Split Type Heat Pump Hot Water Heater- Manufacturers Factory Suppliers From China

When the indoor swimming pool is used in winter, it is necessary to heat the pool water to make the water temperature reach 26-28 degrees, which requires a lot of thermal energy. Boilers, gas, and electricity are gradually eliminated due to their low thermal efficiency and environmental protection. More and more people will Option to use Swimming Pool Heat Pump. So in addition to environmental protection, what are the benefits of Swimming Pool Heat Pump?

Compared with traditional boilers, what are the advantages of Swimming Pool Heat Pump?

What advancements have the Swimming Pool Heat Pump made?

Why is the demand for Swimming Pool Heat Pump increasing?

Compared with traditional boilers, what are the advantages of Swimming Pool Heat Pump?

Compared with traditional boilers, Swimming Pool Heat Pump does not use any fuel such as coal, oil, gas, etc., and does not produce open flames and exhaust emissions. Therefore, the use of air source heat pumps not only protects the atmospheric environment, but also eliminates fire, explosion, poisoning, etc. Accident happens. Compared with ordinary electric water heaters, it consumes less power, avoids leakage accidents, saves energy and is environmentally friendly. Compared with solar water heaters, air energy heat pumps are not affected by weather, geography, climate and other factors when working Sunny can be used normally.

What advancements have the Swimming Pool Heat Pump made?

smart system

① The unit control system adopts intelligent control. When customers use it, they only need to set the air temperature, humidity, and pool water temperature, and then the equipment will enter the fully automatic operation state, and there is no need for special personnel to take care of it.

② Customers can learn air temperature, humidity and other data through the touch-type full-color screen. Real-time value of pool water temperature and operating status of equipment.

③ Customers can also choose a communication interface according to their needs to implement remote control, monitoring and connection with the system.

ventilation system

Customers can choose the intelligent ventilation system of Swimming Pool Heat Pump. After choosing this system, the unit will control the amount of fresh air entering the room according to the concentration of carbon dioxide in the room, which can greatly save the energy consumption during operation.

Why is the demand for Swimming Pool Heat Pump increasing?

Not only that, the advancement and development of sports equipment and facilities and equipment technology have also provided a foundation for more people to actively participate in fitness. Take swimming, the most popular sport, as an example. In the past, people swimming in open-air pools or public waters were easily limited by the temperature environment. If they accidentally caught a cold, it would be bad for their health, and microbial bacteria would grow in public waters. , the health situation is not optimistic. In recent years, with the advancement of Swimming Pool Heat Pump related supporting technical facilities, many swimming pools and other fitness places are equipped with heated swimming pools, and even schools, communities, villas, etc. are equipped with heated swimming pools, so that people can not only enjoy the hot summer. The fun of refreshing swimming can also have a comfortable swimming experience in the cold winter.

If you would like to receive more information about the Swimming Pool Heat Pump, please connect Guangdong JNOD New Energy Technology Co., LTD., and they will be happy to answer your question!

In the Heating and Cooling Heat Pump structure, the refrigerant directly exchanges heat with the air to be treated, without secondary heat exchange in the middle, which reduces the intermediate heat exchange links, which can effectively reduce the energy consumption of the system and improve the heat exchange efficiency.

What is the technological advancement of Heating and Cooling Heat Pump compared to traditional air conditioners?

Where can Heating and Cooling Heat Pump be used?

Why does Heating and Cooling Heat Pump become the choice of more and more consumers?

What is the technological advancement of Heating and Cooling Heat Pump compared to traditional air conditioners?

The refrigeration principle of the traditional air conditioner is to use the change of the physical state of the refrigerant. The change from the gaseous state to the liquid state will emit heat, and the change from the liquid state to the gaseous state will absorb heat. The "reverse Carnot" cycle used for Heating and Cooling Heat Pump is opposite to the refrigeration principle of traditional air conditioners. Using a "four-way electromagnetic reversing valve", a refrigeration cycle or a heating cycle can be realized, so that the car can get cold or hot air. . In the cycle of air-conditioning refrigerant, a large amount of heat will be released during the process of liquefying high-temperature and high-pressure gas into high-pressure liquid in the condenser, which is the principle of heat pump heat release. In winter, the reversing valve can be used to change the flow direction of the air-conditioning refrigerant. At this time, the evaporator acts as a condenser to release heat in the reverse cycle, forming a "heat source". At this time, only a small amount of electricity is consumed, and a large amount of heat from the outside can be transported and "pumped" into the pure electric vehicle to become a heat pump. However, the heating effect of heat pumps in low temperature environments needs to be improved.

Where can Heating and Cooling Heat Pump be used?

