inverter heat pump water heater- Manufacturers Factory Suppliers From China

During the working process of the heat pump water heater, it consumes 1-part electricity to get the compressor running, and at the same time, it can absorb about 4-part heat from the ambient air and transfer it to the water. Therefore, air energy water heaters can save almost 3/4 electricity compared to electric water heaters. That is, the electric water heater consumes 4 kWh electricity to produce hot water, and the air energy water heater requires only 1 kWh electricity.

What role does the refrigerant play in the unit composition of the heat pump water heater?

What is the physical principle of how a heat pump water heater works?

What is the significance of the appearance of heat pump water heaters?

What role does the refrigerant play in the unit composition of the heat pump water heater?

The heat pump unit contains a special heat-absorbing refrigerant. In the liquefied state, the normal temperature is below minus 20°C. Therefore, there is a temperature difference between it and the outside temperature. The refrigerant absorbs the outside temperature and is stored in the evaporator. Generate pressure and evaporate and evaporate, and through the work of the heat exchanger (heat pump), when the refrigerant is transferred from the evaporated state to the liquefied state, the objectively existing heat is released to the storage water in the water tank.

What is the physical principle of how a heat pump water heater works?

The heat pump water heateruses the heat absorbing medium (refrigerant) in the device to collect heat energy from the air or the natural environment, heats the cold water quickly through the heat exchanger and at the same time releases the cold air, avoiding the lack that conventional solar products can not work in rainy weather and at night. As long as the outside temperature is above 1-15 degrees, it can work normally, so can be more efficient and energy-saving, at the same time does not occupy open space, and is easy to install and flexible to use.

What is the significance of the appearance of heat pump water heaters?

With the rapid development of the economy and the improvement of people's living standards, water heating has become a necessity for people's lives. However, conventional electric water heaters have the disadvantages of large energy consumption, high cost and serious environmental pollution; while the operation of energy-saving and environmentally friendly solar water heaters is also restricted due to weather conditions. The heating principle of the air heat pump is different from that of the conventional solar water heater. The air heat pump uses air, water, solar energy, etc. as a low temperature heat source, and the air heat pump uses the electrical energy as energy to absorb heat from the low temperature side to heat the service water.

Guangdong JNOD New Energy Technology Co., LTD. can provide product certification requirements for local markets; provision of catalogues, technical manuals; exhibit together with customers at leading industrial fairs; Advertise in local market media through our press release resources.

1. Eco Friendly

Compared to the on/off heat pump, inverter heat pump is much friendlier to the environment owing to their sudden fluctuation detection capabilities and automatic adjustments made to the compressor speed. This highly sophisticated yet innovative mechanism helps save energy, providing benefits to the environment.

2. Energy Efficient and save money

The inverter technology is considered a perfect solution when it comes to energy-efficiency and economical operation. In an inverter model from a heat pump inverter manufacturer, the cooling and heating are automated in an energy-efficient and seamless manner whereas earlier technologies used to consume a lot of electricity irrespective of the required usage.This will be good to cut-off your electricity bill.

3. Soundless operation

The compressor motor used by DC inverter heat pump manufacturer does not turn on and off all the time but keeps working at low power. This kind of machine makes the operation more quite.
Unlike non-inverters, they don't automatically turn on and off every time they reach a certain temperature; instead, they just cruise along maintaining and regulating the temperature constantly.

4. Long Life

The technology and hardware employed in DC inverter model by DC inverter heat pump supplier not only makes the cooling and heating effect more efficient, but also makes the unit last longer. Contrary to the operation of a non-inverter unit, the inverter uses less power and as a result, they work less, meaning that they are less prone to wear and tear.

5. Faster Cooling/Heating

The DC inverter heat pump is able to cool and heat your room faster than its non-inverter counterpart. This is due to the fact that an inverter heat pump unit operates on a variable speed compressor rather than at a fixed speed one. This process ensures rapid air conditioning effects via faster variable speed allowing the compressor to run at full power only when required while constantly regulating the temperature as per end user's desire.

6. Smart Capabilities

A smart DC Inverter heat pump will provide you complete control over energy consumption and usage through your PC and portable smart devices. Moreover, it will give you complete insights about all technical metrics such as watts, voltages, current and units consumed. A smart heat pump also lets the user schedule the heat pump to automatically turn itself on or off. Operations of a heat pump are more flexible and centralized when it is smart.

Please feel free to contact our JNOD sales team when you get more information.

With the continuous improvement of social and economic level, my country's air energy industry has ushered in a period of rapid development, and the scope of application of Swimming Pool Heat Pump products is also expanding. With the advantages of safety, energy saving and constant temperature, Swimming Pool Heat Pump has gradually become a better choice for swimming pools, gymnasiums, bathing centers and other places to solve the problem of constant temperature heating.

