Air source heat pump water heaters are the same as the heating principle of air conditioners, they are all heat carriers. The air conditioner moves the outdoor heat into the room, and the air energy water heater moves the outdoor heat to the water tank to heat the cold water in the water tank. Because the heat in the air is free, the air energy water heater also saves electricity.

What is the operating mode and principle of the unit composition of the heat pump water heater?

What are the benefits of installing a heat pump water heater?

What is the difference between a heat pump water heater and an air conditioner?

What is the operating mode and principle of the unit composition of the heat pump water heater?

The heat pump hot water unit is composed of a refrigeration cycle, including two parts: the main engine and the condenser. The main engine part includes evaporator, fan, compressor and expansion valve; the condenser is an incubator with condensing coils inside. The refrigerant absorbs the heat from the outside air in the evaporator and releases heat in the condensing coil through the heat pump cycle to heat the water in the water tank. The thermal insulation layer of the water tank is foamed with closed-cell rubber sponge or polyurethane, and has good thermal insulation performance.

What are the benefits of installing a heat pump water heater?

1. Safety: No gas, no waste gas, and no "gas poisoning"; no electric heating rod for heating, there is no danger of leakage, and people's health and safety are protected.

2. Save money: The COP value is more than 3, the energy efficiency ratio is high, and it definitely saves electricity and money. It can save 2/3~3/4 of electricity expenses, or 1/2~2/3 of gas expenses and auxiliary heating expenses of solar water heaters.

3. Comfort: automatic constant temperature and pressure water supply, never hot and cold when using hot water, hot water has pressure, good comfort. All-weather supply of domestic hot water makes up for the embarrassment of solar energy when there is no hot water available in rainy days, nights, no sunlight, and freezing.

4. Environmental protection: The cold air discharged from the heat pump water heater is beneficial to reduce the room temperature.

What is the difference between a heat pump water heater and an air conditioner?

Comparison of heat pump water heaters and air conditioners: The principle of heat pump water heaters and air conditioners is the same, but the technical content of heat pump water heaters is higher than that of air conditioners, which is why heat pump water heaters have only been listed in recent years. In general, heat pump water heaters are the product of the development of science and technology to a certain stage. The heat dissipation temperature of the air conditioner cannot work in an environment where the cooling temperature is 40~50°C, and the water temperature of the heat pump water heater can reach about 60°C or even higher.

Guangdong JNOD New Energy Technology Co., LTD., which has been established for several years, focuses on the production of heat pump water heaters. Here, you can find the heat pump water heaters you need.

Mother’s Day is a holiday honoring motherhood that is observed in different forms throughout the world. In the United States, Mother’s Day 2022 will occur on Sunday, May 8.

Of all the relationships known to humans, there is one that effortlessly outperforms everything else. It's the relationship that a mother and her children share. It's truly valuable because nothing can come close to a mother's unending love, dedication, and devotion to her children. From the time a child is born, the mother fiercely ensures that the young ones feel protected at all times around her and shapes their personality to make them battle all odds in life. Mother's Day is celebrated to recognize the contributions of all mothers.

History and significance

Mother's Day is a special day for all mothers, whose contributions are often overlooked. It's a day to acknowledge the unquantifiable and selfless contributions of every mother in her children's success. It is also a day to thank her for that.

Celebrations

Irrespective of whenever this day is celebrated across the world, people try to make sure that their mother is happy and enjoys her life. They surprise her with gifts or take her out for dinner or even cook for her at home.

Heating and Cooling Heat Pump has the characteristics of comfort, energy saving, stability, environmental protection, safety, long service life, wide application range and one machine dual use in actual use, which makes Heating and Cooling Heat Pump more popular,favored by users.

What are the advantages of Heating and Cooling Heat Pump?

Why are more and more consumers choosing Heating and Cooling Heat Pump?

What installation conditions are the Heating and Cooling Heat Pump suitable for?

What are the advantages of Heating and Cooling Heat Pump?

1. Safe operation and environmental protection

Heating and Cooling Heat Pump adopts the form of heat pump heating, water and electricity are completely separated, no coal or natural gas is needed, and it will not pollute the environment, and there is no need to worry about the leakage of refrigerant to pollute the environment.

