











There are 2 different ways an air source heat pump can provide heat in your home: by heating the air in the rooms or by heating the water in the central heating system, but which option is best for your home? We've compared these different heat pumps, to help you find out.
As the name suggests, air-to-water heat pumps use the ambient air outside of a property to heat the water in the central heating system. They are the more frequently seen air source heat pumps on the market, and come with several benefits and disadvantages.
Benefits of an air-to-water heat pump
Air-to-water heat pumps come with several benefits when compared to air-to-air heat pumps.
Compatible with traditional central heating systems
According to the English Housing Survey 2019-2020, 90% of households in the UK have central heating with radiators as their main heat source. That means, unless you're among the select few, you are going to want an air source heat pump that's compatible with your existing central heating system. Air-to-water heat pumps are designed with this very purpose in mind. Air-to-air heat pumps are not compatible.
Easier to install
As the air-to-water heat pumps will generally connect directly to the central heating system they are usually a lot easier to install than air-to-air heat pumps. Installing an air-to-water heat pump in a property with existing central heating is similar to replacing a boiler, whereas installing an air-to-air heat pump would require the installation of air ducts throughout the property.
Not just for heating
Although air source heat pumps are mainly considered for heating properties, that isn't the only thing they do. Air-to-water heat pumps will heat the water in your property for your central heating, but can also be combined with a hot water storage tank to provide hot running water too.
Disadvantages of an air-to-water heat pump
Air-to-water heat pumps don't just come with benefits, there are some disadvantages too.
More expensive
Air-to-water heat pumps are not cheap. Depending on the size of the unit you need and which manufacturer you pick, you could end up paying more than £10,000 for an air-to-water heat pump, excluding the cost of installation.
In comparison, you can get some air-to-air heat pumps for less than £1,000. Even if the cost of installation is high, you could still spend less on getting an air-to-air heat pump installed than you would on just buying the parts for an air-to-water heat pump.
Requires more space
In addition to the space a hot water storage tank would take up to allow for hot running water, due to radiators being required, air-to-water heat pumps still take up more room in the property than air-to-air heat pumps do. This isn't much of a problem if you already have radiators installed, but to maximize space in a new property air to air heat pumps are the better option.
In what sounds like a much simpler process, air-to-air heat pumps extract heat from the ambient air outside of a property and transfer it to the air inside of a property. If you'd like more detail on how air source heat pumps work, have a look at the following article: What is an air source heat pump?
Benefits of an air-to-air heat pump
There are several benefits to having an air-to-air heat pump rather than an air-to-water heat pump.
Heat and cool
As the air to air heat pumps is essentially air conditioning units that are capable of heating a property, they can also be used to cool a property when the weather is hot. Many manufacturers refer to them as climate control solutions because they aren't just for heating a property, they can cool it too.
Save space
Air-to-air heat pumps may require the installation of air ducts throughout the property, but once they have been installed, each room will feel more spacious. This is because there is no need for radiators which take up wall room and floor space. For newer, less spacious properties, air-to-air heat pumps could help you make the most of your space.
Less expensive
As mentioned earlier, air-to-air heat pump units are considerably cheaper than their air-to-water counterparts. Some air-to-water units can be 10 times more expensive than an air-to-air unit, which is something to think about.
Disadvantages of an air-to-air heat pump
Air-to-air heat pumps don't just come with benefits when compared to air-to-water heat pumps, there are some disadvantages too.
Not compatible with traditional central heating systems
If you have an existing central heating system and want to replace a gas boiler with an air-source heat pump, air-to-air heat pumps are not for you. As they only heat the air in a property, they cannot be connected to the central heating system and are completely incompatible.
Higher installation costs
Although like-for-like installation costs for both types of heat pump are generally quite similar, unless you have a property with existing air conditioning ducting, the cost of installing an air-to-air heat pump is likely to be higher as there will be more work to do.
