











The Swimming Pool Heat Pump unit dehumidifies the indoor air while keeping the indoor air at a constant temperature. In order to save energy, the air heat is fully recycled during the operation of the equipment, and the recovered heat is used to heat the pool air or pool water through the regeneration system to ensure that the indoor air is at a constant temperature. The condensed water produced by de-temperature can be directly discharged outdoors or recycled into the swimming pool to supplement the pool water.
What are the components of Swimming Pool Heat Pump?
What are the areas of use of the Swimming Pool Heat Pump?
What are the precautions for the use of Swimming Pool Heat Pump?
1. The product composition of Swimming Pool Heat Pump:
Rack, heat exchanger, compressor, fan, pool water heat pump heating water cooling condenser, energy regulating valve, solenoid valve, power distribution cabinet, operation control system, etc.
2. Product configuration of Swimming Pool Heat Pump:
(1) Compressor: Copeland hermetic scroll compressor
(2) Heat exchanger: high-efficiency anti-corrosion copper tube sleeve coated aluminum fin or copper tube copper sheet
(3) Pool water heat pump auxiliary heating condenser: copper-titanium alloy material
(4) Energy regulating valve of refrigeration system: American Sporlan or Danfoss
(5) Fan: Sino-German joint venture fan, horizontal structure adopts Siemens or ABB motor with inner rotor pulley
(6) Main electrical appliances: Siemens components, the operation control system adopts Siemens touch screen PLC with communication interface and firefighting linkage.
Swimming Pool Heat Pump offers residential and commercial pool heaters, portable mini pool heat pumps and thermal water heating. It is an efficient, economical and green way to use environmentally friendly refrigerants R32 and R410A and titanium heat exchangers to heat the pool water. If you are looking for an energy-efficient and cost-effective way to heat your pool, we would undoubtedly recommend our Air Source Pool Heat Pump.
1. Do not use or store gasoline or other flammable and explosive gases and liquids next to the Swimming Pool Heat Pump, otherwise it will cause danger. Do not use the main power switch to turn the pool heat pump on or off, provide an operable switch.
2. Do not stuff anything into the air outlet of the Swimming Pool Heat Pump, it is very dangerous. The fan runs at high speed and may cause personal injury.
3. The ambient temperature of Swimming Pool Heat Pump is -10~38℃, and the water pressure is 0.20~0.6Mpa. If the heat pump is used in an environment other than the above conditions, it may cause the heat pump function to fail. At this time, the installation site needs to be changed.
The demand for Swimming Pool Heat Pump is also growing. Guangdong JNOD New Energy Technology Co., LTD. has been committed to providing customers with the best quality Swimming Pool Heat Pump for many years.
Swimming Pool Heat Pump is equipped with high-quality brand scroll compressors, with stable operation, low vibration, low noise, and low failure rate; key components such as thermal expansion valves, electronic appliances, etc. are well-known brand components with reliable performance.
How to choose a truly eco-friendly Swimming Pool Heat Pump?
What is the function of the Swimming Pool Heat Pump damping system?
Why choose an energy-efficient Swimming Pool Heat Pump?
The initial heating determines the model selection. The real energy saving stage of the Swimming Pool Heat Pump depends on the "constant temperature" period.
Select frequency conversion, more energy saving, the key to Swimming Pool Heat Pump lies in the operation logic of frequency conversion technology. In the constant temperature stage, the frequency conversion technology can enable the equipment to operate intelligently at a low frequency and match the real-time heating demand. There is no need to continuously heat the pool water by repeatedly starting and stopping like a fixed-frequency heat pump, so as to achieve the purpose of energy saving. We can compare the energy saving performance of fixed frequency heat pump and variable frequency heat pump under the same conditions.
Due to the difference in temperature, the heating efficiency of the heat pump will also be different. To compare the energy-saving effect in the constant temperature stage, we chose a fixed-frequency heat pump with the same heating level as the variable-frequency heat pump (IPHC150T) selected in the previous step at an air temperature of 26 °C (26 °C is generally used as the test temperature in the laboratory). Frequency selection is 60kw.
① The independent suspension shock absorption system makes the fan and motor run more quietly and reduces the noise caused by air disturbance.
② An integral base carries the fan and the motor, and according to the load-bearing distribution of each part, different types and quantities of shock absorbers are correspondingly configured to avoid jumping, anti-vibration and resonance, and make the operation of the fan and the motor more stable.
③ The fan and the box are isolated by flexible connection to avoid vibration transmission.
Considering indoor air quality, Swimming Pool Heat Pump is equipped with fresh air treatment function and exhaust function.
Considering the operating cost of the constant temperature heat removal pump unit, the Swimming Pool Heat Pump can use a large amount of outdoor low-humidity fresh air to adjust the humidity of the indoor air in spring and autumn, reducing operating costs.
In order to prevent the circulating air from affecting the service life of the Swimming Pool Heat Pump, the key components and sheet metal structure of the equipment are treated with anti-corrosion during the manufacturing process, and the compressor, power distribution cabinet and control system are isolated from the wind system.
