











Heating and Cooling Heat Pump uses scientific methods to make low-temperature heat energy flow to high-temperature heat energy according to the "inverse Carnot principle", and obtains more heat energy from the air, which has wide adaptability.
How does the Heating and Cooling Heat Pump cycle for cooling and heating?
What is the principle of Heating and Cooling Heat Pump?
Can the Heating and Cooling Heat Pump still operate at an ambient temperature of 0°C?
During heating, the refrigerant (environmentally friendly refrigerant) in the Heating and Cooling Heat Pump host will absorb the low-temperature heat energy in the air through the evaporator, and then convert it into high-temperature heat energy through the compressor, and then transfer the heat energy to the heating circulating water through the heat exchanger. Finally, the heated hot water is transported to the indoor heating terminal for heat dissipation through the water pump, and then returned to the heat exchanger for heating after the heat dissipation, and the process is repeated.
During cooling, the cycle of the Heating and Cooling Heat Pump system is just the opposite, absorbing the indoor heat and transferring it to the outdoors. Air heat exchange, an additional heat exchange program.
Shallow water sources on the earth's surface (generally within 1000 meters), such as groundwater, surface rivers, lakes and oceans, absorb considerable radiant energy from the sun into the earth, and the temperature of water sources is generally very stable. The working principle of Heating and Cooling Heat Pump is to realize the transfer of low-temperature heat to high-temperature by inputting a small amount of high-grade energy (such as electric energy). The water body is used as the heat source of heat pump heating in winter and the cold source of air conditioning in summer, that is, the heat in the building is "taken out" and released into the water body in summer. Because the water source temperature is low, it can efficiently take away the heat, so as to achieve the purpose of indoor cooling of the building in summer; In winter, heat energy is "extracted" from the water source and sent to the building for heating through Heating and Cooling Heat Pump.
The answer is yes, although Heating and Cooling Heat Pumpproducts were mostly used in high temperature areas in the early days, with the continuous development of heat pump technology, air energy heat pump heating can be used in most areas, especially for some low temperature environments. The Heating and Cooling Heat Pump uses technologies such as jet enthalpy to ensure that the Heating and Cooling Heat Pump can operate normally in severe cold climates.
Guangdong JNOD New Energy Technology Co., LTD. has been committed to providing customers with Heating and Cooling Heat Pumps and perfect after-sales service so that customers can invest easily, use them with confidence, and have no worries.
The basic principle and characteristics of Swimming Pool Heat Pump. It is based on the basic principle of the reversed Carnot cycle, using a small amount of electricity to drive a device that transfers heat from a low-temperature heat source to a high-temperature heat source.
What are the advantages of Swimming Pool Heat Pump?
What is the current development trend for Swimming Pool Heat Pump?
What is the working physics of the Swimming Pool Heat Pump?
1. The water temperature of the Swimming Pool Heat Pump can be set freely, and the scope of application is wider, and it can be flexibly applied to various engineering needs.
2. Swimming Pool Heat Pump uses Copeland scroll compressor, which has high efficiency, low vibration, convenient maintenance and low operational risk.
3. Swimming Pool Heat Pump has a wide operating temperature range and is more reliable in application.
4. Swimming Pool Heat Pump adopts the parallel design of compressors, which makes the operation more stable and the failure rate is lower. Even if one of them fails, the unit can still operate, reducing operational risks.
5. Swimming Pool Heat Pump meets all-around application, with cooling, heating and hot water functions.
In the competition and iteration of many heating methods, Swimming Pool Heat Pump has become the mainstream choice of swimming pool business in recent years with the characteristics of clean energy and high energy efficiency. In the past, the Swimming Pool Heat Pump was limited by technology, and as the temperature dropped, its heat pump performance also declined. Facing the requirement of constant temperature swimming pools to operate in four seasons, energy saving and high efficiency, the industry rookie frequency conversion Swimming Pool Heat Pump subversively refreshes the annual energy efficiency performance of Swimming Pool Heat Pump, stunning the market.