The heating principle of Heating and Cooling Heat Pump is completely different from that of traditional solar water heaters. Air source heat pumps use air, water, solar energy, etc. as low-temperature heat sources. The hot water is directly sent to the user through the circulation system as hot water supply or small area heating using fan coil units. Heating and Cooling Heat Pump is the best solution for large, medium and small hot water centralized supply systems in school dormitories, hotels, bathing centers and other places.

Why does Heating and Cooling Heat Pump become the choice of more and more consumers?

Heating and Cooling Heat Pump is one of the most advanced energy utilization products in the world today. With the rapid development of the economy and the improvement of people's living standards, hot water for domestic use has become a necessity for people's lives. However, traditional water heaters (electric water heaters, fuel-fired water heaters, and gas water heaters) have disadvantages such as high energy consumption, high cost, and serious pollution; The operation of energy-saving and environmentally friendly solar water heaters is restricted by meteorological conditions.

After reading these words, do you have a interest to order an Heating and Cooling Heat Pump ? If necessary, you can contact Guangdong JNOD New Energy Technology Co., LTD., which is an advance Heating and Cooling Heat Pump Manufacturer.

A swimming pool heat pump works to keep a constant pool temperature and extend the swimming season. Over the past years, it has stood out from other similar products such as boilers and the electric water heater and gained a growing market share. According to Arizton’s report, the pool heat pump market is expected to grow at a CAGR of over 5% during 2019−2025. Why does the pool heat pump become increasingly popular?

1. The rising economy and preference for swimming

Swimming has a long history and has been very favorable in the western world like North America, Europe, and Australia. It is assumed that the heat pump segment will increase stably in the foreign market owing to the consumption habit formed decades ago. Over the past few years, the thriving economy has made people out of western world more favorable for this sport. The Asia Pacific (APAC) region is expected to grow at a CAGR of around 6% in terms of revenues with a rise in swimming pool construction, high disposable income, and growth in awareness. As people enjoy a higher living standard and the group of villas-resident booms, the heated pool which can protect the privacy and bring better life quality, becomes a must for them.

2. A wave of home workouts during the pandemic, an engine for the private pool economy

During the Covid-19 pandemic, consumers have to stay at home and cannot go to the beach or public swimming pools, so private pools and hot tubs have met a wave of demand. And heat pumps also benefit from the fad. By its core competitiveness and the prosperous market, the heat pump one day will take the lead in the pool industry.

3.Energy efficiency and Cost-effectiveness

Known as one of the most energy-efficient pool heating options available, the heat pump is an “energy sipper” in comparison to other options. While electric heaters will use resistors and gas heaters burn fuel, heat pumps generate heat from ambient air, meaning it harvest heat from the air around it. The tiny amount of energy a heat pump uses to compress and convert is nothing compared to the amount of energy other heating options use.It’s greatly save energy and cut down your electricity bill.

4. Eco-Friendly

When you use a gas heater you are relying on combustion of the fuel. They continually burn gas in order to produce heat. This process comes with environmental consequences by emitting CO2 that destroys our ozone layer. A heat pump, however, does not burn anything and pull minimal electricity to harvest ambient air, and produces zero CO2 emissions.

5. Durability

Like any investment, you want your pool and all of its moving parts to last for years to come. Gas and electric heaters will only allow for 5-10 years max of usage and any repairs you might need on them will break the bank. A heat pump is built with longevity in mind and at a minimum will last 10-20 years, and with proper maintenance can last even longer.

It's no doubt an ideal choice for the green lifestyle, right?

Please feel free to contact our JNOD sales team when you need a swimming pool heat pump.OEM and ODM project are acceptable.

Email: info@jnodboiler.com  Phone: +86-757-23617848

The heating and cooling heat pump is a device that transfers heat energy from a low-level heat source to a high-level heat source, and is also a new energy technology that has attracted a lot of attention worldwide. It differs from the well-known mechanical equipment, which can increase the potential energy"Pumps"; A heat pump usually first extracts inferior heat energy from natural air, water or earth, then performs work by electricity, and then provides people with available energy that can be used. of high quality thermal energy.

What is the working medium of the heating and cooling heat pump?

What role does the heating and cooling heat pump play?

What do you know about heating and cooling heat pumps?

What is the working medium of the heating and cooling heat pump?

