNOD has kept growing rapidly during these years since it was established. In 2020, more than 60% of our heat pump products were exported to Europe, North America , Middle East, Australia, and other developed regions.
With the widely known advantages of air energy heat pump products such as cleanliness, environmental protection, energy saving, stability and comfort, heating with Heating and Cooling Heat Pump products has become a trend. More and more northern == home users and schools, hotels, hospitals When transforming the original heating system in other places, choose to use Heating and Cooling Heat Pump.
Compared with ordinary central air conditioning refrigeration and gas wall-hung boiler heating, what are the advantages of Heating and Cooling Heat Pump?
What are the advantages of using the Heating and Cooling Heat Pump?
What is the working principle of Heating and Cooling Heat Pump?
The common heating and cooling equipment on the market is mainly fluorine system heating and cooling air conditioning or the combination of gas wall-hung boiler heating and central air conditioning refrigeration.
The main advantage of Heating and Cooling Heat Pump compared to ordinary heating and cooling air conditioners is high comfort. The fluorine system heating and cooling air conditioner directly controls the indoor temperature through the flow of the refrigerant, and the refrigerant directly exchanges heat with the air. This heat exchange method has two disadvantages: First, the temperature of the air outlet of the air conditioner is very low or very high (7°C-12°C during cooling, 40°C-50°C during heating), the body feels very bad, and it is bitingly cold in summer. The winter is hot and dry; second, although the fluorine system air conditioner has a relatively fast cooling and heating speed, it will also cause a large amount of moisture in the air to be taken away due to the rapid heating and cooling speed, resulting in excessive indoor dehumidification and drying.
1) The unit of Heating and Cooling Heat Pump has high energy efficiency ratio, energy saving and electricity saving.
2) The water temperature of the Heating and Cooling Heat Pump is generally constant at 12-22°C, which is 7°C for the water supply in summer, 12°C for the return water, 45°C for the water supply in winter, and 40°C for the return water, and the temperature difference between them is small. , so the unit has less work and more energy.
During the operation of Heating and Cooling Heat Pump, the evaporator absorbs heat from the ambient heat energy in the air to evaporate the heat transfer working medium. After the working medium vapor is compressed by the compressor, the pressure and temperature rise. When the high-temperature vapor passes through the special annular pipe bonded on the outer surface of the water storage tank, the condenser condenses into liquid and transfers the heat to the water in the water storage tank of air source heat pump.
Guangdong JNOD New Energy Technology Co., LTD. has focused on the development and production of Heating and Cooling Heat Pumps for several years. And it commits to providing perfect service for every customer from all over the world.
Heat pump water heater is a new type of water heater. It converts air energy into heat energy through a heat pump to produce hot water. This water heater solves the disadvantage that solar energy cannot be used on rainy days. In addition, this water heater is more efficient compared to gas water heaters and electric water heaters. Environmental protection when you choose this water heater is a very good choice.
What is the main reason why air heat pump water heaters are popular in the market?
What is the workflow of a heat pump water heater?
What do you know about heat pump water heaters that can be used in hotels?
Air Source Water Heater is a new type of low carbon and environmentally friendly water heater. The operating cost of heat pump water heaters is only 1/4 of the cost of electric water heaters, which is very energy-saving and efficient. Originally, as a fourth-generation air water heater, its greatest feature is safety and money-saving! The operating costs of the air water heater are only 1/4 of the electric water heater, 1/6 of the gas water heater, 1/2 of the solar water heater, 2/3 of the fuel water heater and 3/5 of the gas heating system. The device absorbs the heat in the air to heat the cold water, and the cool air released does not pollute the environment and completely eliminates the safety risks such as flammability, explosion, electric shock and gas poisoning of ordinary water heaters.
1. The compressor compresses the low pressure refrigerant flowing back and converts it into a gas with high temperature and high pressure for discharge.
2. The high temperature and high pressure refrigerant gas flows through the copper pipe wrapped around the outside of the water tank, and the heat is passed through the copper pipe into the water tank. The cooled refrigerant becomes liquid under constant pressure and enters the evaporator after passing the expansion valve.
3. As the pressure of the evaporator is suddenly reduced, the liquid refrigerant is quickly evaporated into a gaseous state and absorbs a large amount of heat.
4. At the same time, under the action of the fan, a large amount of air flows through the outer surface of the evaporator, the energy in the air is absorbed by the evaporator, the air temperature drops quickly, and cold air is released and released.
5. The refrigerant that has absorbed a certain amount of energy is then returned to the compressor and enters the next circuit.
JNOD hot water heat pumps provide a highly efficient means of heating hot water for commercial and industrial applications. An average COP of 4.2 means that the energy efficiency is more than four times higher than that of conventional water heaters. It removes heat energy from the ambient air. This means savings of 60.75% of energy costs compared to electric water heaters.
Guangdong JNOD New Energy Technology Co., LTD. Provides marketing consulting services and business solutions to customers from over 40 countries. Customized solution for hot water supply based on the customer's market demand.