Inground Swimming Pool Heat Pump- China Manufacturers Factory Suppliers

More and more people choose heat pump water heatersbecause air energy is the most energy-efficient, that is, the lowest operating cost, compared to most water heaters that consume electricity and gas.

How does the heat pump water heater achieve the effect of saving energy?

What should we pay attention to when using heat pump water heater?

What are the operational advantages of heat pump water heaters?

How does the heat pump water heater achieve the effect of saving energy?

When the heat pump water heater is working, the energy QA stored in the ambient medium is absorbed in the evaporator; it consumes a part of the energy itself, that is, the compressor consumes power QB; the heat release QC is carried out in the condenser through the working fluid circulation system, QC=QA+QB, it can be seen that the energy output by the heat pump is the work QB done by the compressor and the heat QA absorbed by the heat pump from the environment; therefore, the use of heat pump technology can save a lot of electric energy.

What should we pay attention to when using heat pump water heater?

temperature, water consumption

Put the bath water in the heat pump water heater. The most suitable water temperature is 42°C. It can be slightly higher by 1-2°C for middle-aged and elderly people. The water for showering is about 40~50 liters per person. Bathtubs and Jacuzzis are determined by capacity.

How much hot water can be made

In terms of product performance and theory, the heat pump water heater can be cycled back and forth to continuously produce hot water. Under normal temperature, the hot water can be produced per hour as follows (45℃-55℃): It depends on the size of the unit.

What are the operational advantages of heat pump water heaters?

The heat pump water heater absorbs the low-temperature heat in the air, vaporizes it through the fluorine medium, and then compresses it through the compressor to heat up and pressurize it. The air energy water heater has the characteristics of high efficiency and energy saving. The same amount of hot water produced is 4-6 times that of the electric water heater. Its annual average thermal efficiency ratio is 4 times that of the electric heating, and the energy efficiency is high.

The heat pump water heater overcomes the shortcomings of solar water heaters that rely on sunlight for heating and inconvenient installation. Since the work of the air energy water heater is to exchange heat through the medium, it does not need the electric heating element to be in direct contact with the water, which avoids the danger of electric water heater leakage, and also prevents the gas water heater from the danger of explosion and poisoning, and more effectively controls the gas Air Pollution Caused by Exhaust Gases from Water Heaters.

Guangdong JNOD New Energy Technology Co., LTD. has focused on the field of heat pump water heaters for many years, it commits to providing perfect service for every customer in the world.

To celebrate 13th Anniversary of JNOD, we organized all of our staff to take a two-day-one-night travel to XiaChuan Island. Our staff,dressed up in customized dark blue clothes, departing with good spirit. We played games, sang songs on the bus. Three hours later after taking bus and boat, we arrived at the scenic spot.

The island has charming scenery. There are natural beaches with excellent sand quality, beautiful islands and bays, strange mountain scenery and stone forests, attractive scenic spots, dense primary secondary forests, animal and plant wonders and a complete variety of seafood treasures.

We have been serving our customers with spirit of hard working and good service for first 13 years. We wish JNOD will be even better and more prosperous in the next 10 years, 20 years and even more!

When the indoor swimming pool is used in winter, it is necessary to heat the pool water to make the water temperature reach 26-28 degrees, which requires a lot of thermal energy. Boilers, gas, and electricity are gradually eliminated due to their low thermal efficiency and environmental protection. More and more people will Option to use Swimming Pool Heat Pump. So in addition to environmental protection, what are the benefits of Swimming Pool Heat Pump?

Compared with traditional boilers, what are the advantages of Swimming Pool Heat Pump?

What advancements have the Swimming Pool Heat Pump made?

Why is the demand for Swimming Pool Heat Pump increasing?

Compared with traditional boilers, what are the advantages of Swimming Pool Heat Pump?

Compared with traditional boilers, Swimming Pool Heat Pump does not use any fuel such as coal, oil, gas, etc., and does not produce open flames and exhaust emissions. Therefore, the use of air source heat pumps not only protects the atmospheric environment, but also eliminates fire, explosion, poisoning, etc. Accident happens. Compared with ordinary electric water heaters, it consumes less power, avoids leakage accidents, saves energy and is environmentally friendly. Compared with solar water heaters, air energy heat pumps are not affected by weather, geography, climate and other factors when working Sunny can be used normally.

