With the continuous improvement of living standards, there are more and more users of heating and central air conditioning. Central heating users do not need to worry about the choice of equipment, while household heating users need to face a dazzling array of hot and cold equipment, which is difficult to carry out. choose. Heating and Cooling Heat Pumps are constantly entering the public's field of vision, and are sought after by many users because of their environmental protection and energy-saving features. But what else should you know before choosing a Heating and Cooling Heat Pump?
How energy efficient is the Heating and Cooling Heat Pump?
How to save resources when cooling with Heating and Cooling Heat Pump?
How to save resources when heating with Heating and Cooling Heat Pump?
The Heating and Cooling Heat Pumpcan adjust the indoor temperature by absorbing the heat energy in the air and then transferring it to the water for heat exchange. In summer, it is cooled by fan coil unit, and in winter, it is heated by fan coil unit, floor heating or radiator. It has a dual-purpose function. Heating and Cooling Heat Pump can also be connected in areas with better environment. Domestic hot water, and even the water heater are saved.
Heating and Cooling Heat Pumprefrigeration is to cool the circulating water in the pipeline into chilled water through the heat pump unit. The outlet air temperature of the indoor fan coil is between 15°C and 20°C. The chilled water is circulated into the room for heat exchange, and the evaporator The heat absorption in the room transfers the heat in the room to the circulating water in the pipeline, and then the circulating water after the heat absorption is brought to the heat exchanger configured by the heat pump unit through the operation of the water pump for heat exchange, and finally the heat pump host discharges the heat to the air In the cycle, this process is repeated to achieve the effect of indoor cooling. However, it should be noted that after the circulating water in the pipeline is cooled by the Heating and Cooling Heat Pump, the temperature can be kept stable for a long time without heat exchange, and there is no short-term loss of cooling capacity. Energy consumption will also be lower.
Heating and Cooling Heat Pump heating is to replace the collected heat into the heating pipeline through the heat pump unit, and then deliver the water to the floor heating, fan coil and radiator at 35°C-45°C, 40°C-50°C and 55°C respectively. The heat is released in the middle, so as to achieve the effect of indoor heating. Because the air energy heat pump adopts frequency conversion technology and jet enthalpy increasing technology, it has a high energy efficiency ratio, and can obtain more than three times the heat energy from the low temperature environment, and the energy saving performance will be much higher than that of direct conversion of electric energy into heat energy.
After reading, do you have a deeper understanding of Heating and Cooling Heat Pump? For further information, please contact Guangdong JNOD New Energy Technology Co., LTD. They will be very pleased to help you!
The operating principle of heat pump water heaters is very similar to that of air conditioning systems. It consumes a small amount of electrical energy to get the compressor running. The working fluid is compressed by the compressor into a liquid state with high temperature and high pressure, and then enters the condenser to release heat to heat the water. By circulating and heating in this way, the water can be heated from 50°C to 65°C.
What are the main components of heat pump water heaters?
How does the heat pump water heater work?
Why should the heat pump water heater be green?
Four main components of refrigeration technology: evaporator, compressor, condenser and throttling device.
Three stable parts: liquid storage tank (compressor), expansion valve (capillary tube), dry filter (filtering water and impurities)
A large piece of defrosting: four-way valve
Break through traditional energy conversion theory to achieve high energy efficiency:
When operating the heat pump, the working medium in the evaporator can absorb the energy QA stored in the ambient medium;
And starting the system must consume energy, that is, the power consumption of the QB compressor;
At the same time, the heat emitted from the working medium to the high temperature medium in the condenser is QC;
After the compressor input work starts the system, the mechanical kinetic energy becomes thermal energy. The energy output of the heat pump is thus the sum of the work done by the compressor QB and the heat absorbed by the heat pump from the environment QA; Enter a QB to get QB+QA and break the traditional bottleneck that conversion between different energies cannot achieve full efficiency; Heat pump technology is more energy efficient.
heat pump water heaters work according to the "reverse carnotic" principle, specifically the "outdoor unit" as a heat exchanger absorbs heat from the outside air, heats the low boiling working medium (refrigerant) and evaporates it, and the refrigerant vapor The water is compressed and heated by the compressor and enters the water tank, and the water in which the heat is released is condensed and liquefied and then throttled and pressurized to return to the outer heat exchanger to enter the next circuit. The heat pump water heater simply absorbs the heat in the air to heat the water, and the air that has absorbed the heat can also be used in the kitchen to solve the problem of stuffy heat.