The working medium of the heating and cooling heat pump used to be Freon, but since Freon adversely affects the Earth's atmospheric ozone to protect the Earth's ecological environment, in addition to improving the cooling coefficient of the heat pump and effective use, science is also committed to new technologies in various countries. With the development of quality, the working fluid was used as a replacement for Freon. However, the work equipment of most Chinese manufacturers today is still R22, and the era of using environmentally friendly work equipment R417A and 134A has not yet arrived. Some countries, such as Japan, have taken the lead in using CO2 as a working medium to avoid damaging the ozone layer. (Therefore, the copper pipes must be firmly connected during installation to prevent R22 from leaking.) In addition, the above R22, R417A, 134A and CO2 do not harm the human body. Even if there is a leak, all the equipment is still safe.

What role does the heating and cooling heat pump play?

The low temperature heat sources normally used in heat pumps for heating and cooling are the media around us. Air, river water, seawater, municipal wastewater, surface water, groundwater, treated water, fire pits or working fluids, which are discharged from industrial production plants these working fluids often have similar temperatures to the surrounding medium. The operating principle of the heating and cooling heat pump is the same as that of the compression chiller. In order to fully exploit its efficiency, the small air conditioner is cooled with the same equipment in summer or heated in winter. When heating in winter, the evaporator and condenser in the air conditioning system are exchanged via a switching valve.

What do you know about heating and cooling heat pumps?

Heat pumps for heating and cooling are an intelligent, efficient and versatile solution for year-round heating, cooling and hot water supply solutions. In addition to their flexibility and wide application, they are energy efficient and environmentally friendly, with advanced EVI technology and green refrigerant R32/R410A. So you can enjoy a comfortable home and save energy at the same time.

JNOD insisted on developing with technological innovation, it had several nationally famous technicians and had invented several product patents. The company has strictly implemented the international ISO quality management system, and the products are of reliable guaranteed quality.

Heating and Cooling Heat Pump installs a four-way reversing valve on the basis of ordinary air conditioners, and changes the operation of the valve, which can exchange the functions of the evaporator and the condenser of the original air conditioner, so as to change the function of cooling indoor air. Changed to the function of heating indoor air.

What are the structural advantages of the Heating and Cooling Heat Pump?

What is the user's experience with Heating and Cooling Heat Pump?

Why the use of Heating and Cooling Heat Pump can save resources?

What are the structural advantages of the Heating and Cooling Heat Pump?

The evaporator of the Heating and Cooling Heat Pump adopts the method of countercurrent heat exchange for heat exchange to enhance the heat exchange effect; moreover, the heat exchange method combining fins and tube bundles is used, and each row of heat exchange tubes is arranged in a cross. The method of turbulence increases the convective heat transfer coefficient on the exhaust side and enhances the heat transfer effect;

The refrigerant tube bundle of Heating and Cooling Heat Pump is made of red copper, and the fins are made of hydrophilic aluminum foil. The condensed water in the exhausted air drips on the surface of the heat exchanger to form a water film that is conducive to heat exchange, increasing the heat exchange coefficient and enhancing the heat exchange effect;

The Heating and Cooling Heat Pump has an advanced microcomputer control system, and adopts a special programmable controller PLC for imported air-conditioning equipment, which has the ability to resist electromagnetic interference, intelligent coupling between building load and unit heating; Display, fault alarm and diagnosis functions.

What is the user's experience with Heating and Cooling Heat Pump?

The Heating and Cooling Heat Pumpis also very comfortable, clean and safe. In the past, when burning coal, it was not only dirty, tiring and troublesome, but also the temperature was not high, usually 14-16 degrees, and you had to wear cotton-padded clothes at home. Now open to 18 degrees and wear a thin sweater. If the weather is cold, turn up the temperature. Anyway, the Heating and Cooling Heat Pump is also very convenient, and you can adjust the temperature by pressing a button.

Why the use of Heating and Cooling Heat Pump can save resources?

The Heating and Cooling Heat Pump unit has the dual functions of supplying cold water in summer and supplying hot water in winter. Using air as the heat source and cooling source can greatly save water and avoid the pollution of water quality. The air-cooled modular cold and hot water unit can be placed on the top floor of the building or on the outdoor platform to work, eliminating the need for a dedicated cold source machine room and boiler room.

JNOD focuses on heat pump& electric boiler R&D, manufactures and provides comprehensive energy-saving solutions. Our sales team have extensive experience of overseas markets. We provide sincere and professional services, including OEM/ODM/project services, technology support, market analysis, usage of design and composition of installation.

During the working process of the heat pump water heater, it consumes 1-part electricity to get the compressor running, and at the same time, it can absorb about 4-part heat from the ambient air and transfer it to the water. Therefore, air energy water heaters can save almost 3/4 electricity compared to electric water heaters. That is, the electric water heater consumes 4 kWh electricity to produce hot water, and the air energy water heater requires only 1 kWh electricity.

