











When the indoor swimming pool is used in winter, it is necessary to heat the pool water to make the water temperature reach 26-28 degrees, which requires a lot of thermal energy. Boilers, gas, and electricity are gradually eliminated due to their low thermal efficiency and environmental protection. More and more people will Option to use Swimming Pool Heat Pump. So in addition to environmental protection, what are the benefits of Swimming Pool Heat Pump?
Compared with traditional boilers, what are the advantages of Swimming Pool Heat Pump?
What advancements have the Swimming Pool Heat Pump made?
Why is the demand for Swimming Pool Heat Pump increasing?
Compared with traditional boilers, Swimming Pool Heat Pump does not use any fuel such as coal, oil, gas, etc., and does not produce open flames and exhaust emissions. Therefore, the use of air source heat pumps not only protects the atmospheric environment, but also eliminates fire, explosion, poisoning, etc. Accident happens. Compared with ordinary electric water heaters, it consumes less power, avoids leakage accidents, saves energy and is environmentally friendly. Compared with solar water heaters, air energy heat pumps are not affected by weather, geography, climate and other factors when working Sunny can be used normally.
smart system
① The unit control system adopts intelligent control. When customers use it, they only need to set the air temperature, humidity, and pool water temperature, and then the equipment will enter the fully automatic operation state, and there is no need for special personnel to take care of it.
② Customers can learn air temperature, humidity and other data through the touch-type full-color screen. Real-time value of pool water temperature and operating status of equipment.
③ Customers can also choose a communication interface according to their needs to implement remote control, monitoring and connection with the system.
ventilation system
Customers can choose the intelligent ventilation system of Swimming Pool Heat Pump. After choosing this system, the unit will control the amount of fresh air entering the room according to the concentration of carbon dioxide in the room, which can greatly save the energy consumption during operation.
Not only that, the advancement and development of sports equipment and facilities and equipment technology have also provided a foundation for more people to actively participate in fitness. Take swimming, the most popular sport, as an example. In the past, people swimming in open-air pools or public waters were easily limited by the temperature environment. If they accidentally caught a cold, it would be bad for their health, and microbial bacteria would grow in public waters. , the health situation is not optimistic. In recent years, with the advancement of Swimming Pool Heat Pump related supporting technical facilities, many swimming pools and other fitness places are equipped with heated swimming pools, and even schools, communities, villas, etc. are equipped with heated swimming pools, so that people can not only enjoy the hot summer. The fun of refreshing swimming can also have a comfortable swimming experience in the cold winter.
If you would like to receive more information about the Swimming Pool Heat Pump, please connect Guangdong JNOD New Energy Technology Co., LTD., and they will be happy to answer your question!
A swimming pool heat pump works to keep a constant pool temperature and extend the swimming season. Over the past years, it has stood out from other similar products such as boilers and the electric water heater and gained a growing market share. According to Arizton’s report, the pool heat pump market is expected to grow at a CAGR of over 5% during 2019−2025. Why does the pool heat pump become increasingly popular?
1. The rising economy and preference for swimming
Swimming has a long history and has been very favorable in the western world like North America, Europe, and Australia. It is assumed that the heat pump segment will increase stably in the foreign market owing to the consumption habit formed decades ago. Over the past few years, the thriving economy has made people out of western world more favorable for this sport. The Asia Pacific (APAC) region is expected to grow at a CAGR of around 6% in terms of revenues with a rise in swimming pool construction, high disposable income, and growth in awareness. As people enjoy a higher living standard and the group of villas-resident booms, the heated pool which can protect the privacy and bring better life quality, becomes a must for them.
2. A wave of home workouts during the pandemic, an engine for the private pool economy
During the Covid-19 pandemic, consumers have to stay at home and cannot go to the beach or public swimming pools, so private pools and hot tubs have met a wave of demand. And heat pumps also benefit from the fad. By its core competitiveness and the prosperous market, the heat pump one day will take the lead in the pool industry.
3.Energy efficiency and Cost-effectiveness
Known as one of the most energy-efficient pool heating options available, the heat pump is an “energy sipper” in comparison to other options. While electric heaters will use resistors and gas heaters burn fuel, heat pumps generate heat from ambient air, meaning it harvest heat from the air around it. The tiny amount of energy a heat pump uses to compress and convert is nothing compared to the amount of energy other heating options use.It’s greatly save energy and cut down your electricity bill.
4. Eco-Friendly
When you use a gas heater you are relying on combustion of the fuel. They continually burn gas in order to produce heat. This process comes with environmental consequences by emitting CO2 that destroys our ozone layer. A heat pump, however, does not burn anything and pull minimal electricity to harvest ambient air, and produces zero CO2 emissions.
5. Durability
Like any investment, you want your pool and all of its moving parts to last for years to come. Gas and electric heaters will only allow for 5-10 years max of usage and any repairs you might need on them will break the bank. A heat pump is built with longevity in mind and at a minimum will last 10-20 years, and with proper maintenance can last even longer.