How does the Swimming Pool Heat Pump work?

What are the features of Swimming Pool Heat Pump?

Why choose the right Swimming Pool Heat Pump?

How does the Swimming Pool Heat Pump work?

Swimming Pool Heat Pump is a new type of high-efficiency energy-saving constant temperature heating equipment. It is a device that uses a small amount of electricity to drive heat from a low-temperature heat source to a high-temperature heat source based on the basic principle of reversed Carnot cycle. During operation, 1 part of energy is consumed, and 4 parts of energy (heat) are absorbed and transferred from the ambient air to the water, which saves 3/4 of the electricity compared to the water heater.

What are the features of Swimming Pool Heat Pump?

1. Swimming Pool Heat Pump, using advanced titanium alloy heat exchanger, has strong internal corrosion and can resist the erosion of chloride ions in water.

2. Swimming Pool Heat Pump is flexible in design and easy to install: integral design, beautiful and compact unit, small installation area.

3. The Swimming Pool Heat Pump project is easy to install, and the operation and maintenance costs are low.

4. The energy efficiency ratio of Swimming Pool Heat Pump is as high as 5.0, leading the industry.

5. Swimming Pool Heat Pump, using international environmentally friendly refrigerants (R410A/R417A), energy saving and environmental protection, no pollution to the environment.

6.Swimming Pool Heat Pump, super quiet, provide comfortable temperature.

Why choose the right Swimming Pool Heat Pump?

From "heating is too slow", "heating can't keep up with heat dissipation, the constant temperature feeling is useless", and even "the equipment uses electricity and does not dare to open it often", these problems may be caused by the wrong selection of Swimming Pool Heat Pumps. Therefore, when choosing a suitable Swimming Pool Heat Pump for a swimming pool, we must scientifically evaluate the required heating capacity of the swimming pool in the two stages of initial heating and constant temperature, and choose the one with greater demand as the basis for matching selection.

Under normal circumstances, the heating amount in the initial heating stage of the swimming pool will be higher than that in the constant temperature stage. Therefore, the first step in the selection of Swimming Pool Heat Pump is to understand the heating capacity required for the initial heating of the swimming pool.

JNOD has a complete heat pump industry chain, and its products involve Swimming Pool Heat Pump, House Heating & Cooling Heat Pump, Domestic Hot Water Heat Pump, Heat Pump Dehumidifier, Commercial & Industrial High Temperature Water Heating Solution, Industrial and Agricultural Heat Pump Dryer, etc.

More and more people choose heat pump water heatersbecause air energy is the most energy-efficient, that is, the lowest operating cost, compared to most water heaters that consume electricity and gas.

How does the heat pump water heater achieve the effect of saving energy?

What should we pay attention to when using heat pump water heater?

What are the operational advantages of heat pump water heaters?

How does the heat pump water heater achieve the effect of saving energy?

When the heat pump water heater is working, the energy QA stored in the ambient medium is absorbed in the evaporator; it consumes a part of the energy itself, that is, the compressor consumes power QB; the heat release QC is carried out in the condenser through the working fluid circulation system, QC=QA+QB, it can be seen that the energy output by the heat pump is the work QB done by the compressor and the heat QA absorbed by the heat pump from the environment; therefore, the use of heat pump technology can save a lot of electric energy.

What should we pay attention to when using heat pump water heater?

temperature, water consumption

Put the bath water in the heat pump water heater. The most suitable water temperature is 42°C. It can be slightly higher by 1-2°C for middle-aged and elderly people. The water for showering is about 40~50 liters per person. Bathtubs and Jacuzzis are determined by capacity.

How much hot water can be made

In terms of product performance and theory, the heat pump water heater can be cycled back and forth to continuously produce hot water. Under normal temperature, the hot water can be produced per hour as follows (45℃-55℃): It depends on the size of the unit.

What are the operational advantages of heat pump water heaters?

The heat pump water heater absorbs the low-temperature heat in the air, vaporizes it through the fluorine medium, and then compresses it through the compressor to heat up and pressurize it. The air energy water heater has the characteristics of high efficiency and energy saving. The same amount of hot water produced is 4-6 times that of the electric water heater. Its annual average thermal efficiency ratio is 4 times that of the electric heating, and the energy efficiency is high.

The heat pump water heater overcomes the shortcomings of solar water heaters that rely on sunlight for heating and inconvenient installation. Since the work of the air energy water heater is to exchange heat through the medium, it does not need the electric heating element to be in direct contact with the water, which avoids the danger of electric water heater leakage, and also prevents the gas water heater from the danger of explosion and poisoning, and more effectively controls the gas Air Pollution Caused by Exhaust Gases from Water Heaters.