What role does the refrigerant play in the unit composition of the heat pump water heater?

What is the physical principle of how a heat pump water heater works?

What is the significance of the appearance of heat pump water heaters?

What role does the refrigerant play in the unit composition of the heat pump water heater?

The heat pump unit contains a special heat-absorbing refrigerant. In the liquefied state, the normal temperature is below minus 20°C. Therefore, there is a temperature difference between it and the outside temperature. The refrigerant absorbs the outside temperature and is stored in the evaporator. Generate pressure and evaporate and evaporate, and through the work of the heat exchanger (heat pump), when the refrigerant is transferred from the evaporated state to the liquefied state, the objectively existing heat is released to the storage water in the water tank.

What is the physical principle of how a heat pump water heater works?

The heat pump water heateruses the heat absorbing medium (refrigerant) in the device to collect heat energy from the air or the natural environment, heats the cold water quickly through the heat exchanger and at the same time releases the cold air, avoiding the lack that conventional solar products can not work in rainy weather and at night. As long as the outside temperature is above 1-15 degrees, it can work normally, so can be more efficient and energy-saving, at the same time does not occupy open space, and is easy to install and flexible to use.

What is the significance of the appearance of heat pump water heaters?

With the rapid development of the economy and the improvement of people's living standards, water heating has become a necessity for people's lives. However, conventional electric water heaters have the disadvantages of large energy consumption, high cost and serious environmental pollution; while the operation of energy-saving and environmentally friendly solar water heaters is also restricted due to weather conditions. The heating principle of the air heat pump is different from that of the conventional solar water heater. The air heat pump uses air, water, solar energy, etc. as a low temperature heat source, and the air heat pump uses the electrical energy as energy to absorb heat from the low temperature side to heat the service water.

Guangdong JNOD New Energy Technology Co., LTD. can provide product certification requirements for local markets; provision of catalogues, technical manuals; exhibit together with customers at leading industrial fairs; Advertise in local market media through our press release resources.

Under normal circumstances, when the average temperature is -5°C, the Heating and Cooling Heat Pump can generate more than three times the amount of heat per kWh of electricity consumed, and the energy saving efficiency is as high as 75% compared to the direct conversion of electrical energy into heat; when the average temperature is - At 15°C, 1 kWh of electricity consumption can generate more than twice the heat; even at -25°C, the Heating and Cooling Heat Pump can normally provide heat for the room.

What are the similarities and differences between Heating and Cooling Heat Pump and solar water heaters?

What is PTC heating with Heating and Cooling Heat Pump?

What are the advantages of using the Heating and Cooling Heat Pump?

What are the similarities and differences between Heating and Cooling Heat Pump and solar water heaters?

From the scope of application, heating continuity, operating cost, and installation conditions, Heating and Cooling Heat Pumpis easier to popularize than solar heating equipment, and solar heating equipment will be more affected by environmental factors. At the same time, the thermal efficiency of Heating and Cooling Heat Pump is very high, consuming 1 kWh of electricity can get three heat energy, and even if the thermal efficiency of solar energy reaches 100%, consuming 1 kWh of electricity can only generate 1 heat energy. It can be seen that the public is most concerned about energy saving. When the environment is harsh in winter, the energy consumption of Heating and Cooling Heat Pump is lower than that of solar heating equipment.

What is PTC heating with Heating and Cooling Heat Pump?

PTC electric heater is a kind of heater with automatic temperature control and power saving. It uses PTC heat-sensitive ceramic element as heating source, corrugated sheet made of aluminum alloy as radiator, and the heater is composed of bonding and welding. . Electric vehicle air-conditioning heater PTC generally collects data from temperature sensors through the air-conditioning controller, and adjusts the output power to achieve temperature setting. Currently widely used in pure electric vehicles. However, when the Heating and Cooling Heat Pump is used for heating in winter, the power consumption of the battery is very large, which seriously affects the cruising range. Now they have turned their attention to the heat pump solution, or the parallel solution of the two.

What are the advantages of using the Heating and Cooling Heat Pump?

First, energy saving is beneficial to the comprehensive utilization of energy. Heating and Cooling Heat Pump absorbs the low temperature heat energy in the air, and converts it into high temperature heat energy after being compressed by the compressor, and its energy saving effect is quite significant;

Second, Heating and Cooling Heat Pump is conducive to environmental protection;

Third, the combination of cold and heat, the application rate of Heating and Cooling Heat Pump is high, saving investment,

Fourth, because the Heating and Cooling Heat Pump is electrically driven, it is more convenient to control.