It's no doubt an ideal choice for the green lifestyle, right?
Please feel free to contact our JNOD sales team when you need a swimming pool heat pump.OEM and ODM project are acceptable.
Email: info@jnodboiler.com Phone: +86-757-23617848
With the soaring price of gas and the emphasis on environmental protection in many countries around the world, heat pumps are becoming more and more important and popular among consumers and manufacturers. In the last 2 years, many various kinds of heat pumps have appeared on the market. In this article, we will teach you how to choose a good hybrid hot water heat pump, also called all in one heat pump water heater.
For a hot water heat pump, the water tank is very important, both the outcase and the interior are very important.
* Internal
At this point, we would recommend our customers to choose a hot water heat pump with an enameled water tank for the following reasons.
A. Good thermal insulation: Take JNOD's all in one heat pump with enameled tank as an example. After testing, when the water in the tank is boiled to the set temperature and then power off, the water in the tank will only have a temperature drop of 5-8 degrees Celsius after 24 hours. Such a hybrid heat pump is your wise choice.
B. Strong corrosion resistance: In areas with bad water quality, there are more impurities in the water. If you use the general iron water tank, the welding joints inside are prone to chemical reaction with impurities, which leads to the problem of water leakage.
* Outcase
Here we recommend that consumers choose galvanized steel plate as the shell material. There are businesses in the market will choose color plate. The service life of the color plate is very short, only 1-2 years. A long time inside the box exposed will also lead to water leakage problems in the tank.
Expect these suggestions will let you choose a better heat pump! Feel free to contact JNOD with any questions! Link:https://www.jnodheatpump.com
In the Heating and Cooling Heat Pump structure, the refrigerant directly exchanges heat with the air to be treated, without secondary heat exchange in the middle, which reduces the intermediate heat exchange links, which can effectively reduce the energy consumption of the system and improve the heat exchange efficiency.
What is the technological advancement of Heating and Cooling Heat Pump compared to traditional air conditioners?
Where can Heating and Cooling Heat Pump be used?
Why does Heating and Cooling Heat Pump become the choice of more and more consumers?
The refrigeration principle of the traditional air conditioner is to use the change of the physical state of the refrigerant. The change from the gaseous state to the liquid state will emit heat, and the change from the liquid state to the gaseous state will absorb heat. The "reverse Carnot" cycle used for Heating and Cooling Heat Pump is opposite to the refrigeration principle of traditional air conditioners. Using a "four-way electromagnetic reversing valve", a refrigeration cycle or a heating cycle can be realized, so that the car can get cold or hot air. . In the cycle of air-conditioning refrigerant, a large amount of heat will be released during the process of liquefying high-temperature and high-pressure gas into high-pressure liquid in the condenser, which is the principle of heat pump heat release. In winter, the reversing valve can be used to change the flow direction of the air-conditioning refrigerant. At this time, the evaporator acts as a condenser to release heat in the reverse cycle, forming a "heat source". At this time, only a small amount of electricity is consumed, and a large amount of heat from the outside can be transported and "pumped" into the pure electric vehicle to become a heat pump. However, the heating effect of heat pumps in low temperature environments needs to be improved.
The heating principle of Heating and Cooling Heat Pump is completely different from that of traditional solar water heaters. Air source heat pumps use air, water, solar energy, etc. as low-temperature heat sources. The hot water is directly sent to the user through the circulation system as hot water supply or small area heating using fan coil units. Heating and Cooling Heat Pump is the best solution for large, medium and small hot water centralized supply systems in school dormitories, hotels, bathing centers and other places.
Heating and Cooling Heat Pump is one of the most advanced energy utilization products in the world today. With the rapid development of the economy and the improvement of people's living standards, hot water for domestic use has become a necessity for people's lives. However, traditional water heaters (electric water heaters, fuel-fired water heaters, and gas water heaters) have disadvantages such as high energy consumption, high cost, and serious pollution; The operation of energy-saving and environmentally friendly solar water heaters is restricted by meteorological conditions.
After reading these words, do you have a interest to order an Heating and Cooling Heat Pump ? If necessary, you can contact Guangdong JNOD New Energy Technology Co., LTD., which is an advance Heating and Cooling Heat Pump Manufacturer.
The heat pump water heater absorbs air energy through the compressor, releases heat through the refrigerant and then heats the hot water. In general, it is a purely electric or boiler fuel, and the air source is supposed to transfer the energy of the air to the water through a certain amount of electrical energy. It is cost effective and has low operating cost. That's the most important thing. heat pump water heaters are safer, more energy-saving, more environmentally friendly, safer and fashionable than ordinary water heaters.
What is the basic working principle of a heat pump water heater?
What are the advantages of heat pump water heater and solar water heater?
Heating and cooling heat pump can be connected to Wi-Fi?