The heat pump water heater has energy saving functions.
The biggest advantage of the heat pump water heater is undoubtedly the energy saving. The low-temperature thermal energy in the air is converted into high-temperature thermal energy by the compressor. Based on the same amount of hot water generation, the energy saving is maximized compared to the water heater with electric heating, and the cost of use is only 1/4 of the cost of electric water heater. Compared to gas water heaters, it consumes no gas fuel and the cost of use is only 1/3 of the cost of gas water heaters. heat pump water heaters take air as the main body and save energy, which not only saves people's usage cost, but also corresponds to the main body of energy saving in the world. This is one of the biggest highlights of air energy water heaters.
Guangdong JNOD New Energy Technology Co., LTD. Focus on research and development of heat pumps and electric boilers, manufacturing and providing comprehensive energy saving solutions.
The heat pump water heater absorbs air energy through the compressor, releases heat through the refrigerant and then heats the hot water. In general, it is a purely electric or boiler fuel, and the air source is supposed to transfer the energy of the air to the water through a certain amount of electrical energy. It is cost effective and has low operating cost. That's the most important thing. heat pump water heaters are safer, more energy-saving, more environmentally friendly, safer and fashionable than ordinary water heaters.
What is the basic working principle of a heat pump water heater?
What are the advantages of heat pump water heater and solar water heater?
Heating and cooling heat pump can be connected to Wi-Fi?
Heat pump water heater mainly consists of compressor, heat exchanger, axial fan, water tank for heat preservation, water pump, liquid storage, filter, electronic expansion valve and electronic automatic control. After switching on the power supply, the axial fan starts running, the outside air flows through the evaporator for heat exchange, and the reduced temperature air is expelled from the system by the fan. A kind of low pressure working medium gas is compressed into high temperature and high pressure gas and fed to the capacitor. The water forcibly circulated by the water pump also passes through the condenser and is heated by the working medium and fed to the consumer for use. The working medium is cooled to a liquid and the liquid expands. After the valve is throttled and cooled, it flows back into the evaporator. This cycle works repeatedly, and the heat energy in the air is continuously "pumped" into the water, so that the water temperature in the water tank for heat preservation gradually rises and finally reaches about 55°C, which is just suitable for people to take a bath.
Both work with air and solar energy, two of nature's renewable energy sources. What's the difference between the two?
In all seasons, even in winter, the effect of solar water heaters is very clear with sufficient sunlight, as well as on long rainy, snow and cloudy days. Solar water heaters cannot reflect the heating effect. The heat pump water heater is not affected by weather and season. It can supply hot water to users at any time. To be clear: The air flow heater can have hot water where there is air!
Wifi Monoblock High performance heat pump for heating and cooling, we offer not only advanced energy efficient heat pumps with advanced inverter technology, but also a total solution for heating, cooling and hot water supply in private homes. It has the WiFi remote. The heating and cooling heat pump can be controlled via Wi-Fi, allowing users to operate their heat pumps anytime, anywhere.
Guangdong JNOD New Energy Technology Co., LTD. can manufacture standard products under customers' brand, modify the products to meet customers' personalized requirements, and cooperate with customers to design and manufacture completely new products.
When the indoor swimming pool is used in winter, it is necessary to heat the pool water to make the water temperature reach 26-28 degrees, which requires a lot of thermal energy. Boilers, gas, and electricity are gradually eliminated due to their low thermal efficiency and environmental protection. More and more people will Option to use Swimming Pool Heat Pump. So in addition to environmental protection, what are the benefits of Swimming Pool Heat Pump?
Compared with traditional boilers, what are the advantages of Swimming Pool Heat Pump?