2. Flexible and unlimited use

Heating and Cooling Heat Pump Compared with solar, gas, water ground source heat pumps, air source heat pumps are not limited by geology and gas supply, and are not affected by bad weather such as night, cloudy, rain and snow, so they can Realize safe operation 24 hours a day throughout the year.

3. Energy-saving technology, power saving and worry-free

Heating and Cooling Heat Pump is efficient and environmentally friendly. Compared with electric heating, it saves 75% of electricity bills per month, saving users considerable electricity bills.

Why are more and more consumers choosing Heating and Cooling Heat Pump?

Heating and Cooling Heat Pump can use floor heating as the heating end when heating. The comfort of floor heating is well known. It conforms to the traditional Chinese medicine theory of warm feet and cool top, giving people a feeling of warm feet and cool head. And the upper pass, the room is warm and cool, giving people a natural and comfortable feeling. Of course, radiators and fan coil units can also be selected at the end of indoor heating (when the water supply temperature is 35°C-45°C, the indoor floor heating can be used as the end; when the water supply temperature is 40°C-50°C, the indoor fan coil can be used as the end. The end; when the water temperature is above 55℃, the radiator can be used as the end in the room).

What installation conditions are the Heating and Cooling Heat Pump suitable for?

The main unit of the Heating and Cooling Heat Pump is similar to the outdoor unit of the central air conditioner, and can be installed in the outdoor unit of the central air conditioner, and the air energy heat pump has the functions of cooling and heating, as long as sufficient ventilation and ventilation environment is ensured, for other installations conditions are relatively low. However, when considering the installation factors of solar heating equipment, it is especially necessary to pay attention to the lighting conditions. It is difficult for ordinary elevator apartments to find suitable installation conditions.

For more information about Heating and Cooling Heat Pump, please contact Guangdong JNOD New Energy Technology Co., LTD., Ltd. has committed to providing the increasing of Heating and Cooling Heat Pump, and make them more effective, reliable, and consistent.

A swimming pool heat pump works to keep a constant pool temperature and extend the swimming season. According to Arizton’s report, the pool heat pump market is expected to grow at a CAGR of over 5% during 2019−2025.

JNOD has our swimming pool heat pump to meet the market request.

For the swimming pool heat pump,we have the:

Residential on/off swimming pool heat pump,we can make the heating capacity from 3KW to 25kw.

Residential inverter swimming pool heat pump,we can make the heating capacity from 5kw to 28kw.

We can have the R32 and R410A model,we can make both plastic and metal out case.

It’s with 4 ways valve,provide both heating and cooling mode to create more possibility for pool enjoyment.The high performance, energy-efficient pool heat pump quietly and economically allows you to swim comfortably throughout the year!

Some customers may ask what’s the different between Residential on/off and inverter swimming pool heat pump.

It is very similar to the concept of air conditioning inverter technology.

On/Off is defined as “all or nothing “,the input power or the heating capacity keeps the same.

For the inverter system ,Unlike ON/OFF heat pump with single-speed compressor which by switching on and off periodically to adjust the performance of the heating & cooling, full inverter heat pump uses a variable speed compressor which can automatically adjust the output needed at the lowest consumption of power and maintain the best temperature at different climatic conditions. When the heating demand is high, the inverter compressor and the fan motor will start running at a high speed, inversely, they will run at a low speed.

The advantages included:

1.Achieve an extremely high COP.

2.Shorten heating time.

3.Greatly save energy and cut down electricity bill.

4.Contribute to a quiet neighbor environment.

Some customer told me,their swimming pool is not very big.

Here come a mini swimming pool heat pump will be suitable for you.

We have both 3KW and 5KW heating capacity model.

The mini heat pump is designed for above-ground pools.It’s light and easy to install,can be portable every where.Equipped with a plug & play power connection.

Besides the Residential swimming pool heat pump model,we also have the commercial swimming pool heat pump with full inverter technology meets your comfort needs coupled with energy-efficient operation, which is applied in commercial settings, including water parks, hotels, gyms, and so on.

OEM and ODM project are acceptable.Just contact JNOD sales team to get more information.

How to choose a swimming pool heat pump?