Guangdong JNOD New Energy Technology Co., LTD. has focused on the field of heat pump water heaters for many years, it commits to providing perfect service for every customer in the world.

The iterative upgrade of technology has brought more possibilities and greater imagination to the swimming pool equipment industry. This is the case with the application of air energy technology. With the continuous advancement of the dual-carbon strategy, the emergence of Heating and Cooling Heat Pump not only refreshes people's experience, but also redefines the effect of energy saving and consumption reduction.

What changes can Heating and Cooling Heat Pump bring to consumers' lives?

Can the Heating and Cooling Heat Pump provide continuous heating?

What is the running cost of Heating and Cooling Heat Pump?

What changes can Heating and Cooling Heat Pump bring to consumers' lives?

Heating and Cooling Heat Pump is a kind of air-conditioning water heater equipment that uses air as a cold (heat) source to provide air conditioning, heating and domestic hot water to indoor spaces.

There are five operating modes for the Heating and Cooling Heat Pump. The cooling and cooling heating water modes can be operated in summer; the heating and heating heating water modes can be operated in winter; the hot water mode can be operated separately in excessive seasons, so as to provide cooling, dehumidification, heating and domestic hot water to the living environment throughout the year. When the unit operates in the cooling and heating water mode, it can achieve full heat recovery, the total two-way energy efficiency ratio is above 7.0, and the domestic hot water is completely free.

Can the Heating and Cooling Heat Pump provide continuous heating?

Continuity Analysis of Heating and Cooling Heat Pump

Heating and Cooling Heat Pump heating and traditional solar heating are usually equipped with a water tank to store heat for indoor heating. However, the air energy heat pump can absorb low temperature heat energy from the low temperature environment, and then convert it into high temperature heat energy through the compressor, so as to This can continuously supply heating and hot water to meet indoor heating needs. However, when solar heating is insufficient in sunlight, it is difficult to heat the heating circulating water in the water tank, especially at night and in bad weather, the indoor heating effect will inevitably be affected.

What is the running cost of Heating and Cooling Heat Pump?

When the outdoor light conditions are good, the operating cost of solar heating will be lower than that of Heating and Cooling Heat Pump, after all, the heat source mainly comes from free sunlight. However, at night and in rainy, windy and snowy weather, the thermal efficiency of the electric auxiliary heating used in solar heating equipment is much lower than that of Heating and Cooling Heat Pump heating equipment. Especially in winter, rainy, windy and snowy weather occupies most of the time. Therefore, if solar heating wants to get a good heating effect, it must pay more energy.

Guangdong JNOD New Energy Technology Co., LTD. has full experience in the field of energy products for more than 13 years. JNOD has kept growing rapidly during these years since it was established. In 2020, more than 60% of our heat pump products were exported to Europe, North America , Middle East, Australia, and other developed regions.

How time flies, the first quarter of 2022 will soon pass. Do you have any new plans for your business? JNOD has developed some new creative products including electric boiler, heat pump and water heaters. In order to thank new and old customers, we will hold an Alibaba online live stream show on March 11, from 8:00-10:00 pm Beijing time. Big discount and promotions are available during the show time. Welcome to join us.

Here's the link to watch our show：

https://www.alibaba.com/live/promotions-for-newly-developed-boiler-and_139230dd-0e7d-4ea5-8f6a-e91d94aa08fa.html?referrer=SellerCopy

The heat pump water heater absorbs air energy through the compressor, releases heat through the refrigerant and then heats the hot water. In general, it is a purely electric or boiler fuel, and the air source is supposed to transfer the energy of the air to the water through a certain amount of electrical energy. It is cost effective and has low operating cost. That's the most important thing. heat pump water heaters are safer, more energy-saving, more environmentally friendly, safer and fashionable than ordinary water heaters.

What is the basic working principle of a heat pump water heater?

What are the advantages of heat pump water heater and solar water heater?

Heating and cooling heat pump can be connected to Wi-Fi?

What is the basic working principle of a heat pump water heater?

Heat pump water heater mainly consists of compressor, heat exchanger, axial fan, water tank for heat preservation, water pump, liquid storage, filter, electronic expansion valve and electronic automatic control. After switching on the power supply, the axial fan starts running, the outside air flows through the evaporator for heat exchange, and the reduced temperature air is expelled from the system by the fan. A kind of low pressure working medium gas is compressed into high temperature and high pressure gas and fed to the capacitor. The water forcibly circulated by the water pump also passes through the condenser and is heated by the working medium and fed to the consumer for use. The working medium is cooled to a liquid and the liquid expands. After the valve is throttled and cooled, it flows back into the evaporator. This cycle works repeatedly, and the heat energy in the air is continuously "pumped" into the water, so that the water temperature in the water tank for heat preservation gradually rises and finally reaches about 55°C, which is just suitable for people to take a bath.