What advancements have the Swimming Pool Heat Pump made?

smart system

① The unit control system adopts intelligent control. When customers use it, they only need to set the air temperature, humidity, and pool water temperature, and then the equipment will enter the fully automatic operation state, and there is no need for special personnel to take care of it.

② Customers can learn air temperature, humidity and other data through the touch-type full-color screen. Real-time value of pool water temperature and operating status of equipment.

③ Customers can also choose a communication interface according to their needs to implement remote control, monitoring and connection with the system.

ventilation system

Customers can choose the intelligent ventilation system of Swimming Pool Heat Pump. After choosing this system, the unit will control the amount of fresh air entering the room according to the concentration of carbon dioxide in the room, which can greatly save the energy consumption during operation.

Why is the demand for Swimming Pool Heat Pump increasing?

Not only that, the advancement and development of sports equipment and facilities and equipment technology have also provided a foundation for more people to actively participate in fitness. Take swimming, the most popular sport, as an example. In the past, people swimming in open-air pools or public waters were easily limited by the temperature environment. If they accidentally caught a cold, it would be bad for their health, and microbial bacteria would grow in public waters. , the health situation is not optimistic. In recent years, with the advancement of Swimming Pool Heat Pump related supporting technical facilities, many swimming pools and other fitness places are equipped with heated swimming pools, and even schools, communities, villas, etc. are equipped with heated swimming pools, so that people can not only enjoy the hot summer. The fun of refreshing swimming can also have a comfortable swimming experience in the cold winter.

If you would like to receive more information about the Swimming Pool Heat Pump, please connect Guangdong JNOD New Energy Technology Co., LTD., and they will be happy to answer your question!

Swimming Pool Heat Pump is used to maintain the temperature of swimming pool water. Swimming Pool Heat Pump, because the indoor swimming pool generally maintains the water temperature at 26℃~28℃ and the air temperature at 28℃~30℃ (the air temperature is 1℃~2℃ higher than the water temperature).

What is the reason for the continued popularity of the Swimming Pool Heat Pump?

Why is Swimming Pool Heat Pump in demand?

What metrics should be considered for Swimming Pool Heat Pump?

What is the reason for the continued popularity of the Swimming Pool Heat Pump?

Not only swimming pools, but also from hotels to fitness clubs, heated swimming pools are becoming more and more indispensable, and the power consumption of constant temperature heating equipment has become one of the power consumption concerns of swimming pool owners, and its operating cost should not be underestimated.

Faced with the phenomenon that the market is in short supply, for many swimming pool owners who are eager to generate income, how to improve the energy efficiency utilization rate of the swimming pool constant temperature heat pump, ensure the efficient operation of the swimming pool in the low temperature climate, extend the popularity to the four seasons, and realize the full swimming pool. Annual business has become a key upgrade direction.

Why is Swimming Pool Heat Pump in demand?

Since the water temperature of indoor swimming pools is generally kept at 26°C~28°C, and the air temperature is kept at 28°C~30°C (the air temperature is 1°C~2°C higher than the water temperature), for lighting needs, the walls are mostly glass walls or glass structures. Because the pool water contains a lot of chlorine, with the continuous evaporation of the water in the pool, the air humidity is high, and the humid air causes a lot of condensation on the walls or glass, which is bound to cause strong corrosion to the interior decoration of the building. In addition, because humid air contains a large number of viruses, bacteria and other elements that reduce air quality, it can make it difficult for people to breathe, so indoor swimming pool temperature and humidity control are getting more and more attention. Swimming Pool Heat Pump has also attracted the attention of consumers.

What metrics should be considered for Swimming Pool Heat Pump?

Swimming Pool Heat Pump considers indoor air quality, and the constant temperature heat removal pump unit is equipped with fresh air treatment function and exhaust air function.

Swimming Pool Heat Pump considers the operating cost of the constant temperature heat removal pump unit. In the spring and autumn, a large amount of outdoor low-humidity fresh air can be used to adjust the humidity of the indoor air to reduce the operating cost.

In order to prevent the circulating air from affecting the service life of the equipment, the key components and sheet metal structure of the Swimming Pool Heat Pump are treated with anti-corrosion during the manufacturing process, and the compressor, power distribution cabinet and control system are isolated from the wind system.

After reading, do you have a deeper understanding of Swimming Pool Heat Pump? For further information, please contact Guangdong JNOD New Energy Technology Co., LTD.