Guangdong JNOD New Energy Technology Co., LTD. is committed to providing customers the best hot water & heating solutions with our heat pump products, focusing on the latest technologies, strive for outstanding quality in our products and customer service.
When the indoor swimming pool is used in winter, it is necessary to heat the pool water to make the water temperature reach 26-28 degrees, which requires a lot of thermal energy. Boilers, gas, and electricity are gradually eliminated due to their low thermal efficiency and environmental protection. More and more people will Option to use Swimming Pool Heat Pump. So in addition to environmental protection, what are the benefits of Swimming Pool Heat Pump?
Compared with traditional boilers, what are the advantages of Swimming Pool Heat Pump?
What advancements have the Swimming Pool Heat Pump made?
Why is the demand for Swimming Pool Heat Pump increasing?
Compared with traditional boilers, Swimming Pool Heat Pump does not use any fuel such as coal, oil, gas, etc., and does not produce open flames and exhaust emissions. Therefore, the use of air source heat pumps not only protects the atmospheric environment, but also eliminates fire, explosion, poisoning, etc. Accident happens. Compared with ordinary electric water heaters, it consumes less power, avoids leakage accidents, saves energy and is environmentally friendly. Compared with solar water heaters, air energy heat pumps are not affected by weather, geography, climate and other factors when working Sunny can be used normally.
smart system
① The unit control system adopts intelligent control. When customers use it, they only need to set the air temperature, humidity, and pool water temperature, and then the equipment will enter the fully automatic operation state, and there is no need for special personnel to take care of it.
② Customers can learn air temperature, humidity and other data through the touch-type full-color screen. Real-time value of pool water temperature and operating status of equipment.
③ Customers can also choose a communication interface according to their needs to implement remote control, monitoring and connection with the system.
ventilation system
Customers can choose the intelligent ventilation system of Swimming Pool Heat Pump. After choosing this system, the unit will control the amount of fresh air entering the room according to the concentration of carbon dioxide in the room, which can greatly save the energy consumption during operation.
Not only that, the advancement and development of sports equipment and facilities and equipment technology have also provided a foundation for more people to actively participate in fitness. Take swimming, the most popular sport, as an example. In the past, people swimming in open-air pools or public waters were easily limited by the temperature environment. If they accidentally caught a cold, it would be bad for their health, and microbial bacteria would grow in public waters. , the health situation is not optimistic. In recent years, with the advancement of Swimming Pool Heat Pump related supporting technical facilities, many swimming pools and other fitness places are equipped with heated swimming pools, and even schools, communities, villas, etc. are equipped with heated swimming pools, so that people can not only enjoy the hot summer. The fun of refreshing swimming can also have a comfortable swimming experience in the cold winter.
If you would like to receive more information about the Swimming Pool Heat Pump, please connect Guangdong JNOD New Energy Technology Co., LTD., and they will be happy to answer your question!
Guangdong JNOD New Energy Technology Co., LTD. focusing on heat pump& electric boiler R&D, manufacturing and providing comprehensive energy-saving solutions.
JNOD has a complete heat pump industry chain, and its products involves Swimming Pool Heat Pump, House Heating & Cooling Heat Pump, Domestic Hot Water Heat Pump, Heat Pump Dehumidifier, Commercial & Industrial High Temperature Water Heating Solution, Industrial and Agricultural Heat Pump Dryer,etc.The ultra-low temperature EVI heat pump has been widely used, too.
JNOD insisted on developing with technology innovation, it possessed of several national famous technicians and had invented multiply product patents. The company has been strictly implement the ISO international quality management system, and the products are of reliable guaranteed quality.
We are committed to providing customers the best hot water & heating solutions with our heat pump products, focusing on the latest technologies, strive for outstanding quality in our products and customer service.
Air source heat pump water heaters have the characteristics of high efficiency and energy saving. Its energy saving effect is 4 times that of electric water heaters, 3 times that of gas water heaters, and about 2 times that of solar water heaters.
Is there a difference between an air source heat pump water heater and a normal water heater?
What are the environmental protection features of heat pump water heaters?
How does the heat pump water heater work?
Environmental protection, the heat pump water heater realizes that there is hot water whenever you want. Because it does not use electric heating elements for direct heating, compared with electric water heaters, it eliminates the potential safety hazard of electric leakage; compared with gas water heaters, there is no gas leakage, or Safety hazards such as carbon monoxide poisoning, so it has better safety performance. The air energy heat pump is regenerative, and the heating function is automatically activated according to the temperature in the water tank to ensure sufficient supply of hot water for 24 hours, so there is no such problem as the gas water heater that cannot meet the hot water for multiple faucets at the same time, nor will it There is a problem that the capacity of the electric water heater is small, and many people need to wait for a bath. The hot water is ready to use, the water output is large, and the water temperature is stable, meeting all your expectations for hot water. Because its power consumption is only one-fourth of the same amount of electric water heater, which is equivalent to using the same amount of hot water, using an air-energy heat pump, the electricity bill is only one-fourth of that of electric heating. Calculated for a family of 4, the normal consumption of hot water is about 200l/day. Electric water heaters cost about 4 yuan/day for heating, while heat pump water heaters only cost about 1 yuan/day, saving 1,000 yuan a year.
