











In this era of carbon neutrality and carbon peak, people began to understand the concept of environmental protection and began to implement environmental protection policies, such as the use of environmentally friendly and energy-saving products in life, etc. Even the swimming pool water treatment industry has paid more attention to the environmental protection and energy-saving performance of Swimming Pool Heat Pump.
What are the structural features of the Swimming Pool Heat Pump?
Why is Swimming Pool Heat Pump a cost-effective choice?
Why do Swimming Pool Heat Pumps need an anti-condensation system?
1. In line with environmentally sustainable development strategy
Swimming Pool Heat Pump adopts environmentally friendly R407C refrigerant fluorine-free system, which saves energy and reduces emissions, and uses free green energy without pollution.
2. Plasma sterilization, 360 purify air
The Swimming Pool Heat Pump can choose the original plasma sterilization and purification technology, which actively generates a large number of active hydroxide ions, surrounds and adsorbs the bacteria and destroys the protein structure on the surface of the bacteria, so as to achieve the effect of sterilization and purification.
Box structure of Swimming Pool Heat Pump, independent and beautiful
The panel is made of GI galvanized steel material, embedded with polyurethane (PU) fire-proof, sound-insulating and heat-insulating material, and the inside and outside are sprayed with anti-corrosion spray; , The refrigerant compression system accessories are separated from the air duct system of the heat pump independently to avoid corrosion by ammonia-containing air, ensure a longer service life of the heat pump, and facilitate disassembly and maintenance.
①Pressure protection: high pressure protection, low pressure protection, water filling protection;
②Temperature protection: Excessive exhaust temperature protection, compressor overcut protection, hot water temperature protection
③ Power protection: lack/reverse phase protection, compressor overload protection.
① The anti-condensation sensor of Swimming Pool Heat Pump can avoid condensation and condensation on the inner surface of indoor glass windows and walls. When the temperature at the indoor anti-condensation dew point is too low, the anti-condensation sensor installed in the place will fed back the information to the unit control system so that the unit can re-adjust the indoor relative humidity, so that the temperature here is higher than the dew point temperature to prevent condensation.
② If there are parts that are particularly prone to condensation and condensation in the swimming pool space, the Swimming Pool Heat Pump can be equipped with a special anti-condensation and condensation system to ensure that the temperature of the condensation-prone parts of the swimming pool is above the dew point temperature.
JNOD has a complete heat pump industry chain, and its products involve Swimming Pool Heat Pump, House Heating & Cooling Heat Pump, Domestic Hot Water Heat Pump, Heat Pump Dehumidifier, Commercial & Industrial High Temperature Water Heating Solution, Industrial and Agricultural Heat Pump Dryer, etc. The ultra-low temperature EVI heat pump has been widely used, too.
Mother’s Day is a holiday honoring motherhood that is observed in different forms throughout the world. In the United States, Mother’s Day 2022 will occur on Sunday, May 8.
Of all the relationships known to humans, there is one that effortlessly outperforms everything else. It's the relationship that a mother and her children share. It's truly valuable because nothing can come close to a mother's unending love, dedication, and devotion to her children. From the time a child is born, the mother fiercely ensures that the young ones feel protected at all times around her and shapes their personality to make them battle all odds in life. Mother's Day is celebrated to recognize the contributions of all mothers.
History and significance
Mother's Day is a special day for all mothers, whose contributions are often overlooked. It's a day to acknowledge the unquantifiable and selfless contributions of every mother in her children's success. It is also a day to thank her for that.
Celebrations
Irrespective of whenever this day is celebrated across the world, people try to make sure that their mother is happy and enjoys her life. They surprise her with gifts or take her out for dinner or even cook for her at home.
More and more people choose heat pump water heatersbecause air energy is the most energy-efficient, that is, the lowest operating cost, compared to most water heaters that consume electricity and gas.
How does the heat pump water heater achieve the effect of saving energy?
What should we pay attention to when using heat pump water heater?
What are the operational advantages of heat pump water heaters?
When the heat pump water heater is working, the energy QA stored in the ambient medium is absorbed in the evaporator; it consumes a part of the energy itself, that is, the compressor consumes power QB; the heat release QC is carried out in the condenser through the working fluid circulation system, QC=QA+QB, it can be seen that the energy output by the heat pump is the work QB done by the compressor and the heat QA absorbed by the heat pump from the environment; therefore, the use of heat pump technology can save a lot of electric energy.
temperature, water consumption
Put the bath water in the heat pump water heater. The most suitable water temperature is 42°C. It can be slightly higher by 1-2°C for middle-aged and elderly people. The water for showering is about 40~50 liters per person. Bathtubs and Jacuzzis are determined by capacity.