What are the advantages of heat pump water heater and solar water heater?

Both work with air and solar energy, two of nature's renewable energy sources. What's the difference between the two?

In all seasons, even in winter, the effect of solar water heaters is very clear with sufficient sunlight, as well as on long rainy, snow and cloudy days. Solar water heaters cannot reflect the heating effect. The heat pump water heater is not affected by weather and season. It can supply hot water to users at any time. To be clear: The air flow heater can have hot water where there is air!

Heating and cooling heat pump can be connected to Wi-Fi?

Wifi Monoblock High performance heat pump for heating and cooling, we offer not only advanced energy efficient heat pumps with advanced inverter technology, but also a total solution for heating, cooling and hot water supply in private homes. It has the WiFi remote. The heating and cooling heat pump can be controlled via Wi-Fi, allowing users to operate their heat pumps anytime, anywhere.

Guangdong JNOD New Energy Technology Co., LTD. can manufacture standard products under customers' brand, modify the products to meet customers' personalized requirements, and cooperate with customers to design and manufacture completely new products.

The operating principle of heat pump water heaters is very similar to that of air conditioning systems. It consumes a small amount of electrical energy to get the compressor running. The working fluid is compressed by the compressor into a liquid state with high temperature and high pressure, and then enters the condenser to release heat to heat the water. By circulating and heating in this way, the water can be heated from 50°C to 65°C.

What are the main components of heat pump water heaters?

How does the heat pump water heater work?

Why should the heat pump water heater be green?

What are the main components of heat pump water heaters?

Four main components of refrigeration technology: evaporator, compressor, condenser and throttling device.

Three stable parts: liquid storage tank (compressor), expansion valve (capillary tube), dry filter (filtering water and impurities)

A large piece of defrosting: four-way valve

Break through traditional energy conversion theory to achieve high energy efficiency:

When operating the heat pump, the working medium in the evaporator can absorb the energy QA stored in the ambient medium;

And starting the system must consume energy, that is, the power consumption of the QB compressor;

At the same time, the heat emitted from the working medium to the high temperature medium in the condenser is QC;

After the compressor input work starts the system, the mechanical kinetic energy becomes thermal energy. The energy output of the heat pump is thus the sum of the work done by the compressor QB and the heat absorbed by the heat pump from the environment QA; Enter a QB to get QB+QA and break the traditional bottleneck that conversion between different energies cannot achieve full efficiency; Heat pump technology is more energy efficient.

How does the heat pump water heater work?

heat pump water heaters work according to the "reverse carnotic" principle, specifically the "outdoor unit" as a heat exchanger absorbs heat from the outside air, heats the low boiling working medium (refrigerant) and evaporates it, and the refrigerant vapor The water is compressed and heated by the compressor and enters the water tank, and the water in which the heat is released is condensed and liquefied and then throttled and pressurized to return to the outer heat exchanger to enter the next circuit. The heat pump water heater simply absorbs the heat in the air to heat the water, and the air that has absorbed the heat can also be used in the kitchen to solve the problem of stuffy heat.

Why should the heat pump water heater be green?

The heat pump water heater has energy saving functions.

The biggest advantage of the heat pump water heater is undoubtedly the energy saving. The low-temperature thermal energy in the air is converted into high-temperature thermal energy by the compressor. Based on the same amount of hot water generation, the energy saving is maximized compared to the water heater with electric heating, and the cost of use is only 1/4 of the cost of electric water heater. Compared to gas water heaters, it consumes no gas fuel and the cost of use is only 1/3 of the cost of gas water heaters. heat pump water heaters take air as the main body and save energy, which not only saves people's usage cost, but also corresponds to the main body of energy saving in the world. This is one of the biggest highlights of air energy water heaters.

Guangdong JNOD New Energy Technology Co., LTD. Focus on research and development of heat pumps and electric boilers, manufacturing and providing comprehensive energy saving solutions.

Heating and Cooling Heat Pump has the characteristics of comfort, energy saving, stability, environmental protection, safety, long service life, wide application range and one machine dual use in actual use, which makes Heating and Cooling Heat Pump more popular,favored by users.

What are the advantages of Heating and Cooling Heat Pump?

Why are more and more consumers choosing Heating and Cooling Heat Pump?

What installation conditions are the Heating and Cooling Heat Pump suitable for?

What are the advantages of Heating and Cooling Heat Pump?

