Forced Air Air Heating And Cooling Heat Pump- China Manufacturers Factory Suppliers

Heating and Cooling Heat Pump installs a four-way reversing valve on the basis of ordinary air conditioners, and changes the operation of the valve, which can exchange the functions of the evaporator and the condenser of the original air conditioner, so as to change the function of cooling indoor air. Changed to the function of heating indoor air.

What are the structural advantages of the Heating and Cooling Heat Pump?

What is the user's experience with Heating and Cooling Heat Pump?

Why the use of Heating and Cooling Heat Pump can save resources?

What are the structural advantages of the Heating and Cooling Heat Pump?

The evaporator of the Heating and Cooling Heat Pump adopts the method of countercurrent heat exchange for heat exchange to enhance the heat exchange effect; moreover, the heat exchange method combining fins and tube bundles is used, and each row of heat exchange tubes is arranged in a cross. The method of turbulence increases the convective heat transfer coefficient on the exhaust side and enhances the heat transfer effect;

The refrigerant tube bundle of Heating and Cooling Heat Pump is made of red copper, and the fins are made of hydrophilic aluminum foil. The condensed water in the exhausted air drips on the surface of the heat exchanger to form a water film that is conducive to heat exchange, increasing the heat exchange coefficient and enhancing the heat exchange effect;

The Heating and Cooling Heat Pump has an advanced microcomputer control system, and adopts a special programmable controller PLC for imported air-conditioning equipment, which has the ability to resist electromagnetic interference, intelligent coupling between building load and unit heating; Display, fault alarm and diagnosis functions.

What is the user's experience with Heating and Cooling Heat Pump?

The Heating and Cooling Heat Pumpis also very comfortable, clean and safe. In the past, when burning coal, it was not only dirty, tiring and troublesome, but also the temperature was not high, usually 14-16 degrees, and you had to wear cotton-padded clothes at home. Now open to 18 degrees and wear a thin sweater. If the weather is cold, turn up the temperature. Anyway, the Heating and Cooling Heat Pump is also very convenient, and you can adjust the temperature by pressing a button.

Why the use of Heating and Cooling Heat Pump can save resources?

The Heating and Cooling Heat Pump unit has the dual functions of supplying cold water in summer and supplying hot water in winter. Using air as the heat source and cooling source can greatly save water and avoid the pollution of water quality. The air-cooled modular cold and hot water unit can be placed on the top floor of the building or on the outdoor platform to work, eliminating the need for a dedicated cold source machine room and boiler room.

JNOD focuses on heat pump& electric boiler R&D, manufactures and provides comprehensive energy-saving solutions. Our sales team have extensive experience of overseas markets. We provide sincere and professional services, including OEM/ODM/project services, technology support, market analysis, usage of design and composition of installation.

In fact, the working principle of the Heat Pump Hot Water Heater does not differ significantly from the working principle of our air conditioning system. However, our household air conditioners use the cold end (evaporator) of the cooling circuit system; In contrast, heat pumps use the hot end (condenser) of the circulatory system.

What is the spring of air simultaneous heating and cooling heat pump for homes?

How does the Heat Pump Hot Water Heater provide hot water?

What is the current market situation for Heat Pump Hot Water Heaters?

What is the spring of air simultaneous heating and cooling heat pump for homes?

● Brushless DC inverter fan motor

The speed of the fan motor was increased by 45% and the silence of 35 dB was reached.

● Working at extremely low temperature

The inverter compressor can run stably at extremely low temperatures.

● Adaptive thermostat technology of ±1℃

The user feels more comfortable with small temperature fluctuations.

How does the Heat Pump Hot Water Heater provide hot water?