No hot water
Air-to-air heat pumps do not heat the water in a property. This means you will need a secondary source of heat to provide hot running water throughout your home. While this is possible through solar power and other water heating solutions, it is still a separate cost that is avoided when installing an air-to-water heat pump.
Having learned the advantages and disadvantages of these air source heat pumps, you should now be able to make a decision on which would be best suited to your circumstances. However, as there is a lot to consider when getting an air source heat pump installed, we would recommend seeking the advice of a local heating engineer. They can ensure you get the right solution for your home's unique circumstances. Fortunately, we can help you find qualified engineers in your area, who will provide you with free, no-obligation quotes.
The heat pump water heaterabsorbs the low-temperature heat in the air, vaporizes the cold medium, and then compresses it through the compressor to increase the temperature, and then converts it through the heat exchanger to heat the water, and the compressed high-temperature heat energy is used to heat the water temperature.
What is the difference between a heat pump water heater and an air conditioner?
What are the advantages of heat pump water heater and compared with gas water heater?
What are the advantages of heat pump water heater compared to electric water heater?
When a general air conditioner is refrigerating, it absorbs the heat in the room through the phase change of the refrigerant in the evaporator (liquid to gas), and then realizes cooling through the heat release of the outdoor condenser. His heat exchange equipment is mainly finned heat exchangers. The heat pump water heater converts the low-grade energy in the air into high-grade energy that we can use. The heat is obtained by absorbing heat from the air through the phase change (endothermic) of the refrigerant in the evaporator, and then releasing heat through the indoor condenser (or jacket heat exchanger). This is his heating state. Its cooling is the same as that of general air conditioners, except that the heat exchanger may be different. General air conditioners use ordinary finned heat exchangers.
Gas water heaters heat the water temperature by burning combustible gas, and at the same time, will produce greenhouse gases such as carbon dioxide. If the continuous large amount of carbon dioxide on the earth exists in the air for a long time, it will produce a greenhouse effect on the earth's environment! The heat pump water heater only heats the water temperature with the heat in the air, and will not emit any toxic and harmful gases. In the era of energy saving and emission reduction, it is a water heater that is truly energy-saving and environmentally friendly. Secondly, gas water heaters may leak gas and cause human carbon monoxide poisoning accidents. Therefore, the safety of empty heat pump water heater is better than that of gas water heater.
We can compare heat pump water heater with electric water heater. Electric water heaters are heated with electric heating rods. The heat pump water heater heats the water temperature by absorbing heat from the air. The heat generated by the heat pump water heater consumes 1 kWh of electricity equivalent to the heat generated by the electric water heater consuming 4 kWh of electricity. In terms of energy saving, heat pump water heaters are far more energy efficient than electric water heaters. Second, in terms of security. The heat pump water heater just transfers the heat after compression heating to the water tank for heating, so the water and electricity are completely isolated. The electric water heater electric heating rod is directly heated in the water. Therefore, leakage accidents are easy to occur!
Guangdong JNOD New Energy Technology Co., LTD. is committed to providing customers the best hot water & heating solutions with our heat pump products, focusing on the latest technologies, strive for outstanding quality in our products and customer service.
Guangdong JNOD New Energy Technology Co., LTD. focusing on heat pump& electric boiler R&D, manufacturing and providing comprehensive energy-saving solutions.
JNOD has a complete heat pump industry chain, and its products involves Swimming Pool Heat Pump, House Heating & Cooling Heat Pump, Domestic Hot Water Heat Pump, Heat Pump Dehumidifier, Commercial & Industrial High Temperature Water Heating Solution, Industrial and Agricultural Heat Pump Dryer,etc.The ultra-low temperature EVI heat pump has been widely used, too.
JNOD insisted on developing with technology innovation, it possessed of several national famous technicians and had invented multiply product patents. The company has been strictly implement the ISO international quality management system, and the products are of reliable guaranteed quality.