1. Safe operation and environmental protection

Heating and Cooling Heat Pump adopts the form of heat pump heating, water and electricity are completely separated, no coal or natural gas is needed, and it will not pollute the environment, and there is no need to worry about the leakage of refrigerant to pollute the environment.

2. Flexible and unlimited use

Heating and Cooling Heat Pump Compared with solar, gas, water ground source heat pumps, air source heat pumps are not limited by geology and gas supply, and are not affected by bad weather such as night, cloudy, rain and snow, so they can Realize safe operation 24 hours a day throughout the year.

3. Energy-saving technology, power saving and worry-free

Heating and Cooling Heat Pump is efficient and environmentally friendly. Compared with electric heating, it saves 75% of electricity bills per month, saving users considerable electricity bills.

Why are more and more consumers choosing Heating and Cooling Heat Pump?

Heating and Cooling Heat Pump can use floor heating as the heating end when heating. The comfort of floor heating is well known. It conforms to the traditional Chinese medicine theory of warm feet and cool top, giving people a feeling of warm feet and cool head. And the upper pass, the room is warm and cool, giving people a natural and comfortable feeling. Of course, radiators and fan coil units can also be selected at the end of indoor heating (when the water supply temperature is 35°C-45°C, the indoor floor heating can be used as the end; when the water supply temperature is 40°C-50°C, the indoor fan coil can be used as the end. The end; when the water temperature is above 55℃, the radiator can be used as the end in the room).

What installation conditions are the Heating and Cooling Heat Pump suitable for?

The main unit of the Heating and Cooling Heat Pump is similar to the outdoor unit of the central air conditioner, and can be installed in the outdoor unit of the central air conditioner, and the air energy heat pump has the functions of cooling and heating, as long as sufficient ventilation and ventilation environment is ensured, for other installations conditions are relatively low. However, when considering the installation factors of solar heating equipment, it is especially necessary to pay attention to the lighting conditions. It is difficult for ordinary elevator apartments to find suitable installation conditions.

For more information about Heating and Cooling Heat Pump, please contact Guangdong JNOD New Energy Technology Co., LTD., Ltd. has committed to providing the increasing of Heating and Cooling Heat Pump, and make them more effective, reliable, and consistent.

Swimming Pool Heat Pump is equipped with high-quality brand scroll compressors, with stable operation, low vibration, low noise, and low failure rate; key components such as thermal expansion valves, electronic appliances, etc. are well-known brand components with reliable performance.

How to choose a truly eco-friendly Swimming Pool Heat Pump?

What is the function of the Swimming Pool Heat Pump damping system?

Why choose an energy-efficient Swimming Pool Heat Pump?

How to choose a truly eco-friendly Swimming Pool Heat Pump?

The initial heating determines the model selection. The real energy saving stage of the Swimming Pool Heat Pump depends on the "constant temperature" period.

Select frequency conversion, more energy saving, the key to Swimming Pool Heat Pump lies in the operation logic of frequency conversion technology. In the constant temperature stage, the frequency conversion technology can enable the equipment to operate intelligently at a low frequency and match the real-time heating demand. There is no need to continuously heat the pool water by repeatedly starting and stopping like a fixed-frequency heat pump, so as to achieve the purpose of energy saving. We can compare the energy saving performance of fixed frequency heat pump and variable frequency heat pump under the same conditions.

Due to the difference in temperature, the heating efficiency of the heat pump will also be different. To compare the energy-saving effect in the constant temperature stage, we chose a fixed-frequency heat pump with the same heating level as the variable-frequency heat pump (IPHC150T) selected in the previous step at an air temperature of 26 °C (26 °C is generally used as the test temperature in the laboratory). Frequency selection is 60kw.

What is the function of the Swimming Pool Heat Pump damping system?

① The independent suspension shock absorption system makes the fan and motor run more quietly and reduces the noise caused by air disturbance.

② An integral base carries the fan and the motor, and according to the load-bearing distribution of each part, different types and quantities of shock absorbers are correspondingly configured to avoid jumping, anti-vibration and resonance, and make the operation of the fan and the motor more stable.

③ The fan and the box are isolated by flexible connection to avoid vibration transmission.

Why choose an energy-efficient Swimming Pool Heat Pump?

Considering indoor air quality, Swimming Pool Heat Pump is equipped with fresh air treatment function and exhaust function.

Considering the operating cost of the constant temperature heat removal pump unit, the Swimming Pool Heat Pump can use a large amount of outdoor low-humidity fresh air to adjust the humidity of the indoor air in spring and autumn, reducing operating costs.

In order to prevent the circulating air from affecting the service life of the Swimming Pool Heat Pump, the key components and sheet metal structure of the equipment are treated with anti-corrosion during the manufacturing process, and the compressor, power distribution cabinet and control system are isolated from the wind system.