The operating principle of heat pump water heaters is very similar to that of air conditioning systems. It consumes a small amount of electrical energy to get the compressor running. The working fluid is compressed by the compressor into a liquid state with high temperature and high pressure, and then enters the condenser to release heat to heat the water. By circulating and heating in this way, the water can be heated from 50°C to 65°C.

What are the main components of heat pump water heaters?

How does the heat pump water heater work?

Why should the heat pump water heater be green?

What are the main components of heat pump water heaters?

Four main components of refrigeration technology: evaporator, compressor, condenser and throttling device.

Three stable parts: liquid storage tank (compressor), expansion valve (capillary tube), dry filter (filtering water and impurities)

A large piece of defrosting: four-way valve

Break through traditional energy conversion theory to achieve high energy efficiency:

When operating the heat pump, the working medium in the evaporator can absorb the energy QA stored in the ambient medium;

And starting the system must consume energy, that is, the power consumption of the QB compressor;

At the same time, the heat emitted from the working medium to the high temperature medium in the condenser is QC;

After the compressor input work starts the system, the mechanical kinetic energy becomes thermal energy. The energy output of the heat pump is thus the sum of the work done by the compressor QB and the heat absorbed by the heat pump from the environment QA; Enter a QB to get QB+QA and break the traditional bottleneck that conversion between different energies cannot achieve full efficiency; Heat pump technology is more energy efficient.

How does the heat pump water heater work?

heat pump water heaters work according to the "reverse carnotic" principle, specifically the "outdoor unit" as a heat exchanger absorbs heat from the outside air, heats the low boiling working medium (refrigerant) and evaporates it, and the refrigerant vapor The water is compressed and heated by the compressor and enters the water tank, and the water in which the heat is released is condensed and liquefied and then throttled and pressurized to return to the outer heat exchanger to enter the next circuit. The heat pump water heater simply absorbs the heat in the air to heat the water, and the air that has absorbed the heat can also be used in the kitchen to solve the problem of stuffy heat.

Why should the heat pump water heater be green?

The heat pump water heater has energy saving functions.

The biggest advantage of the heat pump water heater is undoubtedly the energy saving. The low-temperature thermal energy in the air is converted into high-temperature thermal energy by the compressor. Based on the same amount of hot water generation, the energy saving is maximized compared to the water heater with electric heating, and the cost of use is only 1/4 of the cost of electric water heater. Compared to gas water heaters, it consumes no gas fuel and the cost of use is only 1/3 of the cost of gas water heaters. heat pump water heaters take air as the main body and save energy, which not only saves people's usage cost, but also corresponds to the main body of energy saving in the world. This is one of the biggest highlights of air energy water heaters.

Guangdong JNOD New Energy Technology Co., LTD. Focus on research and development of heat pumps and electric boilers, manufacturing and providing comprehensive energy saving solutions.

heating and cooling heat pump integrates air conditioning and heating systems, is comfortable and energy-saving, and will surely lead the market trend of comfortable home life in the future.

How exactly does the heating and cooling heat pump work?

What is the basic principle of heating and cooling heat pump?

Will the floor height affect the installation of the heating and cooling heat pump?

How exactly does the heating and cooling heat pump work?

The common heating and cooling heat pumps on the market are almost all of combined cooling and heating, which solves the problems of cooling in summer and heating in winter through a set of equipment. In some specific areas (the temperature is relatively high in winter), the air energy heat pump can also be connected to the domestic hot water tank to provide 24-hour uninterrupted hot water for the family, so the air energy heat pump can be used for cooling and heating, as well as cooling and heating. And with domestic hot water, but in order not to affect the heating effect, the domestic hot water is generally not combined.

What is the basic principle of heating and cooling heat pump?

Basic principle of heating and cooling heat pump: it is mainly composed of compressor, heat exchanger, axial fan, thermal insulation water tank, water pump, liquid storage tank, filter, electronic expansion valve and electronic automatic controller. After the power is turned on, the axial flow fan starts to operate. The outdoor air is heat exchanged through the evaporator. The air with reduced temperature is discharged from the system by the fan. At the same time, the working medium inside the evaporator is sucked into the compressor. The compressor compresses the low-pressure working medium gas into high-temperature and high-pressure gas and sends it to the condenser. The water forcibly circulated by the water pump also passes through the condenser and is heated by the working medium and sent to the user for use, The working medium is cooled into liquid, which flows into the evaporator again after throttling and cooling by the expansion valve. In this way, the heat energy in the air is continuously "pumped" into the water, so that the water temperature in the insulation water tank gradually rises to about 55 ℃, which is just suitable for people to take a bath. This is the basic working principle of heating and cooling heat pump.