How much hot water can be made
In terms of product performance and theory, the heat pump water heater can be cycled back and forth to continuously produce hot water. Under normal temperature, the hot water can be produced per hour as follows (45℃-55℃): It depends on the size of the unit.
The heat pump water heater absorbs the low-temperature heat in the air, vaporizes it through the fluorine medium, and then compresses it through the compressor to heat up and pressurize it. The air energy water heater has the characteristics of high efficiency and energy saving. The same amount of hot water produced is 4-6 times that of the electric water heater. Its annual average thermal efficiency ratio is 4 times that of the electric heating, and the energy efficiency is high.
The heat pump water heater overcomes the shortcomings of solar water heaters that rely on sunlight for heating and inconvenient installation. Since the work of the air energy water heater is to exchange heat through the medium, it does not need the electric heating element to be in direct contact with the water, which avoids the danger of electric water heater leakage, and also prevents the gas water heater from the danger of explosion and poisoning, and more effectively controls the gas Air Pollution Caused by Exhaust Gases from Water Heaters.
Guangdong JNOD New Energy Technology Co., LTD. has focused on the field of heat pump water heaters for many years, it commits to providing perfect service for every customer in the world.
With the Super September on Alibaba we will be here with you on our live steam show on Sept 16th 0:00 Beijing Time.
This time will be mainly promote to you our newest product to support you in the energy war. Both our heat pump and electric boiler are high efficiency and energy saving.
A big discount up to 10% will be shared during the show.
Welcome to join us and feel free to get more information on our live show.
Time: Sept 16th 0:00 & Sept 22nd 0:00 Beijing Time.
Link & QR code:
https://www.alibaba.com/live/hottest-trending-electric-boiler-%2526amp%253B-heat_046ebf3a-1bef-42d4-9845-c638bcd7056d.html?referrer=SellerCopy
Swimming Pool Heat Pump is mainly used in constant temperature swimming pools, hot springs, saunas, foot baths, bathhouses, private villas and other constant temperature heating pools. It operates fully automatically, and its modular design is suitable for applications in various functions.
What is the advance in the Swimming Pool Heat Pump?
Why choose Swimming Pool Heat Pump?
How should the heating capacity of the Swimming Pool Heat Pump be obtained?
What are the advantages of Swimming Pool Heat Pump?
Swimming Pool Heat Pump has the characteristics of multi-function, energy saving and consumption reduction. The Swimming Pool Heat Pump in the swimming pool can not only recover the heat lost from the evaporation of the pool water through the constant temperature dehumidification heat pump during the dehumidification and air conditioning operation, but also reuse this part of the free heat to heat the pool water and air to make up for the pool water and air. The heat loss of the indoor swimming pool can be achieved to achieve the purpose of energy saving and cost reduction in the indoor swimming pool. There is also optional plasma sterilization and purification device to purify the air in an all-round way to create a fresh, clean and healthy indoor air environment.
Swimming Pool Heat Pump only requires the user to set parameters such as space target temperature, pool target water temperature, space target humidity, and space carbon dioxide target concentration, and then select the automatic mode. With the priority level set by the program, the automatic operation meet all the requirements required by the user. Swimming Pool Heat Pump has stable operation, safety and environmental protection, and the average cost saving is 40%~60%, and the energy saving effect is obvious. Swimming Pool Heat Pump is suitable for large swimming pools, such as gymnasiums, athlete training halls, water entertainment and leisure places, etc. The three-in-one heat pump cabinet type is suitable for new and renovated indoor swimming pool projects such as private swimming pools, senior club swimming pools, hotels, etc.
1. The basic situation of the swimming pool (area, water depth, indoor or outdoor, and the following will take indoor as an example)
2. The temperature of the place (initial water temperature, wind speed on the water surface of the pool, local atmospheric pressure, etc.)
3. Set the target temperature for heating (26℃~28℃)
4. The heat loss caused during the heat transfer process includes: the heat lost by evaporation on the surface of the pool water, the heat lost by conduction from the pool wall and the bottom of the pool, and the heat lost by pipes and equipment.
JNOD which has insisted on developing with technology innovation possessed several national famous technicians and had invented multiply product patents. The company has been strictly implementing the ISO international quality management system, and the products are of reliable guaranteed quality.
The Heating and Cooling Heat Pump is driven by an electric motor, uses the heat in the air as a low-temperature heat source, exchanges heat through the air conditioner condenser or evaporator, and then passes through the circulation system to extract or release heat energy, and use the unit circulation system to transfer the energy to the building. It can meet the needs of users for domestic hot water, floor heating or air conditioning.
What is the cycle between the Heating and Cooling Heat Pump and the natural environment?
What is the principle of Heating and Cooling Heat Pump?
Does the Heating and Cooling Heat Pump make noise?