Guangdong JNOD New Energy Technology Co., LTD. is committed to providing customers the best hot water & heating solutions with our heat pump products, focusing on the latest technologies, strive for outstanding quality in our products and customer service.

How time flies, the first quarter of 2022 will soon pass. Do you have any new plans for your business? JNOD has developed some new creative products including electric boiler, heat pump and water heaters. In order to thank new and old customers, we will hold an Alibaba online live stream show on March 11, from 8:00-10:00 pm Beijing time. Big discount and promotions are available during the show time. Welcome to join us.

Here's the link to watch our show：

https://www.alibaba.com/live/promotions-for-newly-developed-boiler-and_139230dd-0e7d-4ea5-8f6a-e91d94aa08fa.html?referrer=SellerCopy

More and more people choose heat pump water heatersbecause air energy is the most energy-efficient, that is, the lowest operating cost, compared to most water heaters that consume electricity and gas.

How does the heat pump water heater achieve the effect of saving energy?

What should we pay attention to when using heat pump water heater?

What are the operational advantages of heat pump water heaters?

How does the heat pump water heater achieve the effect of saving energy?

When the heat pump water heater is working, the energy QA stored in the ambient medium is absorbed in the evaporator; it consumes a part of the energy itself, that is, the compressor consumes power QB; the heat release QC is carried out in the condenser through the working fluid circulation system, QC=QA+QB, it can be seen that the energy output by the heat pump is the work QB done by the compressor and the heat QA absorbed by the heat pump from the environment; therefore, the use of heat pump technology can save a lot of electric energy.

What should we pay attention to when using heat pump water heater?

temperature, water consumption

Put the bath water in the heat pump water heater. The most suitable water temperature is 42°C. It can be slightly higher by 1-2°C for middle-aged and elderly people. The water for showering is about 40~50 liters per person. Bathtubs and Jacuzzis are determined by capacity.

How much hot water can be made

In terms of product performance and theory, the heat pump water heater can be cycled back and forth to continuously produce hot water. Under normal temperature, the hot water can be produced per hour as follows (45℃-55℃): It depends on the size of the unit.

What are the operational advantages of heat pump water heaters?

The heat pump water heater absorbs the low-temperature heat in the air, vaporizes it through the fluorine medium, and then compresses it through the compressor to heat up and pressurize it. The air energy water heater has the characteristics of high efficiency and energy saving. The same amount of hot water produced is 4-6 times that of the electric water heater. Its annual average thermal efficiency ratio is 4 times that of the electric heating, and the energy efficiency is high.

The heat pump water heater overcomes the shortcomings of solar water heaters that rely on sunlight for heating and inconvenient installation. Since the work of the air energy water heater is to exchange heat through the medium, it does not need the electric heating element to be in direct contact with the water, which avoids the danger of electric water heater leakage, and also prevents the gas water heater from the danger of explosion and poisoning, and more effectively controls the gas Air Pollution Caused by Exhaust Gases from Water Heaters.

Guangdong JNOD New Energy Technology Co., LTD. has focused on the field of heat pump water heaters for many years, it commits to providing perfect service for every customer in the world.

Swimming Pool Heat Pump is used to maintain the temperature of swimming pool water. Swimming Pool Heat Pump, because the indoor swimming pool generally maintains the water temperature at 26℃~28℃ and the air temperature at 28℃~30℃ (the air temperature is 1℃~2℃ higher than the water temperature).

What is the reason for the continued popularity of the Swimming Pool Heat Pump?

Why is Swimming Pool Heat Pump in demand?

What metrics should be considered for Swimming Pool Heat Pump?

What is the reason for the continued popularity of the Swimming Pool Heat Pump?

Not only swimming pools, but also from hotels to fitness clubs, heated swimming pools are becoming more and more indispensable, and the power consumption of constant temperature heating equipment has become one of the power consumption concerns of swimming pool owners, and its operating cost should not be underestimated.

Faced with the phenomenon that the market is in short supply, for many swimming pool owners who are eager to generate income, how to improve the energy efficiency utilization rate of the swimming pool constant temperature heat pump, ensure the efficient operation of the swimming pool in the low temperature climate, extend the popularity to the four seasons, and realize the full swimming pool. Annual business has become a key upgrade direction.

Why is Swimming Pool Heat Pump in demand?