Environmental protection of heat pump water heaters: using clean energy, no waste gas, waste water, waste residue, and no thermal effect on the air. The use of environmentally friendly heat medium, cfc-free, will not cause damage to the atmospheric ozone layer. Uses of heat pump water heaters: heat pump water heaters can be used in hot water systems with a temperature requirement lower than 65°C, such as bathing, sauna, swimming pool, foot bath, beauty salon, agricultural breeding, etc. The heat pump water heater has a high energy efficiency ratio and is more energy-saving.
A heat pump water heater is essentially a heat lifting device. The function of the heat pump is to absorb heat from the surrounding environment and transfer it to the object being heated (a higher temperature object). Its working principle is the same as that of a refrigerator. It works according to the reversed Carnot cycle, the only difference is that the working temperature range is different.
Guangdong JNOD New Energy Technology Co., LTD. has been a Chinese pioneer in heat pump water heater for several years. They can provide any type of heat pump water heaters you need. At the same time, their after-sales service is also very considerate.
Heating and cooling heat pump is a device that transfers thermal energy from a low temperature heat source to a high temperature heat source. for cooling and heating. The low-temperature heat sources usually used in heat pump installations are the media around us - air, river water, sea water, urban sewage, surface water, groundwater, reclaimed water, fire pools, or the working fluid discharged from industrial production equipment, these working fluids Often has a similar temperature to the surrounding medium.
How does the heating and cooling heat pump work?
Compared with ordinary central air conditioning refrigeration and gas wall-hung boiler heating, why does heating and cooling heat pump feel better?
What are the installation precautions for heating and cooling heat pump?
Water flows from high to low, and heat is transferred from high-temperature objects to low-temperature objects, which is a natural law. However, in real life, for the needs of agricultural irrigation, domestic water, etc., people use water pumps to send water from low places to high places. Similarly, in today's increasingly tense energy environment, in order to recover the heat in the low-temperature hot gas usually discharged into the atmosphere, the low-temperature hot water discharged into the river, etc., the heating and cooling heat pump is used to transfer the heat energy from the low-temperature objects to the high-temperature objects. Then the high temperature object is used to heat water or heating, so that the heat can be fully utilized. The working principle of the heat pump system is consistent with the working principle of the refrigeration system.
Heating and cooling heat pump has an additional heat exchange procedure in the cycle process, and the temperature difference of the system heat exchange is smaller (the air temperature of the fan coil unit in summer is 15℃-20℃, and the air temperature of the fan coil unit in winter is about 32℃) , the wind blowing out is softer, it will not take too much moisture, and the comfort is much better.
The installation location of the heating and cooling heat pump is a problem. Many people look at the installation example and think that the heat pump host with a water tank takes up too much space. The installation of the elevator apartment has to occupy a large living balcony or kitchen space. In fact, the air energy heat pump is also related to the power Related, the equipment of a large apartment is very large, and the equipment of a small apartment will be very small, and it can even be installed on an ordinary central air-conditioning unit.
Guangdong JNOD New Energy Technology Co., LTD. can provide product certification requirements for local markets; provide catalogs, technical manuals; co-exhibit with the clients in leading industry exhibitions; do promotion on the local market's media by our news release resources.
Under normal circumstances, when the average temperature is -5°C, the Heating and Cooling Heat Pump can generate more than three times the amount of heat per kWh of electricity consumed, and the energy saving efficiency is as high as 75% compared to the direct conversion of electrical energy into heat; when the average temperature is - At 15°C, 1 kWh of electricity consumption can generate more than twice the heat; even at -25°C, the Heating and Cooling Heat Pump can normally provide heat for the room.
What are the similarities and differences between Heating and Cooling Heat Pump and solar water heaters?
What is PTC heating with Heating and Cooling Heat Pump?
What are the advantages of using the Heating and Cooling Heat Pump?
From the scope of application, heating continuity, operating cost, and installation conditions, Heating and Cooling Heat Pumpis easier to popularize than solar heating equipment, and solar heating equipment will be more affected by environmental factors. At the same time, the thermal efficiency of Heating and Cooling Heat Pump is very high, consuming 1 kWh of electricity can get three heat energy, and even if the thermal efficiency of solar energy reaches 100%, consuming 1 kWh of electricity can only generate 1 heat energy. It can be seen that the public is most concerned about energy saving. When the environment is harsh in winter, the energy consumption of Heating and Cooling Heat Pump is lower than that of solar heating equipment.
PTC electric heater is a kind of heater with automatic temperature control and power saving. It uses PTC heat-sensitive ceramic element as heating source, corrugated sheet made of aluminum alloy as radiator, and the heater is composed of bonding and welding. . Electric vehicle air-conditioning heater PTC generally collects data from temperature sensors through the air-conditioning controller, and adjusts the output power to achieve temperature setting. Currently widely used in pure electric vehicles. However, when the Heating and Cooling Heat Pump is used for heating in winter, the power consumption of the battery is very large, which seriously affects the cruising range. Now they have turned their attention to the heat pump solution, or the parallel solution of the two.