Will the floor height affect the installation of the heating and cooling heat pump?

The floor height problem, many people think that the floor height of the elevator apartment is relatively low, and the installation of heating and cooling heat pump will cause the room to become depressed, but in fact, the installation of heating and cooling heat pump will not have much impact on the floor height. , The concealment of central air-conditioning can reduce the sense of oppression of the floor height through the reasonable planning of the ceiling, and the floor heating can also be laid by dry floor heating. The floor height is only increased by 3-4 cm, and the user cannot distinguish it with the naked eye.

Guangdong JNOD New Energy Technology Co., LTD. is the leading manufacturer sofa manufacturer specializing in heating and cooling heat pump. If you want to get more information, just go and connect them.

Mid-autumn Festival is a traditional festival in China, takes place annually on the 15th day of the eighth month in the Chinese calendar. This year, that day falls on September 10. To celebrate the holiday, families and friends gather to revel in festivities like feasting on mooncakes, playing with lanterns, and moon gazing, It’s also a time of giving thanks for a good harvest.

Most of people enjoy this special date for families or friends reunion, JNOD electric boilers and heat pumps will always be by your side, providing you warm and comfortable!

We also would like to take this opportunity to thank all our customers for their continued kind support, which has allowed JNOD to grow and become better and better.

Please kindly be advised that our company will be on vacation from 10 SEP to 12 SEP ,2022.

Our sales team and after-sales service team will always keep online and continuous service,

Let's keep in touch.

Guangdong JNOD New Energy Technology Co., LTD. focusing on heat pump& electric boiler R&D, manufacturing and providing comprehensive energy-saving solutions.

JNOD has a complete heat pump industry chain, and its products involves Swimming Pool Heat Pump, House Heating & Cooling Heat Pump, Domestic Hot Water Heat Pump, Heat Pump Dehumidifier, Commercial & Industrial High Temperature Water Heating Solution, Industrial and Agricultural Heat Pump Dryer,etc.The ultra-low temperature EVI heat pump has been widely used, too.

JNOD insisted on developing with technology innovation, it possessed of several national famous technicians and had invented multiply product patents. The company has been strictly implement the ISO international quality management system, and the products are of reliable guaranteed quality.

We are committed to providing customers the best hot water & heating solutions with our heat pump products, focusing on the latest technologies, strive for outstanding quality in our products and customer service.

Mr. Cool Universal Series DC Inverter Complete System High ESP Heat Pump, 4-5 Ton

2020-4-26 · On the journey to making our homes money savers and climate champions, water heating has always been a stumbling block. While there are easy ways to use hot water efficiently (like the low-flow ...

Household R32 Heating And Cooling Heat Pump Electric Water Heater 2.1KW~9.1KW …

Low Carbon Monoblock Heat Pump , Quiet Monoblock Heat Pump Contact Details Solareast Heat Pump Ltd. Contact Person: admin Tel: 8613727864674 Send your inquiry directly to us ( 0 / 3000) Other Products Free Standing 32KW Inverter Monoblock Heat Pump Boiler 380-415V With TUV Fully Inverter 9KW Air Source Monoblock Heat Pump TUV with lower carbon

Eco Swimming Pool Commercial Heat Pump. 1 8.2-34kw Rated Heating capacity2 with EVI,Electroic heater,water pump3 with Wifi controling4 Mitsubishi/ Panasonic Compressor5 Swep /Alfa Laval heat exchanger6 Four-way valve:Sanhua /Dunan7 R410A/R32 inverter. Inquire Add …

2020-8-28 · Heat pumps are used for outdoor pools and work by extracting heat from the air and converting this into heat for the pool through refrigeration technology. A heat exchanger then transfers this heat into the pool through the pool’s pump and filtration system, which helps to warm the pool equally throughout.

Find here Heat Pumps, Heat Pump Systems manufacturers, suppliers

JNOD Energy Wifi Monoblock Commercia Heating And Cooling Heat Pump. *WiFi Remote Control. The heating and cooling heat pump can be controlled by Wi-Fi, it release the users …