Air source heat pump water heaters have the characteristics of high efficiency and energy saving. Its energy saving effect is 4 times that of electric water heaters, 3 times that of gas water heaters, and about 2 times that of solar water heaters.

Is there a difference between an air source heat pump water heater and a normal water heater?

What are the environmental protection features of heat pump water heaters?

How does the heat pump water heater work?

Is there a difference between an air source heat pump water heater and a normal water heater?

Environmental protection, the heat pump water heater realizes that there is hot water whenever you want. Because it does not use electric heating elements for direct heating, compared with electric water heaters, it eliminates the potential safety hazard of electric leakage; compared with gas water heaters, there is no gas leakage, or Safety hazards such as carbon monoxide poisoning, so it has better safety performance. The air energy heat pump is regenerative, and the heating function is automatically activated according to the temperature in the water tank to ensure sufficient supply of hot water for 24 hours, so there is no such problem as the gas water heater that cannot meet the hot water for multiple faucets at the same time, nor will it There is a problem that the capacity of the electric water heater is small, and many people need to wait for a bath. The hot water is ready to use, the water output is large, and the water temperature is stable, meeting all your expectations for hot water. Because its power consumption is only one-fourth of the same amount of electric water heater, which is equivalent to using the same amount of hot water, using an air-energy heat pump, the electricity bill is only one-fourth of that of electric heating. Calculated for a family of 4, the normal consumption of hot water is about 200l/day. Electric water heaters cost about 4 yuan/day for heating, while heat pump water heaters only cost about 1 yuan/day, saving 1,000 yuan a year.

Where are the environmental protection features of heat pump water heaters?

Environmental protection of heat pump water heaters: using clean energy, no waste gas, waste water, waste residue, and no thermal effect on the air. The use of environmentally friendly heat medium, cfc-free, will not cause damage to the atmospheric ozone layer. Uses of heat pump water heaters: heat pump water heaters can be used in hot water systems with a temperature requirement lower than 65°C, such as bathing, sauna, swimming pool, foot bath, beauty salon, agricultural breeding, etc. The heat pump water heater has a high energy efficiency ratio and is more energy-saving.

How does the heat pump water heater work?

A heat pump water heater is essentially a heat lifting device. The function of the heat pump is to absorb heat from the surrounding environment and transfer it to the object being heated (a higher temperature object). Its working principle is the same as that of a refrigerator. It works according to the reversed Carnot cycle, the only difference is that the working temperature range is different.

Guangdong JNOD New Energy Technology Co., LTD. has been a Chinese pioneer in heat pump water heater for several years. They can provide any type of heat pump water heaters you need. At the same time, their after-sales service is also very considerate.

Swimming Pool Heat Pump is mainly used in constant temperature swimming pools, hot springs, saunas, foot baths, bathhouses, private villas and other constant temperature heating pools. It operates fully automatically, and its modular design is suitable for applications in various functions.

What is the advance in the Swimming Pool Heat Pump?

Why choose Swimming Pool Heat Pump?

How should the heating capacity of the Swimming Pool Heat Pump be obtained?

What are the advantages of Swimming Pool Heat Pump?

Swimming Pool Heat Pump has the characteristics of multi-function, energy saving and consumption reduction. The Swimming Pool Heat Pump in the swimming pool can not only recover the heat lost from the evaporation of the pool water through the constant temperature dehumidification heat pump during the dehumidification and air conditioning operation, but also reuse this part of the free heat to heat the pool water and air to make up for the pool water and air. The heat loss of the indoor swimming pool can be achieved to achieve the purpose of energy saving and cost reduction in the indoor swimming pool. There is also optional plasma sterilization and purification device to purify the air in an all-round way to create a fresh, clean and healthy indoor air environment.

Why choose Swimming Pool Heat Pump?

Swimming Pool Heat Pump only requires the user to set parameters such as space target temperature, pool target water temperature, space target humidity, and space carbon dioxide target concentration, and then select the automatic mode. With the priority level set by the program, the automatic operation meet all the requirements required by the user. Swimming Pool Heat Pump has stable operation, safety and environmental protection, and the average cost saving is 40%~60%, and the energy saving effect is obvious. Swimming Pool Heat Pump is suitable for large swimming pools, such as gymnasiums, athlete training halls, water entertainment and leisure places, etc. The three-in-one heat pump cabinet type is suitable for new and renovated indoor swimming pool projects such as private swimming pools, senior club swimming pools, hotels, etc.

How should the heating capacity of the Swimming Pool Heat Pump be obtained?

1. The basic situation of the swimming pool (area, water depth, indoor or outdoor, and the following will take indoor as an example)

2. The temperature of the place (initial water temperature, wind speed on the water surface of the pool, local atmospheric pressure, etc.)

