











Swimming Pool Heat Pump is used to maintain the temperature of swimming pool water. Swimming Pool Heat Pump, because the indoor swimming pool generally maintains the water temperature at 26℃~28℃ and the air temperature at 28℃~30℃ (the air temperature is 1℃~2℃ higher than the water temperature).
What is the reason for the continued popularity of the Swimming Pool Heat Pump?
Why is Swimming Pool Heat Pump in demand?
What metrics should be considered for Swimming Pool Heat Pump?
Not only swimming pools, but also from hotels to fitness clubs, heated swimming pools are becoming more and more indispensable, and the power consumption of constant temperature heating equipment has become one of the power consumption concerns of swimming pool owners, and its operating cost should not be underestimated.
Faced with the phenomenon that the market is in short supply, for many swimming pool owners who are eager to generate income, how to improve the energy efficiency utilization rate of the swimming pool constant temperature heat pump, ensure the efficient operation of the swimming pool in the low temperature climate, extend the popularity to the four seasons, and realize the full swimming pool. Annual business has become a key upgrade direction.
Since the water temperature of indoor swimming pools is generally kept at 26°C~28°C, and the air temperature is kept at 28°C~30°C (the air temperature is 1°C~2°C higher than the water temperature), for lighting needs, the walls are mostly glass walls or glass structures. Because the pool water contains a lot of chlorine, with the continuous evaporation of the water in the pool, the air humidity is high, and the humid air causes a lot of condensation on the walls or glass, which is bound to cause strong corrosion to the interior decoration of the building. In addition, because humid air contains a large number of viruses, bacteria and other elements that reduce air quality, it can make it difficult for people to breathe, so indoor swimming pool temperature and humidity control are getting more and more attention. Swimming Pool Heat Pump has also attracted the attention of consumers.
Swimming Pool Heat Pump considers indoor air quality, and the constant temperature heat removal pump unit is equipped with fresh air treatment function and exhaust air function.
Swimming Pool Heat Pump considers the operating cost of the constant temperature heat removal pump unit. In the spring and autumn, a large amount of outdoor low-humidity fresh air can be used to adjust the humidity of the indoor air to reduce the operating cost.
In order to prevent the circulating air from affecting the service life of the equipment, the key components and sheet metal structure of the Swimming Pool Heat Pump are treated with anti-corrosion during the manufacturing process, and the compressor, power distribution cabinet and control system are isolated from the wind system.
After reading, do you have a deeper understanding of Swimming Pool Heat Pump? For further information, please contact Guangdong JNOD New Energy Technology Co., LTD.
The heat pump water heater absorbs air energy through the compressor, releases heat through the refrigerant and then heats the hot water. In general, it is a purely electric or boiler fuel, and the air source is supposed to transfer the energy of the air to the water through a certain amount of electrical energy. It is cost effective and has low operating cost. That's the most important thing. heat pump water heaters are safer, more energy-saving, more environmentally friendly, safer and fashionable than ordinary water heaters.
What is the basic working principle of a heat pump water heater?
What are the advantages of heat pump water heater and solar water heater?
Heating and cooling heat pump can be connected to Wi-Fi?
Heat pump water heater mainly consists of compressor, heat exchanger, axial fan, water tank for heat preservation, water pump, liquid storage, filter, electronic expansion valve and electronic automatic control. After switching on the power supply, the axial fan starts running, the outside air flows through the evaporator for heat exchange, and the reduced temperature air is expelled from the system by the fan. A kind of low pressure working medium gas is compressed into high temperature and high pressure gas and fed to the capacitor. The water forcibly circulated by the water pump also passes through the condenser and is heated by the working medium and fed to the consumer for use. The working medium is cooled to a liquid and the liquid expands. After the valve is throttled and cooled, it flows back into the evaporator. This cycle works repeatedly, and the heat energy in the air is continuously "pumped" into the water, so that the water temperature in the water tank for heat preservation gradually rises and finally reaches about 55°C, which is just suitable for people to take a bath.
Both work with air and solar energy, two of nature's renewable energy sources. What's the difference between the two?
In all seasons, even in winter, the effect of solar water heaters is very clear with sufficient sunlight, as well as on long rainy, snow and cloudy days. Solar water heaters cannot reflect the heating effect. The heat pump water heater is not affected by weather and season. It can supply hot water to users at any time. To be clear: The air flow heater can have hot water where there is air!