JNOD are selling R32 inverter swimming pool heat pump, its heating capacity ranges from 5.5-32Kw. So, it will be a problem for user or wholesaler to choose the suitable heating capacity for different pool sizes. Let us show you 2 methods to choose the suitable.

Simple & General Method

If you do not want to do complicated calculations and do not take into account extreme weather, you can use the following formula: 3KW for 10m³. For example, if you want to heat a 30CBM pool, (30 CBM÷10CBM)* 3KW = 9KW . So, you can choose the 9.5Kw model.

Accurate calculation Method

This method is used to do a very precise calculation on the heating capacity, considering the heating time, water temperature, ambient temperature, etc.

* Step 1: Calculate the needed heating capacity

In the calculation, we usually set the outlet water temperature at 28℃, primary heating time usually is 48hours.

Formula will use: Q=1.163*△t*V ;

W=Q/T

Explanation:    Q = Heat Demand   (KwH)

△t = Temperature Difference (℃)

V = volume of pool （m³）

W = Heat pump capacity(Kw) - usually will add 15-25% of heat loss

T = Hours for heating （H）

Example: A swimming pool 10*4*1.5m, original temperature is 18℃

Answer: set the target temperature into 28℃, heating hour into 48 hours

Q = 1.163*（28-18）*（10*4*1.5）=697.8 KwH

W= (1+15%) *Q/T=1.15*697.8/48=16.72 KW

*Step 2 : Choose the suitable heating capacity depending on working condition

The heating capacity of a heat pump is not constant; it changes with the ambient temperature. Therefore, after calculating the required heating capacity, we also need to choose the model we need according to the ambient temperature.

Still that sample, we calculate that 16.72Kw is needed. If the ambient temperature is around 24-27℃, you can choose the 17.5Kw model; if ambient temp is around 12-15℃, better to choose 25kw model.

Model	J175P32INVP	J210SP32INVP	J250SP32INVP
Ambient Temperature：（DB/WB）27℃/24.3℃
Heating Capacity (kW)	4.34~18.1	4.72~21.21	5.05~25.28
Power Input (kW)	0.27~2.81	0.29~3.26	0.31~3.89
COP	16.1~6.4	16.2~6.5	16.2~6.5
Ambient Temperature：（DB/WB）15℃/12℃；
Heating Capacity (kW)	3.44~13.35	3.51~14.21	3.81~17.08
Power Input (kW)	0.41~2.61	0.43~2.78	0.48~3.35
COP	8.3~5.1	8.1~5.1	8~5.1

Hope this can help you choose suitable models for swimming pool. 

Any question or idea please don’t hesitate to inquire JNOD!

The heat pump water heater is almost the same as the cooling principle. A good heat pump system design can utilize the cold and hot ends of the refrigeration system at the same time, that is, in hot summer, the indoor is refrigerating, while the outdoor condenser is heating hot water.

What is the purpose of the heat pump water heater?

What are the performance advantages of heat pump water heaters?

What should be paid attention to in the installation of heat pump water heater?

What is the purpose of the heat pump water heater?

heat pump water heater integrates various functions such as hot water supply, heating, dehumidification, cooling, and air filtration:

No matter the weather, rain or snow all year round, the eat pump water heater automatically provides hot water 24 hours a day without interruption;

eat pump water heater High-efficiency dehumidification, the maximum dehumidification capacity is 6~8 kg in 24 hours a day, and the effect is obvious in rainy and rainy weather;

eat pump water heater filters indoor air, and the effect is more obvious when installed in the kitchen.

eat pump water heater With additional heating accessories, it can heat up the room by more than 5°C in winter, making learning, entertainment and sleeping more comfortable. No matter it is cloudy, sunny, day or night, as long as there is air, hot water can be produced. At room temperature, 180L of hot water can be produced per hour.

What are the performance advantages of heat pump water heaters?

1. It is safe enough, water and electricity are separated, no danger, it is heated by the heat of air, and it is highly technological. Other water heaters have certain risks. heat pump water heaters are completely safe, protecting the lives of family members and providing comfortable hot water.

2. Economical enough, heat pump water heater is used in winter, about 1~1.5 kWh of electricity a day, enough for a family of 4~5 people, generally 4~5 people, at least 3~4 kWh of electricity a day.