First, energy saving is beneficial to the comprehensive utilization of energy. Heating and Cooling Heat Pump absorbs the low temperature heat energy in the air, and converts it into high temperature heat energy after being compressed by the compressor, and its energy saving effect is quite significant;
Second, Heating and Cooling Heat Pump is conducive to environmental protection;
Third, the combination of cold and heat, the application rate of Heating and Cooling Heat Pump is high, saving investment,
Fourth, because the Heating and Cooling Heat Pump is electrically driven, it is more convenient to control.
The Heating and Cooling Heat Pump has achieved an irreplaceable position in furniture design. Guangdong JNOD New Energy Technology Co., LTD. is committed to providing various Heating and Cooling Heat Pumps of high quality for all customers from all over the world.
The heating and cooling heat pump is a highly efficient, energy-saving device that makes full use of inferior thermal energy. Heat can be transferred spontaneously from a hot object to a cold object, but not spontaneously in the opposite direction.
How does the heating and cooling heat pump work?
What does the operating time of the heating and cooling heat pump have to do?
What is the function of the heating and cooling heat pump?
In the heating and cooling circuit of the heat pump, the heat Q0kcal/h is obtained from the low temperature heat source (outside air or circulating water whose temperature is higher than the evaporation temperature t0) and the mechanical work ALkcal/h is consumed, while the heat of Q0kcal/h is obtained from the low temperature heat source (outside air or circulating water whose temperature is higher than the evaporation temperature t0) and the mechanical work ALkcal/h is consumed. The heating system) provides the heat of Q1kcal/h, and the relationship between these heats corresponds to the first main law of thermodynamics, ie Q1=Q0+ALkcal/h
If the heating and cooling heat pump is not used and the heat is converted by mechanical work (or the high temperature heat source is heated directly by electrical energy, the heat obtained is ALkcal/h, and after the heat pump device is used, the high temperature heat source (heating system) receives more heat is obtained: Q1-AL=Q0, kcal/h This heat is obtained from a low temperature heat source, and this heat cannot be obtained without a heat pump device. Therefore, using a heat pump device can save fuel and use waste heat.
The working cycle of a heating and cooling heat pump is exactly the opposite of that of a thermal engine. A thermal engine uses the energy of a high-temperature heat source to generate mechanical work, while a heat pump transfers heat from a low-temperature heat source to a high-temperature object by consuming mechanical work.
If the heat pump and the heat engine have two identical heat source temperatures, the thermal efficiency of the heat engine cycle is η=AL/Q1; the energy index of the thermal engine cycle – the heat conversion coefficient φ=Q1/AL, i.e. φ=1/η. The value of η is always less than 1, so the value of φ is greater than 1.
If the refrigerator and the heat pump have two identical heat source temperatures, the relationship between them is φ=Q1/AL=(Q0+AL)/AL=e+1, where η is the refrigerator's cooling coefficient. It can be seen that the minimum value of the heat transfer coefficient φ η1 and in this limit case Q0 E0, that is, no heat is absorbed from the low temperature heat source.
Green simultaneous universal heat pump for heating and cooling
We offer not only advanced, energy-efficient heat pumps with advanced inverter technology, but also a complete solution for heating, cooling and hot water supply of residential buildings.
WiFi remote control
The heating and cooling heat pump can be controlled via Wi-Fi, allowing users to operate their heat pumps anytime, anywhere.
Three in one function mode
Hot water (DHW) + Heating and cooling.
Guangdong JNOD New Energy Technology Co., LTD. Focus on research and development of heat pumps and electric boilers, manufacturing and providing comprehensive energy saving solutions.
With the continuous improvement of social and economic level, my country's air energy industry has ushered in a period of rapid development, and the scope of application of Swimming Pool Heat Pump products is also expanding. With the advantages of safety, energy saving and constant temperature, Swimming Pool Heat Pump has gradually become a better choice for swimming pools, gymnasiums, bathing centers and other places to solve the problem of constant temperature heating.
How does the Swimming Pool Heat Pump work?
What are the features of Swimming Pool Heat Pump?
Why choose the right Swimming Pool Heat Pump?
How does the Swimming Pool Heat Pump work?
Swimming Pool Heat Pump is a new type of high-efficiency energy-saving constant temperature heating equipment. It is a device that uses a small amount of electricity to drive heat from a low-temperature heat source to a high-temperature heat source based on the basic principle of reversed Carnot cycle. During operation, 1 part of energy is consumed, and 4 parts of energy (heat) are absorbed and transferred from the ambient air to the water, which saves 3/4 of the electricity compared to the water heater.
What are the features of Swimming Pool Heat Pump?
1. Swimming Pool Heat Pump, using advanced titanium alloy heat exchanger, has strong internal corrosion and can resist the erosion of chloride ions in water.
2. Swimming Pool Heat Pump is flexible in design and easy to install: integral design, beautiful and compact unit, small installation area.
3. The Swimming Pool Heat Pump project is easy to install, and the operation and maintenance costs are low.
4. The energy efficiency ratio of Swimming Pool Heat Pump is as high as 5.0, leading the industry.
5. Swimming Pool Heat Pump, using international environmentally friendly refrigerants (R410A/R417A), energy saving and environmental protection, no pollution to the environment.