Wifi Monoblock High performance heat pump for heating and cooling, we offer not only advanced energy efficient heat pumps with advanced inverter technology, but also a total solution for heating, cooling and hot water supply in private homes. It has the WiFi remote. The heating and cooling heat pump can be controlled via Wi-Fi, allowing users to operate their heat pumps anytime, anywhere.
Guangdong JNOD New Energy Technology Co., LTD. can manufacture standard products under customers' brand, modify the products to meet customers' personalized requirements, and cooperate with customers to design and manufacture completely new products.
The working principle of the Heating and Cooling Heat Pump is a mechanical device that forces heat to flow from a low temperature object to a high temperature object in a reverse cycle. The applied low-grade thermal energy is utilized to achieve the purpose of energy saving.
How does the Heating and Cooling Heat Pump perform cooling and heating respectively?
What is the principle of Heating and Cooling Heat Pump?
Why is Heating and Cooling Heat Pump so practical?
When the air conditioner cools down in summer, the Heating and Cooling Heat Pump operates according to the cooling condition, and the high-pressure steam discharged from the compressor enters the condenser through the reversing valve (also known as the four-way valve); when heating in winter, the reversing valve Turn to the working position of the heat pump, so the high-pressure refrigerant vapor discharged from the compressor flows into the indoor evaporator (used as a condenser) after passing through the reversing valve, and the latent heat released when the refrigerant vapor condenses heats the indoor air to achieve indoor heating purposes. The condensed liquid refrigerant flows in the reverse direction through the throttling device into the condenser (used as an evaporator), absorbs external heat and evaporates, and the evaporated steam is sucked by the compressor after passing through the reversing valve to complete the heating cycle. In this way, the Heating and Cooling Heat Pump "pumps" the heat from the outside air (or circulating water) into the room with a higher temperature, so it is called a "heat pump"
When the air conditioner cools down in summer, it operates according to the refrigeration condition. The high-pressure steam discharged from the compressor by the Heating and Cooling Heat Pump enters the condenser through the reversing valve (also known as the four-way valve), and the refrigerant vapor is condensed into liquid. The flow device enters the evaporator, absorbs heat in the evaporator, cools the indoor air, and the evaporated refrigerant vapor is sucked by the compressor after passing through the reversing valve, and this cycle is repeated to realize the refrigeration cycle.
Heating and Cooling Heat Pump can operate normally between -27℃-48℃, and some low-temperature air-energy heat pumps are also capable of -35℃ ambient temperature, and still maintain normal operation. In our environment, a It can be used all-weather all year round, and will not be affected too much by rainy, windy and snowy weather, nor will it be affected by low temperature at night. However, solar heating equipment is greatly affected by environmental factors. In the case of insufficient light, it is difficult to achieve the effect of indoor heating, especially in areas with low ambient temperature in winter.
Guangdong JNOD New Energy Technology Co., LTD. provided marketing consultancy services and business solutions for customers from over 40 countries. tailor-make solution of hot water supply base on customer's market demand.
In the Heating and Cooling Heat Pump structure, the refrigerant directly exchanges heat with the air to be treated, without secondary heat exchange in the middle, which reduces the intermediate heat exchange links, which can effectively reduce the energy consumption of the system and improve the heat exchange efficiency.
What is the technological advancement of Heating and Cooling Heat Pump compared to traditional air conditioners?
Where can Heating and Cooling Heat Pump be used?
Why does Heating and Cooling Heat Pump become the choice of more and more consumers?
The refrigeration principle of the traditional air conditioner is to use the change of the physical state of the refrigerant. The change from the gaseous state to the liquid state will emit heat, and the change from the liquid state to the gaseous state will absorb heat. The "reverse Carnot" cycle used for Heating and Cooling Heat Pump is opposite to the refrigeration principle of traditional air conditioners. Using a "four-way electromagnetic reversing valve", a refrigeration cycle or a heating cycle can be realized, so that the car can get cold or hot air. . In the cycle of air-conditioning refrigerant, a large amount of heat will be released during the process of liquefying high-temperature and high-pressure gas into high-pressure liquid in the condenser, which is the principle of heat pump heat release. In winter, the reversing valve can be used to change the flow direction of the air-conditioning refrigerant. At this time, the evaporator acts as a condenser to release heat in the reverse cycle, forming a "heat source". At this time, only a small amount of electricity is consumed, and a large amount of heat from the outside can be transported and "pumped" into the pure electric vehicle to become a heat pump. However, the heating effect of heat pumps in low temperature environments needs to be improved.