3. Enough to enjoy, the heat pump water heater can have 24 hours of comfortable hot water, and it is a 24-hour constant temperature, which can be used immediately after opening, saving a lot of time for boiling water and avoiding accidents.

4. It is fashionable enough. The exterior of the heat pump water heater is very good-looking. At first glance, it makes people feel high-end and fashionable.

5. It is convenient enough, the heat pump water heater can be operated by iphone to control the temperature, or it can be controlled by the touch screen of the machine, which is convenient and fast.

6. Comfortable enough, the heat pump water heater has the function of air-conditioning in the kitchen, which solves the problem of hotness in the kitchen and enjoys the sense of accomplishment when cooking.

What should be paid attention to in the installation of heat pump water heater?

With drainage facilities:

When installing the heat pump water heater, condensed water will be discharged during use, so the installation location must have drainage facilities such as floor drains and gutters.

Instrument installation location:

The instrument, that is, the control panel, needs to be installed nearby to avoid rain; since most of the operation modes choose "economy mode", the control panel is rarely operated, and it is not necessary to install it in a very conspicuous position. Install.

Water pipe arrangement:

The inlet and outlet pipes of the heat pump water heater are preferably 25PPR pipes.

JNOD insisted on developing with technology innovation, it possessed of several national famous technicians and had invented multiply product patents. The company has been strictly implement the ISO international quality management system, and the products are of reliable guaranteed quality.

The hot water produced by the heat pump water heater is directly sent to the user through the circulation system as hot water supply or small area heating is carried out by using the fan exhaust pipe. Air source Heat Pump Hot Water Heater is currently the best solution for large, medium and small hot water centralized supply systems in school dormitories, hotels, bathing centers and other places.

Why choose Heat Pump Hot Water Heater?

Where is the better place to install the main unit and water tank of the Heat Pump Hot Water Heater?

What is Heat Pump Hot Water Heater?

Why choose Heat Pump Hot Water Heater?

1. Safety

The Heat Pump Hot Water Heater has the potential safety hazard of leakage, and the gas water heater has the danger of gas poisoning. Compared with these two water heaters, the air energy water heater exchanges heat through the medium, which avoids the direct contact between the electric heating element and the water, which solves the problem. Second, because the raw material of Heat Pump Hot Water Heater is air, it also eliminates the possibility of gas explosion or gas poisoning in gas water heaters, allowing people to use it more comfortably and worry-free.

2. Environmental protection

Energy saving and environmental protection complement each other, and environmental protection is another plus point of Heat Pump Hot Water Heater in its energy saving advantages. First of all, the air energy water heater uses electric energy to compress air to produce heat energy, and does not emit waste gas and toxic gas, which is not only safe, but also creates a pollution-free bathing environment. Secondly, the use time of Heat Pump Hot Water Heater is as long as 15-20 years. The long lifespan can not only reduce the cost and trouble for people to replace the water heater, but also reduce waste production in a sense, which is also an important aspect of environmental protection. aspect.

Where is the better place to install the main unit and water tank of the Heat Pump Hot Water Heater?

Answer: The Heat Pump Hot Water Heater is the best choice to install it on the balcony or bay window. The advantage is that it does not occupy indoor space, it is safe and stable, and the entire hot water piping system will have sufficient hot water; the host is installed in a ventilated and sunny place. it is good. Bay windows or wall hangings can allow the host to absorb heat from the air as much as possible to improve heating efficiency. It is understood that more than 90% of users will choose this installation method.

What is Heat Pump Hot Water Heater?

All-in-one Heat Pump Water Heaters and Split Type Heat Pump Water Heater are included in this hot water series, both on/off and inverter is available. Eco-friendly R32 and R410A refrigerant are adopted, as well the world famous Mitsubishi compressor. This series is widely used in residential and commercial hot water projects.

JNOD insisted on developing with technology innovation, it possessed of several national famous technicians and had invented multiply product patents. The company has been strictly implement the ISO international quality management system, and the products are of reliable guaranteed quality.