The Heating and Cooling Heat Pump has achieved an irreplaceable position in furniture design. Guangdong JNOD New Energy Technology Co., LTD. is committed to providing various Heating and Cooling Heat Pumps of high quality for all customers from all over the world.

The Heating and Cooling Heat Pump is driven by an electric motor, uses the heat in the air as a low-temperature heat source, exchanges heat through the air conditioner condenser or evaporator, and then passes through the circulation system to extract or release heat energy, and use the unit circulation system to transfer the energy to the building. It can meet the needs of users for domestic hot water, floor heating or air conditioning.

What is the cycle between the Heating and Cooling Heat Pump and the natural environment?

What is the principle of Heating and Cooling Heat Pump?

Does the Heating and Cooling Heat Pump make noise?

What is the cycle between the Heating and Cooling Heat Pump and the natural environment?

The compressor outlet of the Heating and Cooling Heat Pump is high-temperature and high-pressure gas, which is transformed into a high-pressure and low-temperature vapor-liquid mixture through the heat exchange of the condenser. The low-temperature gas enters the evaporator to evaporate and absorb heat, and absorb the low-grade heat energy from the outside world (which can be rivers, lakes, groundwater, underground soil layers, air, etc., which we call water source, ground source, and air source heat pump), and finally the evaporator comes out. The low pressure gas enters the compressor to complete the cycle.

What is the principle of Heating and Cooling Heat Pump?

Heating and Cooling Heat Pump is an evolved product of air conditioners. An electromagnetic four-way valve (also known as a reversing valve) is installed in the refrigeration system. Through the switching direction of the four-way valve, the flow direction of the refrigerant is changed, and the air conditioner can hot. The high-temperature and high-pressure vapor-like refrigerant discharged from the compressor flows to the condenser in the heat preservation water tank, transfers heat to the tap water passing through the water tank, and then throttles and reduces the pressure through the expansion valve, and evaporates and absorbs heat in the evaporator of the main outdoor heat pump group. Use the working fluid to absorb the heat in the outdoor air. The Heating and Cooling Heat Pump absorbs the heat in the outdoor air and transfers it to the tap water in the insulated water tank. It is more energy-saving, fast and safe than simply heating with an electric heater, and the outdoor thermal energy potential is infinite.

Does the Heating and Cooling Heat Pump make noise?

Noise problem, almost all of today's Heating and Cooling Heat Pumps use full frequency conversion technology, indoor unit frequency conversion, heat pump host frequency conversion, fan frequency conversion, etc. The noise value of the heat pump host is below 45 decibels, and the indoor noise is still below 20 decibels. Neither users nor neighbors will be affected.

JNOD has a complete heat pump industry chain, and its products involve Swimming Pool Heat Pump, House Heating & Cooling Heat Pump, Domestic Hot Water Heat Pump, Heat Pump Dehumidifier, Commercial & Industrial High Temperature Water Heating Solution, Industrial and Agricultural Heat Pump Dryer, etc. The ultra-low temperature EVI heat pump has been widely used, too.

2022-11-24 · OEM Full DC Inverter Air to Water Hot Water Heater Heat Pump for Pool Reference FOB Price Get Latest Price US

Summerwave Inver-Eco was built with families in mind heating your pool water quietly and efficiently with minimal fuss, while maintaining an Eco-Friendly status. Inver-Eco will save you money with it’s quiet heating efficiency but not break …

2022-11-14 · Forced air simply refers to the duct system and the air handler. It is a system where a blower is used to move air via a duct system. The term, however, does not suggest a specific heat source. Heat pump, on the other hand, talks about a system that circulated heat. The heat pump serves as the source of the cool (warm) air.

R32 DC INVERTER SWIMMING POOL HEAT PUMP R32 5KW~35KW DC Inverter Swimming …

Fully packaged unit, requiring only electrical and connections to be made on installation Factory charged with refrigerant R407, making it ideal for commercial or industrial use to produce hot water up to 65°C Option to utilize refrigerant R134a for special hot water applications Click here to learn more about heat pump water heaters Product Images

Heat and cool your home or office efficiently with a wholesale hot water heater heat pump. Visit for heat pump water heaters that suit your needs and budget. MENU

JNOD New Energy Durable OEM Heat Pump Water Heater For Hotels. *Max. 75℃ Outlet Water Temperature The hot water heat pump can satisfy most demands of residential sanitary hot …

Eco Inverter 5kw Swimming Pool Heat Pump, find complete details about Eco Inverter 5kw Swimming Pool Heat Pump, Eco Swimming Pool Heat Pump, Inverter Swimming Pool Heat Pump, Eco Heat Pump for Swimming Pool - MICOE