The heating principle of Heating and Cooling Heat Pump is completely different from that of traditional solar water heaters. Air source heat pumps use air, water, solar energy, etc. as low-temperature heat sources. The hot water is directly sent to the user through the circulation system as hot water supply or small area heating using fan coil units. Heating and Cooling Heat Pump is the best solution for large, medium and small hot water centralized supply systems in school dormitories, hotels, bathing centers and other places.
Heating and Cooling Heat Pump is one of the most advanced energy utilization products in the world today. With the rapid development of the economy and the improvement of people's living standards, hot water for domestic use has become a necessity for people's lives. However, traditional water heaters (electric water heaters, fuel-fired water heaters, and gas water heaters) have disadvantages such as high energy consumption, high cost, and serious pollution; The operation of energy-saving and environmentally friendly solar water heaters is restricted by meteorological conditions.
After reading these words, do you have a interest to order an Heating and Cooling Heat Pump ? If necessary, you can contact Guangdong JNOD New Energy Technology Co., LTD., which is an advance Heating and Cooling Heat Pump Manufacturer.
Compared with the traditional swimming pool heating method, the biggest advantage of Swimming Pool Heat Pump is that it can effectively improve the heating speed and constant temperature of the swimming pool, making the swimming pool water heating safer, more energy-saving and faster, so as to meet the different heating temperature requirements of the swimming pool.
Is the Swimming Pool Heat Pump safe to use?
What are the application advantages of Swimming Pool Heat Pump?
What are the benefits for consumers of the application of Swimming Pool Heat Pump?
Swimming Pool Heat Pump relies on the "reverse Carnot" principle to work, using clean and renewable raw materials (air energy + electricity) as energy, neither generating harmful gases to the human body nor causing pollution to the atmosphere. With only a small amount of electricity input, a large amount of heating benefits can be obtained, providing a 24-hour constant temperature for the swimming pool.
From the perspective of energy saving and safety, Swimming Pool Heat Pump is an ideal choice for indoor swimming pool heating equipment. It is powerful, stable and efficient. It adopts high-efficiency titanium bubble heat exchanger, which has high efficiency, corrosion resistance and ultra-high energy efficiency. Refrigeration accessories, high operating efficiency and energy saving. And it is safe and reliable, water and electricity are completely separated; it can also intelligently control, realize independent temperature control, intelligent defrosting, etc. It is widely used in various swimming pools, hotel swimming pools, SPA, hot springs, bubble pools, etc., and it is easy to use.
Swimming Pool Heat Pumpdoes not discharge any pollutants during operation, and there are no safety hazards such as fire, explosion, poisoning, etc., which is very safe and environmentally friendly. As a professional swimming pool constant temperature equipment, Tongyi Air Energy swimming pool special constant temperature heat pump is equipped with a triple disinfection filter protection system, which can automatically complete disinfection, adjust pH value, and collect tiny dirt and suspended particles (such as dandruff, dust, etc. in swimming pool water) ), hair and other pollutants, not only to ensure the cleanliness of the swimming pool water, but also to protect the normal operation of subsequent equipment, effectively reducing the workload of the staff. For swimming pool operators, Swimming Pool Heat Pump saves more than 65% of operating costs compared to hot water equipment using other energy sources, and the unit is fully automatic and intelligent, which greatly reduces labor costs.
The Swimming Pool Heat Pump keeps the indoor heated swimming pool at a constant temperature of 26-28 degrees. Normal swimming pools use cold water. Due to the low water temperature (0-10 degrees in winter, 10-20 degrees in summer), not many people can swim in cold water, especially children, the possibility of catching a cold is very high. The constant temperature swimming pool is heated by heating equipment and maintains a temperature of 26-28 degrees throughout the year, which is suitable for the human body and allows you to say goodbye to the risk of swimming colds.
Guangdong JNOD New Energy Technology Co., LTD. focuses on heat pump& electric boiler R&D, manufacturing and providing comprehensive energy-saving solutions.
With the Super September on Alibaba we will be here with you on our live steam show on Sept 16th 0:00 Beijing Time.
This time will be mainly promote to you our newest product to support you in the energy war. Both our heat pump and electric boiler are high efficiency and energy saving.
A big discount up to 10% will be shared during the show.
Welcome to join us and feel free to get more information on our live show.
Time: Sept 16th 0:00 & Sept 22nd 0:00 Beijing Time.
Link & QR code:
https://www.alibaba.com/live/hottest-trending-electric-boiler-%2526amp%253B-heat_046ebf3a-1bef-42d4-9845-c638bcd7056d.html?referrer=SellerCopy
The heating and cooling heat pump is a device that transfers heat energy from a low-level heat source to a high-level heat source, and is also a new energy technology that has attracted a lot of attention worldwide. It differs from the well-known mechanical equipment, which can increase the potential energy"Pumps"; A heat pump usually first extracts inferior heat energy from natural air, water or earth, then performs work by electricity, and then provides people with available energy that can be used. of high quality thermal energy.