3. Set the target temperature for heating (26℃~28℃)

4. The heat loss caused during the heat transfer process includes: the heat lost by evaporation on the surface of the pool water, the heat lost by conduction from the pool wall and the bottom of the pool, and the heat lost by pipes and equipment.

JNOD which has insisted on developing with technology innovation possessed several national famous technicians and had invented multiply product patents. The company has been strictly implementing the ISO international quality management system, and the products are of reliable guaranteed quality.

With the soaring price of gas and the emphasis on environmental protection in many countries around the world, heat pumps are becoming more and more important and popular among consumers and manufacturers. In the last 2 years, many various kinds of heat pumps have appeared on the market. In this article, we will teach you how to choose a good hybrid hot water heat pump, also called all in one heat pump water heater.

For a hot water heat pump, the water tank is very important, both the outcase and the interior are very important.

* Internal

At this point, we would recommend our customers to choose a hot water heat pump with an enameled water tank for the following reasons.

A. Good thermal insulation: Take JNOD's all in one heat pump with enameled tank as an example. After testing, when the water in the tank is boiled to the set temperature and then power off, the water in the tank will only have a temperature drop of 5-8 degrees Celsius after 24 hours. Such a hybrid heat pump is your wise choice.

B. Strong corrosion resistance: In areas with bad water quality, there are more impurities in the water. If you use the general iron water tank, the welding joints inside are prone to chemical reaction with impurities, which leads to the problem of water leakage.

* Outcase

Here we recommend that consumers choose galvanized steel plate as the shell material. There are businesses in the market will choose color plate. The service life of the color plate is very short, only 1-2 years. A long time inside the box exposed will also lead to water leakage problems in the tank.

Expect these suggestions will let you choose a better heat pump! Feel free to contact JNOD with any questions! Link:https://www.jnodheatpump.com

Does heat pump consume electricity a lot ?

The answer to this question is of great concern to consumers and JNOD's answer is that air source heat pumps are a very energy efficient new energy heating device, compared to other electric heating devices on the market.

Heat pumps require some electricity to operate, but the amount is relatively small. 

The air source heat pump type works by using a small amount of electricity to drive the compressor to run and put the whole heat pump system into operation.

 

Heat is continuously absorbed from the air through the evaporator. 

Finally the heat absorbed and the heat generated by the electricity consumed is transferred to the water through the condenser.

We usually measure the efficiency of a heat pump in terms of COP. 

This unit is determined by measuring the energy input (in this case, electricity) and the energy output (heat). 

A heat pump with a CoP of 3 can produce 3 kW of heat from every 1 kW of electricity. 

Modern heat pump systems can transfer three to four times more heat energy in the form of heat than they consume in electrical energy to do this job. 

Other electric heating products such as the boiler, which has a COP = 1, mean that as much electricity as you want to produce heat is consumed. 

So choose a product with a COP greater than 1 (JNOD's heat pump) and you'll save on your energy bills!

Furthermore, JNOD's heating and cooling heat pump has Inverter EVI technology, which will allow the heat pump to adjust its operating power according to the ambient temperature, which will be even better.

There are many different factors will influence on your heat pump's electricity consumption, for example lifestyle, size of heat pump, heating space size,etc. 

Don't hesitate to contact JNOD for further advice and discussion on heat pump.

Swimming Pool heat pumps are one of the most cost efficient heating options on the market. The start-up costs can be somewhat expensive but they are highly energy efficient while offering advanced heating technology. Swimming Pool heat pumps pay for themselves after just a couple of seasons via the savings you'll see on your utility bills.

Swimming Pool Heat Pump Benefits

Reliable and durable heat pumps require fewer repairs than gas heaters.

No emissions and low electrical use make heat pumps the eco-friendly pool heater.

Heats for much lower costs, costing 50-75% less than gas heaters to operate.

How Swimming Pool Heat Pumps Work:Swimming Pool heat pumps leverage a combination of air and electricity to heat your pool water. They use electricity to power a fan and a small compressor, to absorb surrounding air heat and transfer it into your pool’s water. Pool heat pumps require very little electricity to run.

Swimming Pool Heat Pump Installation: Heat pumps can be purchased, placed level and plumbed after the filter by any handy homeowner, but we recommend an electrician to come in for the power hook-up.

Swimming Pool Heat Pump Operation Cost: The cost to operate a heat pump depends on many factors such as size of Swimming pool, size of heat pump and the outside air temperature. When the air temperatures are colder, the fan and compressor must run longer to maintain temperature, but during warmer periods the heat pump may need to run only an hour per day to maintain water temperature.

For the swimming pool heat pump, we have both R32 and R410A model. The heating capacity can be made from 3KW to 97.5KW. ON/OFF and inverter model,residetial and commercial are available. It’s with 4 ways valve,provide both heating and cooling mode to create more possibility for pool enjoyment.