6.Swimming Pool Heat Pump, super quiet, provide comfortable temperature.
Why choose the right Swimming Pool Heat Pump?
From "heating is too slow", "heating can't keep up with heat dissipation, the constant temperature feeling is useless", and even "the equipment uses electricity and does not dare to open it often", these problems may be caused by the wrong selection of Swimming Pool Heat Pumps. Therefore, when choosing a suitable Swimming Pool Heat Pump for a swimming pool, we must scientifically evaluate the required heating capacity of the swimming pool in the two stages of initial heating and constant temperature, and choose the one with greater demand as the basis for matching selection.
Under normal circumstances, the heating amount in the initial heating stage of the swimming pool will be higher than that in the constant temperature stage. Therefore, the first step in the selection of Swimming Pool Heat Pump is to understand the heating capacity required for the initial heating of the swimming pool.
JNOD has a complete heat pump industry chain, and its products involve Swimming Pool Heat Pump, House Heating & Cooling Heat Pump, Domestic Hot Water Heat Pump, Heat Pump Dehumidifier, Commercial & Industrial High Temperature Water Heating Solution, Industrial and Agricultural Heat Pump Dryer, etc.
Compared with the traditional swimming pool heating method, the biggest advantage of Swimming Pool Heat Pump is that it can effectively improve the heating speed and constant temperature of the swimming pool, making the swimming pool water heating safer, more energy-saving and faster, so as to meet the different heating temperature requirements of the swimming pool.
Is the Swimming Pool Heat Pump safe to use?
What are the application advantages of Swimming Pool Heat Pump?
What are the benefits for consumers of the application of Swimming Pool Heat Pump?
Swimming Pool Heat Pump relies on the "reverse Carnot" principle to work, using clean and renewable raw materials (air energy + electricity) as energy, neither generating harmful gases to the human body nor causing pollution to the atmosphere. With only a small amount of electricity input, a large amount of heating benefits can be obtained, providing a 24-hour constant temperature for the swimming pool.
From the perspective of energy saving and safety, Swimming Pool Heat Pump is an ideal choice for indoor swimming pool heating equipment. It is powerful, stable and efficient. It adopts high-efficiency titanium bubble heat exchanger, which has high efficiency, corrosion resistance and ultra-high energy efficiency. Refrigeration accessories, high operating efficiency and energy saving. And it is safe and reliable, water and electricity are completely separated; it can also intelligently control, realize independent temperature control, intelligent defrosting, etc. It is widely used in various swimming pools, hotel swimming pools, SPA, hot springs, bubble pools, etc., and it is easy to use.
Swimming Pool Heat Pumpdoes not discharge any pollutants during operation, and there are no safety hazards such as fire, explosion, poisoning, etc., which is very safe and environmentally friendly. As a professional swimming pool constant temperature equipment, Tongyi Air Energy swimming pool special constant temperature heat pump is equipped with a triple disinfection filter protection system, which can automatically complete disinfection, adjust pH value, and collect tiny dirt and suspended particles (such as dandruff, dust, etc. in swimming pool water) ), hair and other pollutants, not only to ensure the cleanliness of the swimming pool water, but also to protect the normal operation of subsequent equipment, effectively reducing the workload of the staff. For swimming pool operators, Swimming Pool Heat Pump saves more than 65% of operating costs compared to hot water equipment using other energy sources, and the unit is fully automatic and intelligent, which greatly reduces labor costs.
The Swimming Pool Heat Pump keeps the indoor heated swimming pool at a constant temperature of 26-28 degrees. Normal swimming pools use cold water. Due to the low water temperature (0-10 degrees in winter, 10-20 degrees in summer), not many people can swim in cold water, especially children, the possibility of catching a cold is very high. The constant temperature swimming pool is heated by heating equipment and maintains a temperature of 26-28 degrees throughout the year, which is suitable for the human body and allows you to say goodbye to the risk of swimming colds.
Guangdong JNOD New Energy Technology Co., LTD. focuses on heat pump& electric boiler R&D, manufacturing and providing comprehensive energy-saving solutions.
The heating and cooling heat pump is a highly efficient, energy-saving device that makes full use of inferior thermal energy. Heat can be transferred spontaneously from a hot object to a cold object, but not spontaneously in the opposite direction.
How does the heating and cooling heat pump work?
What does the operating time of the heating and cooling heat pump have to do?
What is the function of the heating and cooling heat pump?
In the heating and cooling circuit of the heat pump, the heat Q0kcal/h is obtained from the low temperature heat source (outside air or circulating water whose temperature is higher than the evaporation temperature t0) and the mechanical work ALkcal/h is consumed, while the heat of Q0kcal/h is obtained from the low temperature heat source (outside air or circulating water whose temperature is higher than the evaporation temperature t0) and the mechanical work ALkcal/h is consumed. The heating system) provides the heat of Q1kcal/h, and the relationship between these heats corresponds to the first main law of thermodynamics, ie Q1=Q0+ALkcal/h
If the heating and cooling heat pump is not used and the heat is converted by mechanical work (or the high temperature heat source is heated directly by electrical energy, the heat obtained is ALkcal/h, and after the heat pump device is used, the high temperature heat source (heating system) receives more heat is obtained: Q1-AL=Q0, kcal/h This heat is obtained from a low temperature heat source, and this heat cannot be obtained without a heat pump device. Therefore, using a heat pump device can save fuel and use waste heat.