Swimming Pool Heat Pump is a high-quality product specially developed for indoor swimming pools. It integrates air conditioning, dehumidification, pool water heating, heat energy recovery, and fresh air treatment. It recovers and comprehensively utilizes energy in a large amount, and overcomes many problems such as high humidity and high chlorine environment. The change of different operation modes in spring, summer, autumn and winter achieves efficient and energy-saving operation.
Swimming Pool Heat Pump can fully control indoor relative humidity at 50~75%, air temperature at 27~30℃, water temperature at 26~40℃, and advanced intelligent ventilation control to maintain a high-quality indoor comfortable environment. Widely used in dry swimming pools, hot spring resorts, hotels, clubs, other fields, factories, schools and other fields that require dehumidification and constant temperature.
The working principle of Swimming Pool Heat Pump is to recycle the evaporative heat loss on the surface of the pool water, transfer it into the pool water and air, make up for the heat loss of the pool water and air, and realize the function of air conditioning and dehumidification at the same time.
Guangdong JNOD New Energy Technology Co., LTD. has various Swimming Pool Heat Pumps that can provide the best quality, and make people feel more comfortable, reliable, and consistent.
Hello everyone, We sincerely invite you to watch our live stream shows on Alibaba in 15th, April.
We will show you our hottest and newest electric boiler and heat pump during the live show.
Some latest market information about the boiler and heat pump products would be shared either.
If you don't want to miss our new arrivals, cost-effective and hot selling products, or have anything you want to communicate with us, welcome to meet us:
Link: https://www.alibaba.com/live/get-the-hottest-trending-electric-boiler_94691c7f-cc7a-4215-a000-2810192b9712.html?referrer=SellerCopy
Here's the link to watch our show:
DATE: April 15th ,2022
Time: 21:00-23:00PM
With the soaring price of gas and the emphasis on environmental protection in many countries around the world, heat pumps are becoming more and more important and popular among consumers and manufacturers. In the last 2 years, many various kinds of heat pumps have appeared on the market. In this article, we will teach you how to choose a good hybrid hot water heat pump, also called all in one heat pump water heater.
For a hot water heat pump, the water tank is very important, both the outcase and the interior are very important.
* Internal
At this point, we would recommend our customers to choose a hot water heat pump with an enameled water tank for the following reasons.
A. Good thermal insulation: Take JNOD's all in one heat pump with enameled tank as an example. After testing, when the water in the tank is boiled to the set temperature and then power off, the water in the tank will only have a temperature drop of 5-8 degrees Celsius after 24 hours. Such a hybrid heat pump is your wise choice.
B. Strong corrosion resistance: In areas with bad water quality, there are more impurities in the water. If you use the general iron water tank, the welding joints inside are prone to chemical reaction with impurities, which leads to the problem of water leakage.
* Outcase
Here we recommend that consumers choose galvanized steel plate as the shell material. There are businesses in the market will choose color plate. The service life of the color plate is very short, only 1-2 years. A long time inside the box exposed will also lead to water leakage problems in the tank.
Expect these suggestions will let you choose a better heat pump! Feel free to contact JNOD with any questions! Link:https://www.jnodheatpump.com
So, what is a heat pump?
A heat pump is part of a home heating and cooling system and is installed outside your home. Like an air conditioner such as central air, it can cool your home, but it’s also capable of providing heat. In cooler months, a heat pump pulls heat from the cold outdoor air and transfers it indoors, and in warmer months, it pulls heat out of indoor air to cool your home. They are powered by electricity and transfer heat using refrigerant to provide comfort all year round. Because they handle both cooling and heating, homeowners may not need to install separate systems to heat their homes. In colder climates, an electric heat strip can be added to the indoor fan coil for additional capabilities. Heat pumps do not burn fossil fuel like furnaces do, making them more environmentally friendly.
Also with water tank inside, it can provide DHW for your kitchen and bathroom.
To achieve heating for our house, there are total three kinds of heat pump we manufacture for our customer. They are:
1. Swimming pool heat pump;
2. Hot water heat pump;
3. Multi function heat pump (heating, cooling & DHW)
Homeowners in need of a new heating or cooling system, may consider the type of climate they live in before purchasing a heat pump system. Heat pumps are more common in milder climates, where the temperature does not typically drop below freezing. In colder regions, they can also be combined with EVI system for energy-efficient heating on all but the coldest days.