Since the water temperature of indoor swimming pools is generally kept at 26°C~28°C, and the air temperature is kept at 28°C~30°C (the air temperature is 1°C~2°C higher than the water temperature), for lighting needs, the walls are mostly glass walls or glass structures. Because the pool water contains a lot of chlorine, with the continuous evaporation of the water in the pool, the air humidity is high, and the humid air causes a lot of condensation on the walls or glass, which is bound to cause strong corrosion to the interior decoration of the building. In addition, because humid air contains a large number of viruses, bacteria and other elements that reduce air quality, it can make it difficult for people to breathe, so indoor swimming pool temperature and humidity control are getting more and more attention. Swimming Pool Heat Pump has also attracted the attention of consumers.

What metrics should be considered for Swimming Pool Heat Pump?

Swimming Pool Heat Pump considers indoor air quality, and the constant temperature heat removal pump unit is equipped with fresh air treatment function and exhaust air function.

Swimming Pool Heat Pump considers the operating cost of the constant temperature heat removal pump unit. In the spring and autumn, a large amount of outdoor low-humidity fresh air can be used to adjust the humidity of the indoor air to reduce the operating cost.

In order to prevent the circulating air from affecting the service life of the equipment, the key components and sheet metal structure of the Swimming Pool Heat Pump are treated with anti-corrosion during the manufacturing process, and the compressor, power distribution cabinet and control system are isolated from the wind system.

After reading, do you have a deeper understanding of Swimming Pool Heat Pump? For further information, please contact Guangdong JNOD New Energy Technology Co., LTD.

A swimming pool heat pump works to keep a constant pool temperature and extend the swimming season. According to Arizton’s report, the pool heat pump market is expected to grow at a CAGR of over 5% during 2019−2025.

JNOD has our swimming pool heat pump to meet the market request.

For the swimming pool heat pump,we have the:

Residential on/off swimming pool heat pump,we can make the heating capacity from 3KW to 25kw.

Residential inverter swimming pool heat pump,we can make the heating capacity from 5kw to 28kw.

We can have the R32 and R410A model,we can make both plastic and metal out case.

It’s with 4 ways valve,provide both heating and cooling mode to create more possibility for pool enjoyment.The high performance, energy-efficient pool heat pump quietly and economically allows you to swim comfortably throughout the year!

Some customers may ask what’s the different between Residential on/off and inverter swimming pool heat pump.

It is very similar to the concept of air conditioning inverter technology.

On/Off is defined as “all or nothing “,the input power or the heating capacity keeps the same.

For the inverter system ,Unlike ON/OFF heat pump with single-speed compressor which by switching on and off periodically to adjust the performance of the heating & cooling, full inverter heat pump uses a variable speed compressor which can automatically adjust the output needed at the lowest consumption of power and maintain the best temperature at different climatic conditions. When the heating demand is high, the inverter compressor and the fan motor will start running at a high speed, inversely, they will run at a low speed.

The advantages included:

1.Achieve an extremely high COP.

2.Shorten heating time.

3.Greatly save energy and cut down electricity bill.

4.Contribute to a quiet neighbor environment.

Some customer told me,their swimming pool is not very big.

Here come a mini swimming pool heat pump will be suitable for you.

We have both 3KW and 5KW heating capacity model.

The mini heat pump is designed for above-ground pools.It’s light and easy to install,can be portable every where.Equipped with a plug & play power connection.

Besides the Residential swimming pool heat pump model,we also have the commercial swimming pool heat pump with full inverter technology meets your comfort needs coupled with energy-efficient operation, which is applied in commercial settings, including water parks, hotels, gyms, and so on.

OEM and ODM project are acceptable.Just contact JNOD sales team to get more information.

So, what is a heat pump?

A heat pump is part of a home heating and cooling system and is installed outside your home. Like an air conditioner such as central air, it can cool your home, but it’s also capable of providing heat. In cooler months, a heat pump pulls heat from the cold outdoor air and transfers it indoors, and in warmer months, it pulls heat out of indoor air to cool your home. They are powered by electricity and transfer heat using refrigerant to provide comfort all year round. Because they handle both cooling and heating, homeowners may not need to install separate systems to heat their homes. In colder climates, an electric heat strip can be added to the indoor fan coil for additional capabilities. Heat pumps do not burn fossil fuel like furnaces do, making them more environmentally friendly.

Also with water tank inside, it can provide DHW for your kitchen and bathroom.

To achieve heating for our house, there are total three kinds of heat pump we manufacture for our customer. They are:

1. Swimming pool heat pump;

2. Hot water heat pump;

3. Multi function heat pump (heating, cooling & DHW)

WHERE DO HEAT PUMPS WORK BEST?

Homeowners in need of a new heating or cooling system, may consider the type of climate they live in before purchasing a heat pump system. Heat pumps are more common in milder climates, where the temperature does not typically drop below freezing. In colder regions, they can also be combined with EVI system for energy-efficient heating on all but the coldest days.