The working cycle of a heating and cooling heat pump is exactly the opposite of that of a thermal engine. A thermal engine uses the energy of a high-temperature heat source to generate mechanical work, while a heat pump transfers heat from a low-temperature heat source to a high-temperature object by consuming mechanical work.
If the heat pump and the heat engine have two identical heat source temperatures, the thermal efficiency of the heat engine cycle is η=AL/Q1; the energy index of the thermal engine cycle – the heat conversion coefficient φ=Q1/AL, i.e. φ=1/η. The value of η is always less than 1, so the value of φ is greater than 1.
If the refrigerator and the heat pump have two identical heat source temperatures, the relationship between them is φ=Q1/AL=(Q0+AL)/AL=e+1, where η is the refrigerator's cooling coefficient. It can be seen that the minimum value of the heat transfer coefficient φ η1 and in this limit case Q0 E0, that is, no heat is absorbed from the low temperature heat source.
Green simultaneous universal heat pump for heating and cooling
We offer not only advanced, energy-efficient heat pumps with advanced inverter technology, but also a complete solution for heating, cooling and hot water supply of residential buildings.
WiFi remote control
The heating and cooling heat pump can be controlled via Wi-Fi, allowing users to operate their heat pumps anytime, anywhere.
Three in one function mode
Hot water (DHW) + Heating and cooling.
Guangdong JNOD New Energy Technology Co., LTD. Focus on research and development of heat pumps and electric boilers, manufacturing and providing comprehensive energy saving solutions.
Air heat pump water heater has low energy consumption (power consumption saves more than 2/3 compared to conventional electric water heaters), high thermal efficiency (heating speed is four times higher than conventional electric water heaters), Environmental protection and energy saving (reduces more than 2/3 compared to conventional electric water heaters) carbon dioxide emissions).
What are the differences between heat pump water heaters and air conditioners?
Why do heat pump water heaters improve the consumer experience?
What is the working process of the heat pump water heater?
The operating mode of the heat pump water heater is very different from that of the air conditioner, which determines the difference in the design concept between the heat pump compressor and the air conditioner compressor. Trouble-free, long-term stable operation of heat pump water heaters Compared to air conditioning systems, there is a big difference in the operating time. The operating time of heat pump water heater systems is much longer than that of air conditioning systems. The operating time of a heat pump water heater depends on the following factors: Air conditioning systems are often used in summer, but water heaters are mass-produced and run particularly long in winter. The time for heating a water tank in winter is several times as long as in summer, so it is necessary to confirm the operating mode of the heat pump water heater in winter.
According to statistical calculations, 2/3 of the service life of the heat pump water heater is consumed in winter. Since the water outlet temperature of the heat pump is over 55°C, the temperature of the water tank decreases when using. The liquefaction temperature is the main factor affecting the service life of the compressor. Under the condition of simultaneous operation, the total load of the compressor in the heat pump water heater is much higher than that of the compressor in the air conditioning system. The main motivation for consumers to buy water heaters with heat pump is energy saving and comfort. Consumers will thus consume more water, which also extends the working time of the heat pump. If the heat pump water heater is used for heating and service water applications, it can run for a long time during the heating period. From the combination of the above factors, it is evident that the main motor of the heat pump water heater will develop in the direction of miniaturization, and the actual operating time will be greatly extended.
A water heater with compression heat pump mainly consists of evaporator, compressor, condenser and expansion valve. Thermal Circular Process Throttling → Re-evaporation, whereby heat from the environment is transferred to the water.
Guangdong JNOD New Power Technology Co., LTD. sales team has extensive experience in overseas markets. We provide sincere and professional services, including OEM/ODM/project services, technology support, market analysis, use of design and assembly of installation. We have provided marketing consulting services and business solutions to customers from over 40 countries.
There are 2 different ways an air source heat pump can provide heat in your home: by heating the air in the rooms or by heating the water in the central heating system, but which option is best for your home? We've compared these different heat pumps, to help you find out.
As the name suggests, air-to-water heat pumps use the ambient air outside of a property to heat the water in the central heating system. They are the more frequently seen air source heat pumps on the market, and come with several benefits and disadvantages.
Benefits of an air-to-water heat pump
Air-to-water heat pumps come with several benefits when compared to air-to-air heat pumps.
Compatible with traditional central heating systems
According to the English Housing Survey 2019-2020, 90% of households in the UK have central heating with radiators as their main heat source. That means, unless you're among the select few, you are going to want an air source heat pump that's compatible with your existing central heating system. Air-to-water heat pumps are designed with this very purpose in mind. Air-to-air heat pumps are not compatible.