If you want to know more information, please feel free to contact us.

Swimming Pool Heat Pump is equipped with high-quality brand scroll compressors, with stable operation, low vibration, low noise, and low failure rate; key components such as thermal expansion valves, electronic appliances, etc. are well-known brand components with reliable performance.

How to choose a truly eco-friendly Swimming Pool Heat Pump?

What is the function of the Swimming Pool Heat Pump damping system?

Why choose an energy-efficient Swimming Pool Heat Pump?

How to choose a truly eco-friendly Swimming Pool Heat Pump?

The initial heating determines the model selection. The real energy saving stage of the Swimming Pool Heat Pump depends on the "constant temperature" period.

Select frequency conversion, more energy saving, the key to Swimming Pool Heat Pump lies in the operation logic of frequency conversion technology. In the constant temperature stage, the frequency conversion technology can enable the equipment to operate intelligently at a low frequency and match the real-time heating demand. There is no need to continuously heat the pool water by repeatedly starting and stopping like a fixed-frequency heat pump, so as to achieve the purpose of energy saving. We can compare the energy saving performance of fixed frequency heat pump and variable frequency heat pump under the same conditions.

Due to the difference in temperature, the heating efficiency of the heat pump will also be different. To compare the energy-saving effect in the constant temperature stage, we chose a fixed-frequency heat pump with the same heating level as the variable-frequency heat pump (IPHC150T) selected in the previous step at an air temperature of 26 °C (26 °C is generally used as the test temperature in the laboratory). Frequency selection is 60kw.

What is the function of the Swimming Pool Heat Pump damping system?

① The independent suspension shock absorption system makes the fan and motor run more quietly and reduces the noise caused by air disturbance.

② An integral base carries the fan and the motor, and according to the load-bearing distribution of each part, different types and quantities of shock absorbers are correspondingly configured to avoid jumping, anti-vibration and resonance, and make the operation of the fan and the motor more stable.

③ The fan and the box are isolated by flexible connection to avoid vibration transmission.

Why choose an energy-efficient Swimming Pool Heat Pump?

Considering indoor air quality, Swimming Pool Heat Pump is equipped with fresh air treatment function and exhaust function.

Considering the operating cost of the constant temperature heat removal pump unit, the Swimming Pool Heat Pump can use a large amount of outdoor low-humidity fresh air to adjust the humidity of the indoor air in spring and autumn, reducing operating costs.

In order to prevent the circulating air from affecting the service life of the Swimming Pool Heat Pump, the key components and sheet metal structure of the equipment are treated with anti-corrosion during the manufacturing process, and the compressor, power distribution cabinet and control system are isolated from the wind system.

Guangdong JNOD New Energy Technology Co., LTD. is committed to providing customers the best hot water & heating solutions with our heat pump products, focusing on the latest technologies, strive for outstanding quality in our products and customer service.

Air source heat pump water heaters are the same as the heating principle of air conditioners, they are all heat carriers. The air conditioner moves the outdoor heat into the room, and the air energy water heater moves the outdoor heat to the water tank to heat the cold water in the water tank. Because the heat in the air is free, the air energy water heater also saves electricity.

What is the operating mode and principle of the unit composition of the heat pump water heater?

What are the benefits of installing a heat pump water heater?

What is the difference between a heat pump water heater and an air conditioner?

What is the operating mode and principle of the unit composition of the heat pump water heater?

The heat pump hot water unit is composed of a refrigeration cycle, including two parts: the main engine and the condenser. The main engine part includes evaporator, fan, compressor and expansion valve; the condenser is an incubator with condensing coils inside. The refrigerant absorbs the heat from the outside air in the evaporator and releases heat in the condensing coil through the heat pump cycle to heat the water in the water tank. The thermal insulation layer of the water tank is foamed with closed-cell rubber sponge or polyurethane, and has good thermal insulation performance.

What are the benefits of installing a heat pump water heater?

1. Safety: No gas, no waste gas, and no "gas poisoning"; no electric heating rod for heating, there is no danger of leakage, and people's health and safety are protected.

2. Save money: The COP value is more than 3, the energy efficiency ratio is high, and it definitely saves electricity and money. It can save 2/3~3/4 of electricity expenses, or 1/2~2/3 of gas expenses and auxiliary heating expenses of solar water heaters.

3. Comfort: automatic constant temperature and pressure water supply, never hot and cold when using hot water, hot water has pressure, good comfort. All-weather supply of domestic hot water makes up for the embarrassment of solar energy when there is no hot water available in rainy days, nights, no sunlight, and freezing.

4. Environmental protection: The cold air discharged from the heat pump water heater is beneficial to reduce the room temperature.