The compressor outlet of the Heating and Cooling Heat Pump is high-temperature and high-pressure gas, which is transformed into a high-pressure and low-temperature vapor-liquid mixture through the heat exchange of the condenser. The low-temperature gas enters the evaporator to evaporate and absorb heat, and absorb the low-grade heat energy from the outside world (which can be rivers, lakes, groundwater, underground soil layers, air, etc., which we call water source, ground source, and air source heat pump), and finally the evaporator comes out. The low pressure gas enters the compressor to complete the cycle.
Heating and Cooling Heat Pump is an evolved product of air conditioners. An electromagnetic four-way valve (also known as a reversing valve) is installed in the refrigeration system. Through the switching direction of the four-way valve, the flow direction of the refrigerant is changed, and the air conditioner can hot. The high-temperature and high-pressure vapor-like refrigerant discharged from the compressor flows to the condenser in the heat preservation water tank, transfers heat to the tap water passing through the water tank, and then throttles and reduces the pressure through the expansion valve, and evaporates and absorbs heat in the evaporator of the main outdoor heat pump group. Use the working fluid to absorb the heat in the outdoor air. The Heating and Cooling Heat Pump absorbs the heat in the outdoor air and transfers it to the tap water in the insulated water tank. It is more energy-saving, fast and safe than simply heating with an electric heater, and the outdoor thermal energy potential is infinite.
Noise problem, almost all of today's Heating and Cooling Heat Pumps use full frequency conversion technology, indoor unit frequency conversion, heat pump host frequency conversion, fan frequency conversion, etc. The noise value of the heat pump host is below 45 decibels, and the indoor noise is still below 20 decibels. Neither users nor neighbors will be affected.
JNOD has a complete heat pump industry chain, and its products involve Swimming Pool Heat Pump, House Heating & Cooling Heat Pump, Domestic Hot Water Heat Pump, Heat Pump Dehumidifier, Commercial & Industrial High Temperature Water Heating Solution, Industrial and Agricultural Heat Pump Dryer, etc. The ultra-low temperature EVI heat pump has been widely used, too.
JNOD has a complete heat pump industry chain, and its products involves Swimming Pool Heat Pump, House Heating & Cooling Heat Pump, Domestic Hot Water Heat Pump, Heat Pump Dehumidifier, Commercial & Industrial High Temperature Water Heating Solution, Industrial and Agricultural Heat Pump Dryer,etc.The ultra-low temperature EVI heat pump has been widely used, too.
Air source heat pump water heaters are the same as the heating principle of air conditioners, they are all heat carriers. The air conditioner moves the outdoor heat into the room, and the air energy water heater moves the outdoor heat to the water tank to heat the cold water in the water tank. Because the heat in the air is free, the air energy water heater also saves electricity.
What is the operating mode and principle of the unit composition of the heat pump water heater?
What are the benefits of installing a heat pump water heater?
What is the difference between a heat pump water heater and an air conditioner?
The heat pump hot water unit is composed of a refrigeration cycle, including two parts: the main engine and the condenser. The main engine part includes evaporator, fan, compressor and expansion valve; the condenser is an incubator with condensing coils inside. The refrigerant absorbs the heat from the outside air in the evaporator and releases heat in the condensing coil through the heat pump cycle to heat the water in the water tank. The thermal insulation layer of the water tank is foamed with closed-cell rubber sponge or polyurethane, and has good thermal insulation performance.
1. Safety: No gas, no waste gas, and no "gas poisoning"; no electric heating rod for heating, there is no danger of leakage, and people's health and safety are protected.
2. Save money: The COP value is more than 3, the energy efficiency ratio is high, and it definitely saves electricity and money. It can save 2/3~3/4 of electricity expenses, or 1/2~2/3 of gas expenses and auxiliary heating expenses of solar water heaters.
3. Comfort: automatic constant temperature and pressure water supply, never hot and cold when using hot water, hot water has pressure, good comfort. All-weather supply of domestic hot water makes up for the embarrassment of solar energy when there is no hot water available in rainy days, nights, no sunlight, and freezing.
4. Environmental protection: The cold air discharged from the heat pump water heater is beneficial to reduce the room temperature.
Comparison of heat pump water heaters and air conditioners: The principle of heat pump water heaters and air conditioners is the same, but the technical content of heat pump water heaters is higher than that of air conditioners, which is why heat pump water heaters have only been listed in recent years. In general, heat pump water heaters are the product of the development of science and technology to a certain stage. The heat dissipation temperature of the air conditioner cannot work in an environment where the cooling temperature is 40~50°C, and the water temperature of the heat pump water heater can reach about 60°C or even higher.
Guangdong JNOD New Energy Technology Co., LTD., which has been established for several years, focuses on the production of heat pump water heaters. Here, you can find the heat pump water heaters you need.