Easier to install
As the air-to-water heat pumps will generally connect directly to the central heating system they are usually a lot easier to install than air-to-air heat pumps. Installing an air-to-water heat pump in a property with existing central heating is similar to replacing a boiler, whereas installing an air-to-air heat pump would require the installation of air ducts throughout the property.
Not just for heating
Although air source heat pumps are mainly considered for heating properties, that isn't the only thing they do. Air-to-water heat pumps will heat the water in your property for your central heating, but can also be combined with a hot water storage tank to provide hot running water too.
Disadvantages of an air-to-water heat pump
Air-to-water heat pumps don't just come with benefits, there are some disadvantages too.
More expensive
Air-to-water heat pumps are not cheap. Depending on the size of the unit you need and which manufacturer you pick, you could end up paying more than £10,000 for an air-to-water heat pump, excluding the cost of installation.
In comparison, you can get some air-to-air heat pumps for less than £1,000. Even if the cost of installation is high, you could still spend less on getting an air-to-air heat pump installed than you would on just buying the parts for an air-to-water heat pump.
Requires more space
In addition to the space a hot water storage tank would take up to allow for hot running water, due to radiators being required, air-to-water heat pumps still take up more room in the property than air-to-air heat pumps do. This isn't much of a problem if you already have radiators installed, but to maximize space in a new property air to air heat pumps are the better option.
In what sounds like a much simpler process, air-to-air heat pumps extract heat from the ambient air outside of a property and transfer it to the air inside of a property. If you'd like more detail on how air source heat pumps work, have a look at the following article: What is an air source heat pump?
Benefits of an air-to-air heat pump
There are several benefits to having an air-to-air heat pump rather than an air-to-water heat pump.
Heat and cool
As the air to air heat pumps is essentially air conditioning units that are capable of heating a property, they can also be used to cool a property when the weather is hot. Many manufacturers refer to them as climate control solutions because they aren't just for heating a property, they can cool it too.
Save space
Air-to-air heat pumps may require the installation of air ducts throughout the property, but once they have been installed, each room will feel more spacious. This is because there is no need for radiators which take up wall room and floor space. For newer, less spacious properties, air-to-air heat pumps could help you make the most of your space.
Less expensive
As mentioned earlier, air-to-air heat pump units are considerably cheaper than their air-to-water counterparts. Some air-to-water units can be 10 times more expensive than an air-to-air unit, which is something to think about.
Disadvantages of an air-to-air heat pump
Air-to-air heat pumps don't just come with benefits when compared to air-to-water heat pumps, there are some disadvantages too.
Not compatible with traditional central heating systems
If you have an existing central heating system and want to replace a gas boiler with an air-source heat pump, air-to-air heat pumps are not for you. As they only heat the air in a property, they cannot be connected to the central heating system and are completely incompatible.
Higher installation costs
Although like-for-like installation costs for both types of heat pump are generally quite similar, unless you have a property with existing air conditioning ducting, the cost of installing an air-to-air heat pump is likely to be higher as there will be more work to do.
No hot water
Air-to-air heat pumps do not heat the water in a property. This means you will need a secondary source of heat to provide hot running water throughout your home. While this is possible through solar power and other water heating solutions, it is still a separate cost that is avoided when installing an air-to-water heat pump.
Having learned the advantages and disadvantages of these air source heat pumps, you should now be able to make a decision on which would be best suited to your circumstances. However, as there is a lot to consider when getting an air source heat pump installed, we would recommend seeking the advice of a local heating engineer. They can ensure you get the right solution for your home's unique circumstances. Fortunately, we can help you find qualified engineers in your area, who will provide you with free, no-obligation quotes.
Heat pump water heater is a new type of water heater. It converts air energy into heat energy through a heat pump to produce hot water. This water heater solves the disadvantage that solar energy cannot be used on rainy days. In addition, this water heater is more efficient compared to gas water heaters and electric water heaters. Environmental protection when you choose this water heater is a very good choice.
What is the main reason why air heat pump water heaters are popular in the market?
What is the workflow of a heat pump water heater?
What do you know about heat pump water heaters that can be used in hotels?
Air Source Water Heater is a new type of low carbon and environmentally friendly water heater. The operating cost of heat pump water heaters is only 1/4 of the cost of electric water heaters, which is very energy-saving and efficient. Originally, as a fourth-generation air water heater, its greatest feature is safety and money-saving! The operating costs of the air water heater are only 1/4 of the electric water heater, 1/6 of the gas water heater, 1/2 of the solar water heater, 2/3 of the fuel water heater and 3/5 of the gas heating system. The device absorbs the heat in the air to heat the cold water, and the cool air released does not pollute the environment and completely eliminates the safety risks such as flammability, explosion, electric shock and gas poisoning of ordinary water heaters.
1. The compressor compresses the low pressure refrigerant flowing back and converts it into a gas with high temperature and high pressure for discharge.
2. The high temperature and high pressure refrigerant gas flows through the copper pipe wrapped around the outside of the water tank, and the heat is passed through the copper pipe into the water tank. The cooled refrigerant becomes liquid under constant pressure and enters the evaporator after passing the expansion valve.
3. As the pressure of the evaporator is suddenly reduced, the liquid refrigerant is quickly evaporated into a gaseous state and absorbs a large amount of heat.