What is the difference between a heat pump water heater and an air conditioner?

Comparison of heat pump water heaters and air conditioners: The principle of heat pump water heaters and air conditioners is the same, but the technical content of heat pump water heaters is higher than that of air conditioners, which is why heat pump water heaters have only been listed in recent years. In general, heat pump water heaters are the product of the development of science and technology to a certain stage. The heat dissipation temperature of the air conditioner cannot work in an environment where the cooling temperature is 40~50°C, and the water temperature of the heat pump water heater can reach about 60°C or even higher.

Guangdong JNOD New Energy Technology Co., LTD., which has been established for several years, focuses on the production of heat pump water heaters. Here, you can find the heat pump water heaters you need.

Heating and Cooling Heat Pump is a central air-conditioning unit that uses air as a cooling (heat) source and water as a circulating medium to transfer energy. Its advantages are that it is easy to install and use, and it can be used after connecting to the power supply, saving a complex cooling water system and a boiler heating system.

Compared with other products of the same type, why is Heating and Cooling Heat Pump cost-effective?

What are the common Heating and Cooling Heat Pumps on the market?

What to look for when choosing a Heating and Cooling Heat Pump?

Compared with other products of the same type, why is Heating and Cooling Heat Pump cost-effective?

Compared with electric boilers, Heating and Cooling Heat Pump can save more than 50% of power consumption, and reduce the trouble of frequent replacement of electric heating tubes; Compared with traditional coal boilers and oil-fired boilers, Heating and Cooling Heat Pump is pollution-free, emission-free, and safe , eliminating the need for annual routine security inspections, eliminating the need for professional boiler workers, fully automatic temperature control, and significantly reducing operating costs by more than 50%. Heating and Cooling Heat Pump completes a heat pump for heating and cooling needs in a particular field. Generally speaking, Heating and Cooling Heat Pump uses specialized heat pump compressors, special refrigerants and systems.

What are the common Heating and Cooling Heat Pumps on the market?

There are many types of heat pump water heaters on the market, mainly including three series of solar boost type, water source and air source. Solar-assisted heat pump is a heat pump technology that combines heat pump and solar energy technology; water source heat pump uses a certain temperature water source (above 20 ℃) as a heat source and uses refrigerant as a medium to absorb the heat in the water source and then compress it by a compressor. For heating, exchange heat with cold water through a heat exchanger to achieve the purpose of heating and producing hot water. The water source heat pump must have a water source with a certain temperature and flow; the air source heat pump obtains heat from the air in a similar way to the water source heat pump to heat water. Among the three types of heat pumps, the air source heat pump is subject to the least restriction and has the largest development space.

What to look for when choosing a Heating and Cooling Heat Pump?

Whether the Heating and Cooling Heat Pump saves electricity has a lot to do with outdoor temperature, building insulation, user usage, equipment purchase and installation. If you want to save more electricity, users not only need to carefully select air source products, such as buying big brands as much as possible, finding professionally qualified installers for installation, etc., but also mastering the correct air source heat pump heating method, in order to achieve high efficiency and energy saving.

Guangdong JNOD New Energy Technology Co., LTD. has various Heating and Cooling Heat Pumps that can provide the increasing of products, and make them more effective, reliable, and consistent.

Unilever factory high temperature hot water supply Category：Hot water- Factory Selected model:TONGYI air source Commercial heat pump water heater Description：TONGYI Commercial EVI heat pump water heater, supply ultra high temperature (90℃) hot water for processing. Guangzhou HONDA motor factory hot water supply Category：Hot water- Factory

Sai Heating

2022-11-24 · Energy Efficiency Grade: Two Heat Temperature: 50-70°C Work Environment: Common Heat Pump Heat Source: Air-source Heating Type: Circulating Heat Application: Villa Family, Sauna and Swimming Pool, Hotels, Factory Hospital, Student Apartments, Beauty Salons

A swimming pool heat pump is the most economical systems to heat an outdoor swimming pool. The operating principle is quite simple: the free heat in the air is trapped and transferred to the swimming pool water. For one kWh …

YKR heatpump manufacturers can customize the sample frequency conversion heatingcoolingheat pumpevi heat pump Guangdong Y.K.R. New Energy Co., Ltd. US

Check out our mini pool heat pump Typical Pool Sizes and Volumes 8′ x 30″ Intex above ground pool = 3.6 m3

Therefore, it can smartly adjust their speed, according to the temperature of air and water temperatures. So it enbles the inveter heat pumps to heat the pool quickly. * Constant Water Temperature * Heating

The Deakon P1 series swimming pool heat pump is designed for heating swimming pools. It removes the heat from the surrounding air and transfers the heat to the swimming pool water by means of a titanium heat exchanger. Most pool owners rarely enjoy their pool's full use due to the water being too cold.