We are committed to providing customers the best hot water & heating solutions with our heat pump products, focusing on the latest technologies, strive for outstanding quality in our products and customer service.
With the continuous improvement of living standards, there are more and more users of heating and central air conditioning. Central heating users do not need to worry about the choice of equipment, while household heating users need to face a dazzling array of hot and cold equipment, which is difficult to carry out. choose. Heating and Cooling Heat Pumps are constantly entering the public's field of vision, and are sought after by many users because of their environmental protection and energy-saving features. But what else should you know before choosing a Heating and Cooling Heat Pump?
How energy efficient is the Heating and Cooling Heat Pump?
How to save resources when cooling with Heating and Cooling Heat Pump?
How to save resources when heating with Heating and Cooling Heat Pump?
The Heating and Cooling Heat Pumpcan adjust the indoor temperature by absorbing the heat energy in the air and then transferring it to the water for heat exchange. In summer, it is cooled by fan coil unit, and in winter, it is heated by fan coil unit, floor heating or radiator. It has a dual-purpose function. Heating and Cooling Heat Pump can also be connected in areas with better environment. Domestic hot water, and even the water heater are saved.
Heating and Cooling Heat Pumprefrigeration is to cool the circulating water in the pipeline into chilled water through the heat pump unit. The outlet air temperature of the indoor fan coil is between 15°C and 20°C. The chilled water is circulated into the room for heat exchange, and the evaporator The heat absorption in the room transfers the heat in the room to the circulating water in the pipeline, and then the circulating water after the heat absorption is brought to the heat exchanger configured by the heat pump unit through the operation of the water pump for heat exchange, and finally the heat pump host discharges the heat to the air In the cycle, this process is repeated to achieve the effect of indoor cooling. However, it should be noted that after the circulating water in the pipeline is cooled by the Heating and Cooling Heat Pump, the temperature can be kept stable for a long time without heat exchange, and there is no short-term loss of cooling capacity. Energy consumption will also be lower.
Heating and Cooling Heat Pump heating is to replace the collected heat into the heating pipeline through the heat pump unit, and then deliver the water to the floor heating, fan coil and radiator at 35°C-45°C, 40°C-50°C and 55°C respectively. The heat is released in the middle, so as to achieve the effect of indoor heating. Because the air energy heat pump adopts frequency conversion technology and jet enthalpy increasing technology, it has a high energy efficiency ratio, and can obtain more than three times the heat energy from the low temperature environment, and the energy saving performance will be much higher than that of direct conversion of electric energy into heat energy.
After reading, do you have a deeper understanding of Heating and Cooling Heat Pump? For further information, please contact Guangdong JNOD New Energy Technology Co., LTD. They will be very pleased to help you!
A swimming pool heat pump works to keep a constant pool temperature and extend the swimming season. Over the past years, it has stood out from other similar products such as boilers and the electric water heater and gained a growing market share. According to Arizton’s report, the pool heat pump market is expected to grow at a CAGR of over 5% during 2019−2025. Why does the pool heat pump become increasingly popular?
1. The rising economy and preference for swimming
Swimming has a long history and has been very favorable in the western world like North America, Europe, and Australia. It is assumed that the heat pump segment will increase stably in the foreign market owing to the consumption habit formed decades ago. Over the past few years, the thriving economy has made people out of western world more favorable for this sport. The Asia Pacific (APAC) region is expected to grow at a CAGR of around 6% in terms of revenues with a rise in swimming pool construction, high disposable income, and growth in awareness. As people enjoy a higher living standard and the group of villas-resident booms, the heated pool which can protect the privacy and bring better life quality, becomes a must for them.
2. A wave of home workouts during the pandemic, an engine for the private pool economy
During the Covid-19 pandemic, consumers have to stay at home and cannot go to the beach or public swimming pools, so private pools and hot tubs have met a wave of demand. And heat pumps also benefit from the fad. By its core competitiveness and the prosperous market, the heat pump one day will take the lead in the pool industry.