What advancements have the Swimming Pool Heat Pump made?
Why is the demand for Swimming Pool Heat Pump increasing?
Compared with traditional boilers, Swimming Pool Heat Pump does not use any fuel such as coal, oil, gas, etc., and does not produce open flames and exhaust emissions. Therefore, the use of air source heat pumps not only protects the atmospheric environment, but also eliminates fire, explosion, poisoning, etc. Accident happens. Compared with ordinary electric water heaters, it consumes less power, avoids leakage accidents, saves energy and is environmentally friendly. Compared with solar water heaters, air energy heat pumps are not affected by weather, geography, climate and other factors when working Sunny can be used normally.
① The unit control system adopts intelligent control. When customers use it, they only need to set the air temperature, humidity, and pool water temperature, and then the equipment will enter the fully automatic operation state, and there is no need for special personnel to take care of it.
② Customers can learn air temperature, humidity and other data through the touch-type full-color screen. Real-time value of pool water temperature and operating status of equipment.
③ Customers can also choose a communication interface according to their needs to implement remote control, monitoring and connection with the system.
Customers can choose the intelligent ventilation system of Swimming Pool Heat Pump. After choosing this system, the unit will control the amount of fresh air entering the room according to the concentration of carbon dioxide in the room, which can greatly save the energy consumption during operation.
Not only that, the advancement and development of sports equipment and facilities and equipment technology have also provided a foundation for more people to actively participate in fitness. Take swimming, the most popular sport, as an example. In the past, people swimming in open-air pools or public waters were easily limited by the temperature environment. If they accidentally caught a cold, it would be bad for their health, and microbial bacteria would grow in public waters. , the health situation is not optimistic. In recent years, with the advancement of Swimming Pool Heat Pump related supporting technical facilities, many swimming pools and other fitness places are equipped with heated swimming pools, and even schools, communities, villas, etc. are equipped with heated swimming pools, so that people can not only enjoy the hot summer. The fun of refreshing swimming can also have a comfortable swimming experience in the cold winter.
If you would like to receive more information about the Swimming Pool Heat Pump, please connect Guangdong JNOD New Energy Technology Co., LTD., and they will be happy to answer your question!
Swimming Pool Heat Pump is equipped with high-quality brand scroll compressors, with stable operation, low vibration, low noise, and low failure rate; key components such as thermal expansion valves, electronic appliances, etc. are well-known brand components with reliable performance.
How to choose a truly eco-friendly Swimming Pool Heat Pump?
What is the function of the Swimming Pool Heat Pump damping system?
Why choose an energy-efficient Swimming Pool Heat Pump?
The initial heating determines the model selection. The real energy saving stage of the Swimming Pool Heat Pump depends on the "constant temperature" period.
Select frequency conversion, more energy saving, the key to Swimming Pool Heat Pump lies in the operation logic of frequency conversion technology. In the constant temperature stage, the frequency conversion technology can enable the equipment to operate intelligently at a low frequency and match the real-time heating demand. There is no need to continuously heat the pool water by repeatedly starting and stopping like a fixed-frequency heat pump, so as to achieve the purpose of energy saving. We can compare the energy saving performance of fixed frequency heat pump and variable frequency heat pump under the same conditions.
Due to the difference in temperature, the heating efficiency of the heat pump will also be different. To compare the energy-saving effect in the constant temperature stage, we chose a fixed-frequency heat pump with the same heating level as the variable-frequency heat pump (IPHC150T) selected in the previous step at an air temperature of 26 °C (26 °C is generally used as the test temperature in the laboratory). Frequency selection is 60kw.
① The independent suspension shock absorption system makes the fan and motor run more quietly and reduces the noise caused by air disturbance.
② An integral base carries the fan and the motor, and according to the load-bearing distribution of each part, different types and quantities of shock absorbers are correspondingly configured to avoid jumping, anti-vibration and resonance, and make the operation of the fan and the motor more stable.
③ The fan and the box are isolated by flexible connection to avoid vibration transmission.
Considering indoor air quality, Swimming Pool Heat Pump is equipped with fresh air treatment function and exhaust function.