The basic principle of heat pump water heater: It mainly consists of compressor, heat exchanger, axial fan, heat storage water tank, water pump, liquid storage, filter, electronic expansion valve and electronic automatic control. After switching on the power supply, the axial fan starts running, the outside air flows through the evaporator for heat exchange, and the reduced temperature air is expelled from the system by the fan. A kind of low pressure working medium gas is compressed into high temperature and high pressure gas and fed to the capacitor. The water forcibly circulated by the water pump also passes through the condenser and is heated by the working medium and fed to the consumer for use. The working medium is cooled to a liquid and the liquid expands. After the valve is throttled and cooled, it flows back into the evaporator. This cycle works repeatedly, and the heat energy in the air is continuously "pumped" into the water, so that the water temperature in the water tank for heat preservation gradually rises and finally reaches about 55°C, which is just suitable for people to take a bath.

What is the current market situation for Heat Pump Hot Water Heaters?

Heat pump water heaters are a new thing on the market, and consumer awareness of this is still very low. There are many people who think that it is impossible to get three parts heat with one part heat, and the same applies to other products related to the application of heat recovery technology, although the popularity of heat pump air conditioners was very high.

People's understanding is limited only to the fact that air conditioning is a large electricity consumer, but they do not know that it is more energy-saving than the coal-fired ball furnace. As some larger shopping malls have not yet sold air-powered water heaters, consumer awareness of air-powered water heaters is still very low.

In order to meet these growing requirements, Guangdong JNOD New Energy Technology Co., LTD. has various heat pump water heaters, which allow to increase the products and make them more effective, reliable and consistent.

Mother’s Day is a holiday honoring motherhood that is observed in different forms throughout the world. In the United States, Mother’s Day 2022 will occur on Sunday, May 8.

Of all the relationships known to humans, there is one that effortlessly outperforms everything else. It's the relationship that a mother and her children share. It's truly valuable because nothing can come close to a mother's unending love, dedication, and devotion to her children. From the time a child is born, the mother fiercely ensures that the young ones feel protected at all times around her and shapes their personality to make them battle all odds in life. Mother's Day is celebrated to recognize the contributions of all mothers.

History and significance

Mother's Day is a special day for all mothers, whose contributions are often overlooked. It's a day to acknowledge the unquantifiable and selfless contributions of every mother in her children's success. It is also a day to thank her for that.

Celebrations

Irrespective of whenever this day is celebrated across the world, people try to make sure that their mother is happy and enjoys her life. They surprise her with gifts or take her out for dinner or even cook for her at home.

With the widely known advantages of air energy heat pump products such as cleanliness, environmental protection, energy saving, stability and comfort, heating with Heating and Cooling Heat Pump products has become a trend. More and more northern == home users and schools, hotels, hospitals When transforming the original heating system in other places, choose to use Heating and Cooling Heat Pump.

Compared with ordinary central air conditioning refrigeration and gas wall-hung boiler heating, what are the advantages of Heating and Cooling Heat Pump?

What are the advantages of using the Heating and Cooling Heat Pump?

What is the working principle of Heating and Cooling Heat Pump?

Compared with ordinary central air conditioning refrigeration and gas wall-hung boiler heating, what are the advantages of Heating and Cooling Heat Pump?

The common heating and cooling equipment on the market is mainly fluorine system heating and cooling air conditioning or the combination of gas wall-hung boiler heating and central air conditioning refrigeration.

The main advantage of Heating and Cooling Heat Pump compared to ordinary heating and cooling air conditioners is high comfort. The fluorine system heating and cooling air conditioner directly controls the indoor temperature through the flow of the refrigerant, and the refrigerant directly exchanges heat with the air. This heat exchange method has two disadvantages: First, the temperature of the air outlet of the air conditioner is very low or very high (7°C-12°C during cooling, 40°C-50°C during heating), the body feels very bad, and it is bitingly cold in summer. The winter is hot and dry; second, although the fluorine system air conditioner has a relatively fast cooling and heating speed, it will also cause a large amount of moisture in the air to be taken away due to the rapid heating and cooling speed, resulting in excessive indoor dehumidification and drying.

What are the advantages of using the Heating and Cooling Heat Pump?

1) The unit of Heating and Cooling Heat Pump has high energy efficiency ratio, energy saving and electricity saving.