3.Energy efficiency and Cost-effectiveness
Known as one of the most energy-efficient pool heating options available, the heat pump is an “energy sipper” in comparison to other options. While electric heaters will use resistors and gas heaters burn fuel, heat pumps generate heat from ambient air, meaning it harvest heat from the air around it. The tiny amount of energy a heat pump uses to compress and convert is nothing compared to the amount of energy other heating options use.It’s greatly save energy and cut down your electricity bill.
4. Eco-Friendly
When you use a gas heater you are relying on combustion of the fuel. They continually burn gas in order to produce heat. This process comes with environmental consequences by emitting CO2 that destroys our ozone layer. A heat pump, however, does not burn anything and pull minimal electricity to harvest ambient air, and produces zero CO2 emissions.
5. Durability
Like any investment, you want your pool and all of its moving parts to last for years to come. Gas and electric heaters will only allow for 5-10 years max of usage and any repairs you might need on them will break the bank. A heat pump is built with longevity in mind and at a minimum will last 10-20 years, and with proper maintenance can last even longer.
It's no doubt an ideal choice for the green lifestyle, right?
Please feel free to contact our JNOD sales team when you need a swimming pool heat pump.OEM and ODM project are acceptable.
Email: info@jnodboiler.com Phone: +86-757-23617848
heating and cooling heat pump integrates air conditioning and heating systems, is comfortable and energy-saving, and will surely lead the market trend of comfortable home life in the future.
How exactly does the heating and cooling heat pump work?
What is the basic principle of heating and cooling heat pump?
Will the floor height affect the installation of the heating and cooling heat pump?
The common heating and cooling heat pumps on the market are almost all of combined cooling and heating, which solves the problems of cooling in summer and heating in winter through a set of equipment. In some specific areas (the temperature is relatively high in winter), the air energy heat pump can also be connected to the domestic hot water tank to provide 24-hour uninterrupted hot water for the family, so the air energy heat pump can be used for cooling and heating, as well as cooling and heating. And with domestic hot water, but in order not to affect the heating effect, the domestic hot water is generally not combined.
Basic principle of heating and cooling heat pump: it is mainly composed of compressor, heat exchanger, axial fan, thermal insulation water tank, water pump, liquid storage tank, filter, electronic expansion valve and electronic automatic controller. After the power is turned on, the axial flow fan starts to operate. The outdoor air is heat exchanged through the evaporator. The air with reduced temperature is discharged from the system by the fan. At the same time, the working medium inside the evaporator is sucked into the compressor. The compressor compresses the low-pressure working medium gas into high-temperature and high-pressure gas and sends it to the condenser. The water forcibly circulated by the water pump also passes through the condenser and is heated by the working medium and sent to the user for use, The working medium is cooled into liquid, which flows into the evaporator again after throttling and cooling by the expansion valve. In this way, the heat energy in the air is continuously "pumped" into the water, so that the water temperature in the insulation water tank gradually rises to about 55 ℃, which is just suitable for people to take a bath. This is the basic working principle of heating and cooling heat pump.
The floor height problem, many people think that the floor height of the elevator apartment is relatively low, and the installation of heating and cooling heat pump will cause the room to become depressed, but in fact, the installation of heating and cooling heat pump will not have much impact on the floor height. , The concealment of central air-conditioning can reduce the sense of oppression of the floor height through the reasonable planning of the ceiling, and the floor heating can also be laid by dry floor heating. The floor height is only increased by 3-4 cm, and the user cannot distinguish it with the naked eye.
Guangdong JNOD New Energy Technology Co., LTD. is the leading manufacturer sofa manufacturer specializing in heating and cooling heat pump. If you want to get more information, just go and connect them.
Swimming Pool Heat Pump is equipped with high-quality brand scroll compressors, with stable operation, low vibration, low noise, and low failure rate; key components such as thermal expansion valves, electronic appliances, etc. are well-known brand components with reliable performance.