4. At the same time, under the action of the fan, a large amount of air flows through the outer surface of the evaporator, the energy in the air is absorbed by the evaporator, the air temperature drops quickly, and cold air is released and released.
5. The refrigerant that has absorbed a certain amount of energy is then returned to the compressor and enters the next circuit.
JNOD hot water heat pumps provide a highly efficient means of heating hot water for commercial and industrial applications. An average COP of 4.2 means that the energy efficiency is more than four times higher than that of conventional water heaters. It removes heat energy from the ambient air. This means savings of 60.75% of energy costs compared to electric water heaters.
Guangdong JNOD New Energy Technology Co., LTD. Provides marketing consulting services and business solutions to customers from over 40 countries. Customized solution for hot water supply based on the customer's market demand.
During the working process of the heat pump water heater, it consumes 1-part electricity to get the compressor running, and at the same time, it can absorb about 4-part heat from the ambient air and transfer it to the water. Therefore, air energy water heaters can save almost 3/4 electricity compared to electric water heaters. That is, the electric water heater consumes 4 kWh electricity to produce hot water, and the air energy water heater requires only 1 kWh electricity.
What role does the refrigerant play in the unit composition of the heat pump water heater?
What is the physical principle of how a heat pump water heater works?
What is the significance of the appearance of heat pump water heaters?
The heat pump unit contains a special heat-absorbing refrigerant. In the liquefied state, the normal temperature is below minus 20°C. Therefore, there is a temperature difference between it and the outside temperature. The refrigerant absorbs the outside temperature and is stored in the evaporator. Generate pressure and evaporate and evaporate, and through the work of the heat exchanger (heat pump), when the refrigerant is transferred from the evaporated state to the liquefied state, the objectively existing heat is released to the storage water in the water tank.
The heat pump water heateruses the heat absorbing medium (refrigerant) in the device to collect heat energy from the air or the natural environment, heats the cold water quickly through the heat exchanger and at the same time releases the cold air, avoiding the lack that conventional solar products can not work in rainy weather and at night. As long as the outside temperature is above 1-15 degrees, it can work normally, so can be more efficient and energy-saving, at the same time does not occupy open space, and is easy to install and flexible to use.
With the rapid development of the economy and the improvement of people's living standards, water heating has become a necessity for people's lives. However, conventional electric water heaters have the disadvantages of large energy consumption, high cost and serious environmental pollution; while the operation of energy-saving and environmentally friendly solar water heaters is also restricted due to weather conditions. The heating principle of the air heat pump is different from that of the conventional solar water heater. The air heat pump uses air, water, solar energy, etc. as a low temperature heat source, and the air heat pump uses the electrical energy as energy to absorb heat from the low temperature side to heat the service water.
Guangdong JNOD New Energy Technology Co., LTD. can provide product certification requirements for local markets; provision of catalogues, technical manuals; exhibit together with customers at leading industrial fairs; Advertise in local market media through our press release resources.
Heating and cooling heat pump is a device that transfers thermal energy from a low temperature heat source to a high temperature heat source. for cooling and heating. The low-temperature heat sources usually used in heat pump installations are the media around us - air, river water, sea water, urban sewage, surface water, groundwater, reclaimed water, fire pools, or the working fluid discharged from industrial production equipment, these working fluids Often has a similar temperature to the surrounding medium.
How does the heating and cooling heat pump work?
Compared with ordinary central air conditioning refrigeration and gas wall-hung boiler heating, why does heating and cooling heat pump feel better?
What are the installation precautions for heating and cooling heat pump?
Water flows from high to low, and heat is transferred from high-temperature objects to low-temperature objects, which is a natural law. However, in real life, for the needs of agricultural irrigation, domestic water, etc., people use water pumps to send water from low places to high places. Similarly, in today's increasingly tense energy environment, in order to recover the heat in the low-temperature hot gas usually discharged into the atmosphere, the low-temperature hot water discharged into the river, etc., the heating and cooling heat pump is used to transfer the heat energy from the low-temperature objects to the high-temperature objects. Then the high temperature object is used to heat water or heating, so that the heat can be fully utilized. The working principle of the heat pump system is consistent with the working principle of the refrigeration system.
Heating and cooling heat pump has an additional heat exchange procedure in the cycle process, and the temperature difference of the system heat exchange is smaller (the air temperature of the fan coil unit in summer is 15℃-20℃, and the air temperature of the fan coil unit in winter is about 32℃) , the wind blowing out is softer, it will not take too much moisture, and the comfort is much better.
The installation location of the heating and cooling heat pump is a problem. Many people look at the installation example and think that the heat pump host with a water tank takes up too much space. The installation of the elevator apartment has to occupy a large living balcony or kitchen space. In fact, the air energy heat pump is also related to the power Related, the equipment of a large apartment is very large, and the equipment of a small apartment will be very small, and it can even be installed on an ordinary central air-conditioning unit.
Guangdong JNOD New Energy Technology Co., LTD. can provide product certification requirements for local markets; provide catalogs, technical manuals; co-exhibit with the clients in leading industry exhibitions; do promotion on the local market's media by our news release resources.