JNOD are using R134a, R410a, R32 & R290 on our heat pump products. We have range from 10kw to 32kw. Product type are with monoblock & split.
Learn more about our products on website: https://www.jnodheatpump.com
October 1st is China's National Day. Every year of our National Day, public places wil1 hang lanterns or banners with "celebrate the National Day slogan to celebrate The square is placed on the slogan words bonsai and balloons, with a happy atmosphere to meet the National Day.
Chinese people have enjoyed a long holiday starting from every year's Oct. 1st. This one-week period is also called "golden week" . it is the biggest week for tourism in China when people have a week off to reunite with families and take trips in the past years. This makes it the second-largest holiday period in China.
JNOD staff will enjoy a 5-day break during Oct.1st to 5th. Although we are on holidays, please send us your inquiry when you are in need. JNOD professional sales team offer service anytime. If there’ s a slight delay in response during the holiday, hope for your kind understanding.
Heating and Cooling Heat Pump is a central air-conditioning unit that uses air as a cooling (heat) source and water as a circulating medium to transfer energy. Its advantages are that it is easy to install and use, and it can be used after connecting to the power supply, saving a complex cooling water system and a boiler heating system.
Compared with other products of the same type, why is Heating and Cooling Heat Pump cost-effective?
What are the common Heating and Cooling Heat Pumps on the market?
What to look for when choosing a Heating and Cooling Heat Pump?
Compared with electric boilers, Heating and Cooling Heat Pump can save more than 50% of power consumption, and reduce the trouble of frequent replacement of electric heating tubes; Compared with traditional coal boilers and oil-fired boilers, Heating and Cooling Heat Pump is pollution-free, emission-free, and safe , eliminating the need for annual routine security inspections, eliminating the need for professional boiler workers, fully automatic temperature control, and significantly reducing operating costs by more than 50%. Heating and Cooling Heat Pump completes a heat pump for heating and cooling needs in a particular field. Generally speaking, Heating and Cooling Heat Pump uses specialized heat pump compressors, special refrigerants and systems.
There are many types of heat pump water heaters on the market, mainly including three series of solar boost type, water source and air source. Solar-assisted heat pump is a heat pump technology that combines heat pump and solar energy technology; water source heat pump uses a certain temperature water source (above 20 ℃) as a heat source and uses refrigerant as a medium to absorb the heat in the water source and then compress it by a compressor. For heating, exchange heat with cold water through a heat exchanger to achieve the purpose of heating and producing hot water. The water source heat pump must have a water source with a certain temperature and flow; the air source heat pump obtains heat from the air in a similar way to the water source heat pump to heat water. Among the three types of heat pumps, the air source heat pump is subject to the least restriction and has the largest development space.
Whether the Heating and Cooling Heat Pump saves electricity has a lot to do with outdoor temperature, building insulation, user usage, equipment purchase and installation. If you want to save more electricity, users not only need to carefully select air source products, such as buying big brands as much as possible, finding professionally qualified installers for installation, etc., but also mastering the correct air source heat pump heating method, in order to achieve high efficiency and energy saving.
Guangdong JNOD New Energy Technology Co., LTD. has various Heating and Cooling Heat Pumps that can provide the increasing of products, and make them more effective, reliable, and consistent.
Interclima is coming~
Interclima is the living history of all stakeholders in the sector HVAC in building: manufacturers, distributors, installers, consultants and project managers, maintenance and operating companies, contractors … As part of the Mondial du Bâtiment, it also shines internationally. The technology and equipment of renewable energy , the quality of indoor air nd ventilation, heating and hot water.
The INTERCLIMA 2022 will take place on 4 days from Monday, 03. October to Thursday, 06. October in Paris. The JNOD team is exhibiting with our latest boiler, Heat pump products, booth number is Pav.3-E111, welcome to visit us to discover our new products.
· From Monday 3 to Thursday 6 October 2022
· Venue: Paris Porte de Versailles (VIPARIS)
· City: Paris
· Booth Number: Pav.3-E111