2) The water temperature of the Heating and Cooling Heat Pump is generally constant at 12-22°C, which is 7°C for the water supply in summer, 12°C for the return water, 45°C for the water supply in winter, and 40°C for the return water, and the temperature difference between them is small. , so the unit has less work and more energy.

What is the working principle of Heating and Cooling Heat Pump?

During the operation of Heating and Cooling Heat Pump, the evaporator absorbs heat from the ambient heat energy in the air to evaporate the heat transfer working medium. After the working medium vapor is compressed by the compressor, the pressure and temperature rise. When the high-temperature vapor passes through the special annular pipe bonded on the outer surface of the water storage tank, the condenser condenses into liquid and transfers the heat to the water in the water storage tank of air source heat pump.

Guangdong JNOD New Energy Technology Co., LTD. has focused on the development and production of Heating and Cooling Heat Pumps for several years. And it commits to providing perfect service for every customer from all over the world.

Winter has arrived, and people tend to use heat pumps as heating machines. If the heat pump unit can be installed reasonably, the service life and heating capacity of the heat pump will be improved. Let Jnod tell you how to install it, see below:

1. Unit installation location planning

1) The installation requirements of the heat pump main unit are similar to the installation requirements of the outdoor unit of the air conditioner. It can be installed on the roof, balcony, and ground. The air outlet should avoid the windward direction.

2) The distance between the main unit (wind from the side) and the surrounding walls or other obstructions should not be too small. There should be no obstructions within 1 meter of the air outlet, and ensure that the heat exhaustion and suction of the heat exchanger are not hindered.

3) There should be no obstructions within 1 meter of the air inlet of the main unit (top air outlet), and no obstructions within 2 meters of the air outlet to ensure that the heat exhaustion and suction of the heat exchanger of the main unit are not hindered.

When the unit is installed under the eaves or there are horizontal obstacles above the unit, the installation location of the unit must be in a well-ventilated place, otherwise it is easy to short-circuit the air flow, resulting in poor heat dissipation capacity of the unit.

2. Unit installation environment control

1) Try not to place it in direct sunlight.

2) Not on the window sill of the bedroom or near the bedroom.

3) There is enough distance between the air inlet and outlet to facilitate heat dissipation.

4) Places that can withstand more than 2-3 times the weight of the outdoor unit.

5) A place where there is no oily smoke or other corrosive gas.

6) A place that does not affect other factors or the environment.

How time flies, the first quarter of 2022 will soon pass. Do you have any new plans for your business? JNOD has developed some new creative products including electric boiler, heat pump and water heaters. In order to thank new and old customers, we will hold an Alibaba online live stream show on March 11, from 8:00-10:00 pm Beijing time. Big discount and promotions are available during the show time. Welcome to join us.

Here's the link to watch our show：

https://www.alibaba.com/live/promotions-for-newly-developed-boiler-and_139230dd-0e7d-4ea5-8f6a-e91d94aa08fa.html?referrer=SellerCopy

With the continuous improvement of living standards, there are more and more users of heating and central air conditioning. Central heating users do not need to worry about the choice of equipment, while household heating users need to face a dazzling array of hot and cold equipment, which is difficult to carry out. choose. Heating and Cooling Heat Pumps are constantly entering the public's field of vision, and are sought after by many users because of their environmental protection and energy-saving features. But what else should you know before choosing a Heating and Cooling Heat Pump?

How energy efficient is the Heating and Cooling Heat Pump?

How to save resources when cooling with Heating and Cooling Heat Pump?

How to save resources when heating with Heating and Cooling Heat Pump?

How energy efficient is the Heating and Cooling Heat Pump?

The Heating and Cooling Heat Pumpcan adjust the indoor temperature by absorbing the heat energy in the air and then transferring it to the water for heat exchange. In summer, it is cooled by fan coil unit, and in winter, it is heated by fan coil unit, floor heating or radiator. It has a dual-purpose function. Heating and Cooling Heat Pump can also be connected in areas with better environment. Domestic hot water, and even the water heater are saved.

How to save resources when cooling with Heating and Cooling Heat Pump?