JNOD are using R134a, R410a, R32 & R290 on our heat pump products. We have range from 10kw to 32kw. Product type are with monoblock & split.

Learn more about our products on website: https://www.jnodheatpump.com

Heating and Cooling Heat Pump uses scientific methods to make low-temperature heat energy flow to high-temperature heat energy according to the "inverse Carnot principle", and obtains more heat energy from the air, which has wide adaptability.

How does the Heating and Cooling Heat Pump cycle for cooling and heating?

What is the principle of Heating and Cooling Heat Pump?

Can the Heating and Cooling Heat Pump still operate at an ambient temperature of 0°C?

How does the Heating and Cooling Heat Pump cycle for cooling and heating?

During heating, the refrigerant (environmentally friendly refrigerant) in the Heating and Cooling Heat Pump host will absorb the low-temperature heat energy in the air through the evaporator, and then convert it into high-temperature heat energy through the compressor, and then transfer the heat energy to the heating circulating water through the heat exchanger. Finally, the heated hot water is transported to the indoor heating terminal for heat dissipation through the water pump, and then returned to the heat exchanger for heating after the heat dissipation, and the process is repeated.

During cooling, the cycle of the Heating and Cooling Heat Pump system is just the opposite, absorbing the indoor heat and transferring it to the outdoors. Air heat exchange, an additional heat exchange program.

What is the principle of Heating and Cooling Heat Pump?

Shallow water sources on the earth's surface (generally within 1000 meters), such as groundwater, surface rivers, lakes and oceans, absorb considerable radiant energy from the sun into the earth, and the temperature of water sources is generally very stable. The working principle of Heating and Cooling Heat Pump is to realize the transfer of low-temperature heat to high-temperature by inputting a small amount of high-grade energy (such as electric energy). The water body is used as the heat source of heat pump heating in winter and the cold source of air conditioning in summer, that is, the heat in the building is "taken out" and released into the water body in summer. Because the water source temperature is low, it can efficiently take away the heat, so as to achieve the purpose of indoor cooling of the building in summer; In winter, heat energy is "extracted" from the water source and sent to the building for heating through Heating and Cooling Heat Pump.

Can the Heating and Cooling Heat Pump still operate at an ambient temperature of 0°C?

The answer is yes, although Heating and Cooling Heat Pumpproducts were mostly used in high temperature areas in the early days, with the continuous development of heat pump technology, air energy heat pump heating can be used in most areas, especially for some low temperature environments. The Heating and Cooling Heat Pump uses technologies such as jet enthalpy to ensure that the Heating and Cooling Heat Pump can operate normally in severe cold climates.

Guangdong JNOD New Energy Technology Co., LTD. has been committed to providing customers with Heating and Cooling Heat Pumps and perfect after-sales service so that customers can invest easily, use them with confidence, and have no worries.

WHAT ARE SOME ADVANTAGES OF A HEAT PUMP WATER HEATER? INSTALLING AND MAINTAINING A HEAT PUMP WATER HEATER How Do I Get Started?

Certification: SASO, RoHS, CB, CCC, CE Working Medium: R32 Heat Source Type: Air Source Heat Pump Transport Package: Wood Packing Specification: 1117x427x845 Trademark: Mango energy

2022-11-19 · Multifunction Heat Pump (Heating/ Cooling/DHW) 80℃ High Temperature Heat Pump. Evi 80°C Heat Pump; ... Hot-selling Earth Water Heat Pump - Ground / Water Source DC inverter heat pump heater chiller BGB1I-135

Cross Reference United States Residential Heat Pump Water Heaters AeroTherm Series Heat Pump (RE) with Bradford White Connect ? AeroTherm Series Heat Pump (RE)

What is Villa Family Hot Heating System Monoblock Water Heater Heat Pump, All in one water heater heat pump manufacturers

The Shuntec Heating Cooling Hot Water Monobloc Heat Pump is an all-in-one home solution that manages hot water, heating and cooling. With a single outdoor unit, Shuntec Monoloc can be …

An ENERGY STAR certified heat pump water heater is up to four times more efficient and uses up to 70% less energy, on average, than a standard electrical water heater. Saving energy saves money and reduces your carbon footprint. Key features Heat pump water heater (HPWH) technology does not generate heat directly.

2022-11-19 · ? Eco-friendly Green Refrigerant R32 ? Equipped with Inverter Technology Our inverter is an energy saving technology that efficiently controls the motor ... Multifunction Heat Pump (Heating/ Cooling/DHW) 80℃ High Temperature Heat Pump. Evi 80°C Heat Pump; Water Chiller Heat Pump ... Ground / Water Source DC inverter heat pump heater ...