Considering the operating cost of the constant temperature heat removal pump unit, the Swimming Pool Heat Pump can use a large amount of outdoor low-humidity fresh air to adjust the humidity of the indoor air in spring and autumn, reducing operating costs.
In order to prevent the circulating air from affecting the service life of the Swimming Pool Heat Pump, the key components and sheet metal structure of the equipment are treated with anti-corrosion during the manufacturing process, and the compressor, power distribution cabinet and control system are isolated from the wind system.
Guangdong JNOD New Energy Technology Co., LTD. is committed to providing customers the best hot water & heating solutions with our heat pump products, focusing on the latest technologies, strive for outstanding quality in our products and customer service.
In recent years, the potential energy of the sports industry under the national fitness, and favorable policies such as swimming into the high school entrance examination sports, the constant temperature swimming pool was once in short supply, and the Swimming Pool Heat Pump was out of stock.
What is the first stage of the workflow of Swimming Pool Heat Pump?
What is the second stage of the workflow of Swimming Pool Heat Pump?
What should we pay attention to when using Swimming Pool Heat Pump?
In the first step, the indoor hot and humid air in the swimming pool first exchanges heat with the outdoor fresh air through the heat exchanger to become warm and humid air, and then the warm and humid air flows through the evaporator, the temperature drops, and the water vapor condenses into cold water droplets and is separated from the air. Make the air dry and realize the function of air dehumidification; at the same time, the heat energy (latent heat and sensible heat) is released in the process of air cooling, water vapor condensation and cooling are absorbed by the refrigerant.
In the second step, the heat energy absorbed by the refrigerant first (latent heat) heats the pool water through the heat exchanger to realize the pool water heating function: the residual heat (sensible heat) passes through the air condenser to heat the cooled indoor air to realize the air insulation function. In the severely cold winter, when the energy available for the heat pump to extract in the air is too small, and the heat energy recovered by the heat pump is not enough to meet the requirements of the indoor air temperature, the auxiliary air heater is added to supplement the heat energy required for the indoor hot air. The Swimming Pool Heat Pump only needs to provide its own operating power, that is, it runs continuously according to the above working procedures, and achieves a harmonious balance of the three functions of pool water heating, air conditioning and dehumidification with low energy consumption.
1. When maintaining and cleaning the Swimming Pool Heat Pump, make sure that the Swimming Pool Heat Pump is in a power-off state. In addition, when the heat pump is not in use: the power supply should also be cut off.
2. Do not use gasoline, Tianna water, volatile oil, solvents and other chemicals, or liquid pesticides on the Swimming Pool Heat Pump, otherwise it may cause parts to crack and deform.
3. The area around the Swimming Pool Heat Pump should be kept dry and well ventilated.
4. Regularly clean the air-side heat exchanger to maintain a good heat exchange effect. If the shutdown time is long, the water in the pipeline of the unit should be drained, the power supply should be cut off, and the protective cover should be put on. When it is necessary to use it again, the system must be thoroughly checked before turning it on.
After reading, do you have a deeper understanding of Swimming Pool Heat Pump? For further information, please contact Guangdong JNOD New Energy Technology Co., LTD. They will be very pleased to help you.
A swimming pool heat pump works to keep a constant pool temperature and extend the swimming season. Over the past years, it has stood out from other similar products such as boilers and the electric water heater and gained a growing market share. According to Arizton’s report, the pool heat pump market is expected to grow at a CAGR of over 5% during 2019−2025. Why does the pool heat pump become increasingly popular?
1. The rising economy and preference for swimming
Swimming has a long history and has been very favorable in the western world like North America, Europe, and Australia. It is assumed that the heat pump segment will increase stably in the foreign market owing to the consumption habit formed decades ago. Over the past few years, the thriving economy has made people out of western world more favorable for this sport. The Asia Pacific (APAC) region is expected to grow at a CAGR of around 6% in terms of revenues with a rise in swimming pool construction, high disposable income, and growth in awareness. As people enjoy a higher living standard and the group of villas-resident booms, the heated pool which can protect the privacy and bring better life quality, becomes a must for them.