With the continuous improvement of living standards, there are more and more users of heating and central air conditioning. Central heating users do not need to worry about the choice of equipment, while household heating users need to face a dazzling array of hot and cold equipment, which is difficult to carry out. choose. Heating and Cooling Heat Pumps are constantly entering the public's field of vision, and are sought after by many users because of their environmental protection and energy-saving features. But what else should you know before choosing a Heating and Cooling Heat Pump?

How energy efficient is the Heating and Cooling Heat Pump?

How to save resources when cooling with Heating and Cooling Heat Pump?

How to save resources when heating with Heating and Cooling Heat Pump?

How energy efficient is the Heating and Cooling Heat Pump?

The Heating and Cooling Heat Pumpcan adjust the indoor temperature by absorbing the heat energy in the air and then transferring it to the water for heat exchange. In summer, it is cooled by fan coil unit, and in winter, it is heated by fan coil unit, floor heating or radiator. It has a dual-purpose function. Heating and Cooling Heat Pump can also be connected in areas with better environment. Domestic hot water, and even the water heater are saved.

How to save resources when cooling with Heating and Cooling Heat Pump?

Heating and Cooling Heat Pumprefrigeration is to cool the circulating water in the pipeline into chilled water through the heat pump unit. The outlet air temperature of the indoor fan coil is between 15°C and 20°C. The chilled water is circulated into the room for heat exchange, and the evaporator The heat absorption in the room transfers the heat in the room to the circulating water in the pipeline, and then the circulating water after the heat absorption is brought to the heat exchanger configured by the heat pump unit through the operation of the water pump for heat exchange, and finally the heat pump host discharges the heat to the air In the cycle, this process is repeated to achieve the effect of indoor cooling. However, it should be noted that after the circulating water in the pipeline is cooled by the Heating and Cooling Heat Pump, the temperature can be kept stable for a long time without heat exchange, and there is no short-term loss of cooling capacity. Energy consumption will also be lower.

How to save resources when heating with Heating and Cooling Heat Pump?

Heating and Cooling Heat Pump heating is to replace the collected heat into the heating pipeline through the heat pump unit, and then deliver the water to the floor heating, fan coil and radiator at 35°C-45°C, 40°C-50°C and 55°C respectively. The heat is released in the middle, so as to achieve the effect of indoor heating. Because the air energy heat pump adopts frequency conversion technology and jet enthalpy increasing technology, it has a high energy efficiency ratio, and can obtain more than three times the heat energy from the low temperature environment, and the energy saving performance will be much higher than that of direct conversion of electric energy into heat energy.

After reading, do you have a deeper understanding of Heating and Cooling Heat Pump? For further information, please contact Guangdong JNOD New Energy Technology Co., LTD. They will be very pleased to help you!

2022-11-13 · Commercial swimming pool heat pump provides the maximum energy efficiency and reliability. Working efficiently,the heat pump units absorb another 6 times of free heat from the ambient environment,and transfer it to the pool water,which makes the heating process ecological and cost saving. Add to Enquiry.

Home > Products > Heat Pump Water Heaters > Rheem Thermal Hot Water Heat Pump Water Heater 10kW

Air to Water HeatPumpWater Heater forHotelHot Water forWashing FOB Price: US

ERP A WIFI Air Source Heat Pump for Heating Cooling and Hot Water with DC Inverter Monoblock Heatpump MGSDC-080IIC Model Model: MGSDC-080IIC Brand: Mango Code: …

2021-3-22 · High delivered water temperature (65° C) What we don't like about the SANCO2: That's a pretty easy answer - the price. The Vancouver distributor sells the outdoor unit for

ExGizmo 11KW 220V Electric Water Heater Thermostat Swimming Pool Heater SPA Hot Tub for Above Ground Inground Pool Hot Tub Heater Pump with Digital Display Touch Screen Control Brand: ExGizmo 5 ratings

All In One Heating And Cooling Heat Pump on sale manufacturers, find details about All In One Heating And Cooling Heat Pump manufacturers, supplier and wholesaler - Guangdong JNOD …

JNOD Energy Air Flow Monoblock Reversible Heating And Cooling Heat Pump. *WiFi Remote Control. The heating and cooling heat pump can be controlled by Wi-Fi, it release the users that can operate their heat pumps anytime and anywhere. *Mitsubishi Compressor. EVI system can ensure stable and safe operation of unit under -25℃ ambient temperature.