What is the working medium of the heating and cooling heat pump?
What role does the heating and cooling heat pump play?
What do you know about heating and cooling heat pumps?
The working medium of the heating and cooling heat pump used to be Freon, but since Freon adversely affects the Earth's atmospheric ozone to protect the Earth's ecological environment, in addition to improving the cooling coefficient of the heat pump and effective use, science is also committed to new technologies in various countries. With the development of quality, the working fluid was used as a replacement for Freon. However, the work equipment of most Chinese manufacturers today is still R22, and the era of using environmentally friendly work equipment R417A and 134A has not yet arrived. Some countries, such as Japan, have taken the lead in using CO2 as a working medium to avoid damaging the ozone layer. (Therefore, the copper pipes must be firmly connected during installation to prevent R22 from leaking.) In addition, the above R22, R417A, 134A and CO2 do not harm the human body. Even if there is a leak, all the equipment is still safe.
The low temperature heat sources normally used in heat pumps for heating and cooling are the media around us. Air, river water, seawater, municipal wastewater, surface water, groundwater, treated water, fire pits or working fluids, which are discharged from industrial production plants these working fluids often have similar temperatures to the surrounding medium. The operating principle of the heating and cooling heat pump is the same as that of the compression chiller. In order to fully exploit its efficiency, the small air conditioner is cooled with the same equipment in summer or heated in winter. When heating in winter, the evaporator and condenser in the air conditioning system are exchanged via a switching valve.
Heat pumps for heating and cooling are an intelligent, efficient and versatile solution for year-round heating, cooling and hot water supply solutions. In addition to their flexibility and wide application, they are energy efficient and environmentally friendly, with advanced EVI technology and green refrigerant R32/R410A. So you can enjoy a comfortable home and save energy at the same time.
JNOD insisted on developing with technological innovation, it had several nationally famous technicians and had invented several product patents. The company has strictly implemented the international ISO quality management system, and the products are of reliable guaranteed quality.
In fact, the working principle of the Heat Pump Hot Water Heater does not differ significantly from the working principle of our air conditioning system. However, our household air conditioners use the cold end (evaporator) of the cooling circuit system; In contrast, heat pumps use the hot end (condenser) of the circulatory system.
What is the spring of air simultaneous heating and cooling heat pump for homes?
How does the Heat Pump Hot Water Heater provide hot water?
What is the current market situation for Heat Pump Hot Water Heaters?
● Brushless DC inverter fan motor
The speed of the fan motor was increased by 45% and the silence of 35 dB was reached.
● Working at extremely low temperature
The inverter compressor can run stably at extremely low temperatures.
● Adaptive thermostat technology of ±1℃
The user feels more comfortable with small temperature fluctuations.
The basic principle of heat pump water heater: It mainly consists of compressor, heat exchanger, axial fan, heat storage water tank, water pump, liquid storage, filter, electronic expansion valve and electronic automatic control. After switching on the power supply, the axial fan starts running, the outside air flows through the evaporator for heat exchange, and the reduced temperature air is expelled from the system by the fan. A kind of low pressure working medium gas is compressed into high temperature and high pressure gas and fed to the capacitor. The water forcibly circulated by the water pump also passes through the condenser and is heated by the working medium and fed to the consumer for use. The working medium is cooled to a liquid and the liquid expands. After the valve is throttled and cooled, it flows back into the evaporator. This cycle works repeatedly, and the heat energy in the air is continuously "pumped" into the water, so that the water temperature in the water tank for heat preservation gradually rises and finally reaches about 55°C, which is just suitable for people to take a bath.
Heat pump water heaters are a new thing on the market, and consumer awareness of this is still very low. There are many people who think that it is impossible to get three parts heat with one part heat, and the same applies to other products related to the application of heat recovery technology, although the popularity of heat pump air conditioners was very high.
People's understanding is limited only to the fact that air conditioning is a large electricity consumer, but they do not know that it is more energy-saving than the coal-fired ball furnace. As some larger shopping malls have not yet sold air-powered water heaters, consumer awareness of air-powered water heaters is still very low.
In order to meet these growing requirements, Guangdong JNOD New Energy Technology Co., LTD. has various heat pump water heaters, which allow to increase the products and make them more effective, reliable and consistent.