2. A wave of home workouts during the pandemic, an engine for the private pool economy
During the Covid-19 pandemic, consumers have to stay at home and cannot go to the beach or public swimming pools, so private pools and hot tubs have met a wave of demand. And heat pumps also benefit from the fad. By its core competitiveness and the prosperous market, the heat pump one day will take the lead in the pool industry.
3.Energy efficiency and Cost-effectiveness
Known as one of the most energy-efficient pool heating options available, the heat pump is an “energy sipper” in comparison to other options. While electric heaters will use resistors and gas heaters burn fuel, heat pumps generate heat from ambient air, meaning it harvest heat from the air around it. The tiny amount of energy a heat pump uses to compress and convert is nothing compared to the amount of energy other heating options use.It’s greatly save energy and cut down your electricity bill.
When you use a gas heater you are relying on combustion of the fuel. They continually burn gas in order to produce heat. This process comes with environmental consequences by emitting CO2 that destroys our ozone layer. A heat pump, however, does not burn anything and pull minimal electricity to harvest ambient air, and produces zero CO2 emissions.
Like any investment, you want your pool and all of its moving parts to last for years to come. Gas and electric heaters will only allow for 5-10 years max of usage and any repairs you might need on them will break the bank. A heat pump is built with longevity in mind and at a minimum will last 10-20 years, and with proper maintenance can last even longer.
It's no doubt an ideal choice for the green lifestyle, right?
Please feel free to contact our JNOD sales team when you need a swimming pool heat pump.OEM and ODM project are acceptable.
Email: firstname.lastname@example.org Phone: +86-757-23617848
With the widely known advantages of air energy heat pump products such as cleanliness, environmental protection, energy saving, stability and comfort, heating with Heating and Cooling Heat Pump products has become a trend. More and more northern == home users and schools, hotels, hospitals When transforming the original heating system in other places, choose to use Heating and Cooling Heat Pump.
Compared with ordinary central air conditioning refrigeration and gas wall-hung boiler heating, what are the advantages of Heating and Cooling Heat Pump?
What are the advantages of using the Heating and Cooling Heat Pump?
What is the working principle of Heating and Cooling Heat Pump?
The common heating and cooling equipment on the market is mainly fluorine system heating and cooling air conditioning or the combination of gas wall-hung boiler heating and central air conditioning refrigeration.
The main advantage of Heating and Cooling Heat Pump compared to ordinary heating and cooling air conditioners is high comfort. The fluorine system heating and cooling air conditioner directly controls the indoor temperature through the flow of the refrigerant, and the refrigerant directly exchanges heat with the air. This heat exchange method has two disadvantages: First, the temperature of the air outlet of the air conditioner is very low or very high (7°C-12°C during cooling, 40°C-50°C during heating), the body feels very bad, and it is bitingly cold in summer. The winter is hot and dry; second, although the fluorine system air conditioner has a relatively fast cooling and heating speed, it will also cause a large amount of moisture in the air to be taken away due to the rapid heating and cooling speed, resulting in excessive indoor dehumidification and drying.
1) The unit of Heating and Cooling Heat Pump has high energy efficiency ratio, energy saving and electricity saving.
2) The water temperature of the Heating and Cooling Heat Pump is generally constant at 12-22°C, which is 7°C for the water supply in summer, 12°C for the return water, 45°C for the water supply in winter, and 40°C for the return water, and the temperature difference between them is small. , so the unit has less work and more energy.
During the operation of Heating and Cooling Heat Pump, the evaporator absorbs heat from the ambient heat energy in the air to evaporate the heat transfer working medium. After the working medium vapor is compressed by the compressor, the pressure and temperature rise. When the high-temperature vapor passes through the special annular pipe bonded on the outer surface of the water storage tank, the condenser condenses into liquid and transfers the heat to the water in the water storage tank of air source heat pump.
Guangdong JNOD New Energy Technology Co., LTD. has focused on the development and production of Heating and Cooling Heat Pumps for several years. And it commits to providing perfect service for every customer from all over the world.