Heating and Cooling Heat Pumprefrigeration is to cool the circulating water in the pipeline into chilled water through the heat pump unit. The outlet air temperature of the indoor fan coil is between 15°C and 20°C. The chilled water is circulated into the room for heat exchange, and the evaporator The heat absorption in the room transfers the heat in the room to the circulating water in the pipeline, and then the circulating water after the heat absorption is brought to the heat exchanger configured by the heat pump unit through the operation of the water pump for heat exchange, and finally the heat pump host discharges the heat to the air In the cycle, this process is repeated to achieve the effect of indoor cooling. However, it should be noted that after the circulating water in the pipeline is cooled by the Heating and Cooling Heat Pump, the temperature can be kept stable for a long time without heat exchange, and there is no short-term loss of cooling capacity. Energy consumption will also be lower.

How to save resources when heating with Heating and Cooling Heat Pump?

Heating and Cooling Heat Pump heating is to replace the collected heat into the heating pipeline through the heat pump unit, and then deliver the water to the floor heating, fan coil and radiator at 35°C-45°C, 40°C-50°C and 55°C respectively. The heat is released in the middle, so as to achieve the effect of indoor heating. Because the air energy heat pump adopts frequency conversion technology and jet enthalpy increasing technology, it has a high energy efficiency ratio, and can obtain more than three times the heat energy from the low temperature environment, and the energy saving performance will be much higher than that of direct conversion of electric energy into heat energy.

After reading, do you have a deeper understanding of Heating and Cooling Heat Pump? For further information, please contact Guangdong JNOD New Energy Technology Co., LTD. They will be very pleased to help you!

A heat pump is part of a heating and cooling system and is installed outside your home. Like an air conditioner, it can cool your home, but it’s also capable of providing heat.

An air-source heat pump works by transferring heat from the outside air to an indoor space. A fan draws in air from outside and transfers it to an evaporator, which is situated in the heat pump. A refrigerant circulates inside the pump, which changes its physical state and evaporates even at low temperatures. The refrigerant steam needs to be raised to a level where it can be used for your heating and hot water, so it’s compressed using a compressor. The heat produced in this process is transferred to the heating and hot water systems in your home.

In cooling mode, a heat pump absorbs heat inside your home and releases it outdoors. In heating mode, the heat pump absorbs heat from the ground or outside air (even cold air) and releases it indoors.

If you want to make your home even more eco-friendly, you could install JNOD heating & cooling heat pump, we have both R32 and R410A inverter model,.The heating capacity can be made from 10KW to 26KW, All-in-one & Monoblock type are available. This will help you to reduce your energy bills and your carbon footprint.

If you have any more questions, please contact us for get more details.

2022-4-16 · The reversible heat pump has been a standard design for all climates where air conditioning is essential. In 2003, Europe experienced the hottest summer in 200 years. Even …

Inverter swimming pool heat pump is featured with intelligence, whisper quiet operation and energy efficiency, which can be powerful in performance and green in energy. Model: …

Heat pump water heaters (HPWH) are well-positioned to reduce water heating loads in homes with electric resistance water heaters. HPWHs are ENERGY STAR qualified and use 60-70% less energy than electric resistance water heaters, saving …

See our range of Swimming Pool and Spa Heating

Rheem MPi Series All In One Heat Pump Water Heater Capable of producing hot water up to 60°C for residential and light commercial domestic water heating application Utilises multi-pass heating of the water Whisper technology enables quieter operation Click to Learn about this Product View Documents Rheem RHP Series All in One Heat Pump Water Heater

FOR ALL YOUR HEAT PUMP REPAIRS, MAINTENANCE

2022-11-16 · Our range of swimming pool heat pumps offer sustainable and dynamic heating for indoor and outdoor swimming pools of any size. Working at temperatures as low as -15°C, they …

Air To Water Inverter Heat Pump suitable for Underfloor Heating 1.More cost saving inverter Compressor,can running at -15 deg c . 2.Accurate temperature control，lower noise and more …