How to choose a truly eco-friendly Swimming Pool Heat Pump?
What is the function of the Swimming Pool Heat Pump damping system?
Why choose an energy-efficient Swimming Pool Heat Pump?
The initial heating determines the model selection. The real energy saving stage of the Swimming Pool Heat Pump depends on the "constant temperature" period.
Select frequency conversion, more energy saving, the key to Swimming Pool Heat Pump lies in the operation logic of frequency conversion technology. In the constant temperature stage, the frequency conversion technology can enable the equipment to operate intelligently at a low frequency and match the real-time heating demand. There is no need to continuously heat the pool water by repeatedly starting and stopping like a fixed-frequency heat pump, so as to achieve the purpose of energy saving. We can compare the energy saving performance of fixed frequency heat pump and variable frequency heat pump under the same conditions.
Due to the difference in temperature, the heating efficiency of the heat pump will also be different. To compare the energy-saving effect in the constant temperature stage, we chose a fixed-frequency heat pump with the same heating level as the variable-frequency heat pump (IPHC150T) selected in the previous step at an air temperature of 26 °C (26 °C is generally used as the test temperature in the laboratory). Frequency selection is 60kw.
① The independent suspension shock absorption system makes the fan and motor run more quietly and reduces the noise caused by air disturbance.
② An integral base carries the fan and the motor, and according to the load-bearing distribution of each part, different types and quantities of shock absorbers are correspondingly configured to avoid jumping, anti-vibration and resonance, and make the operation of the fan and the motor more stable.
③ The fan and the box are isolated by flexible connection to avoid vibration transmission.
Considering indoor air quality, Swimming Pool Heat Pump is equipped with fresh air treatment function and exhaust function.
Considering the operating cost of the constant temperature heat removal pump unit, the Swimming Pool Heat Pump can use a large amount of outdoor low-humidity fresh air to adjust the humidity of the indoor air in spring and autumn, reducing operating costs.
In order to prevent the circulating air from affecting the service life of the Swimming Pool Heat Pump, the key components and sheet metal structure of the equipment are treated with anti-corrosion during the manufacturing process, and the compressor, power distribution cabinet and control system are isolated from the wind system.
Guangdong JNOD New Energy Technology Co., LTD. is committed to providing customers the best hot water & heating solutions with our heat pump products, focusing on the latest technologies, strive for outstanding quality in our products and customer service.
So, what is a heat pump?
A heat pump is part of a home heating and cooling system and is installed outside your home. Like an air conditioner such as central air, it can cool your home, but it’s also capable of providing heat. In cooler months, a heat pump pulls heat from the cold outdoor air and transfers it indoors, and in warmer months, it pulls heat out of indoor air to cool your home. They are powered by electricity and transfer heat using refrigerant to provide comfort all year round. Because they handle both cooling and heating, homeowners may not need to install separate systems to heat their homes. In colder climates, an electric heat strip can be added to the indoor fan coil for additional capabilities. Heat pumps do not burn fossil fuel like furnaces do, making them more environmentally friendly.
Also with water tank inside, it can provide DHW for your kitchen and bathroom.
To achieve heating for our house, there are total three kinds of heat pump we manufacture for our customer. They are:
1. Swimming pool heat pump;
2. Hot water heat pump;
3. Multi function heat pump (heating, cooling & DHW)
Homeowners in need of a new heating or cooling system, may consider the type of climate they live in before purchasing a heat pump system. Heat pumps are more common in milder climates, where the temperature does not typically drop below freezing. In colder regions, they can also be combined with EVI system for energy-efficient heating on all but the coldest days.
JNOD are using R134a, R410a, R32 & R290 on our heat pump products. We have range from 10kw to 32kw. Product type are with monoblock & split.
Learn more about our products on website: https://www.jnodheatpump.com