Heat pump water heater mainly consists of compressor, heat exchanger, axial fan, water tank for heat preservation, water pump, liquid storage, filter, electronic expansion valve and electronic automatic control. After switching on the power supply, the axial fan starts running, the outside air flows through the evaporator for heat exchange, and the reduced temperature air is expelled from the system by the fan. A kind of low pressure working medium gas is compressed into high temperature and high pressure gas and fed to the capacitor. The water forcibly circulated by the water pump also passes through the condenser and is heated by the working medium and fed to the consumer for use. The working medium is cooled to a liquid and the liquid expands. After the valve is throttled and cooled, it flows back into the evaporator. This cycle works repeatedly, and the heat energy in the air is continuously "pumped" into the water, so that the water temperature in the water tank for heat preservation gradually rises and finally reaches about 55°C, which is just suitable for people to take a bath.
Both work with air and solar energy, two of nature's renewable energy sources. What's the difference between the two?
In all seasons, even in winter, the effect of solar water heaters is very clear with sufficient sunlight, as well as on long rainy, snow and cloudy days. Solar water heaters cannot reflect the heating effect. The heat pump water heater is not affected by weather and season. It can supply hot water to users at any time. To be clear: The air flow heater can have hot water where there is air!
Wifi Monoblock High performance heat pump for heating and cooling, we offer not only advanced energy efficient heat pumps with advanced inverter technology, but also a total solution for heating, cooling and hot water supply in private homes. It has the WiFi remote. The heating and cooling heat pump can be controlled via Wi-Fi, allowing users to operate their heat pumps anytime, anywhere.
Guangdong JNOD New Energy Technology Co., LTD. can manufacture standard products under customers' brand, modify the products to meet customers' personalized requirements, and cooperate with customers to design and manufacture completely new products.
The working principle of the Heating and Cooling Heat Pump is a mechanical device that forces heat to flow from a low temperature object to a high temperature object in a reverse cycle. The applied low-grade thermal energy is utilized to achieve the purpose of energy saving.
How does the Heating and Cooling Heat Pump perform cooling and heating respectively?
What is the principle of Heating and Cooling Heat Pump?
Why is Heating and Cooling Heat Pump so practical?
When the air conditioner cools down in summer, the Heating and Cooling Heat Pump operates according to the cooling condition, and the high-pressure steam discharged from the compressor enters the condenser through the reversing valve (also known as the four-way valve); when heating in winter, the reversing valve Turn to the working position of the heat pump, so the high-pressure refrigerant vapor discharged from the compressor flows into the indoor evaporator (used as a condenser) after passing through the reversing valve, and the latent heat released when the refrigerant vapor condenses heats the indoor air to achieve indoor heating purposes. The condensed liquid refrigerant flows in the reverse direction through the throttling device into the condenser (used as an evaporator), absorbs external heat and evaporates, and the evaporated steam is sucked by the compressor after passing through the reversing valve to complete the heating cycle. In this way, the Heating and Cooling Heat Pump "pumps" the heat from the outside air (or circulating water) into the room with a higher temperature, so it is called a "heat pump"
When the air conditioner cools down in summer, it operates according to the refrigeration condition. The high-pressure steam discharged from the compressor by the Heating and Cooling Heat Pump enters the condenser through the reversing valve (also known as the four-way valve), and the refrigerant vapor is condensed into liquid. The flow device enters the evaporator, absorbs heat in the evaporator, cools the indoor air, and the evaporated refrigerant vapor is sucked by the compressor after passing through the reversing valve, and this cycle is repeated to realize the refrigeration cycle.
Heating and Cooling Heat Pump can operate normally between -27℃-48℃, and some low-temperature air-energy heat pumps are also capable of -35℃ ambient temperature, and still maintain normal operation. In our environment, a It can be used all-weather all year round, and will not be affected too much by rainy, windy and snowy weather, nor will it be affected by low temperature at night. However, solar heating equipment is greatly affected by environmental factors. In the case of insufficient light, it is difficult to achieve the effect of indoor heating, especially in areas with low ambient temperature in winter.
Guangdong JNOD New Energy Technology Co., LTD. provided marketing consultancy services and business solutions for customers from over 40 countries. tailor-make solution of hot water supply base on customer's market demand.
March 4th Alibaba Show For Electric Boiler And Heat Pump
Hello everyone, After a pleasant Chinese New Year holiday, we are very happy to meet you again in Alibaba's live broadcast room at 20:00 on March 4th .This time we will show you our latest electric boiler and heat pump products.
Highly welcome everyone to join and interact with us. You may get the latest market info sharing from it. Looking forward to cooperate with you.
A big discount and free sample will be offered during the show. We are waiting you.
Here's the link to watch our show:
The air source heat pump type works by using a small amount of electricity to drive the compressor to run and put the whole heat pump system into operation.
Heat is continuously absorbed from the air through the evaporator.
Finally the heat absorbed and the heat generated by the electricity consumed is transferred to the water through the condenser.
This unit is determined by measuring the energy input (in this case, electricity) and the energy output (heat).
A heat pump with a CoP of 3 can produce 3 kW of heat from every 1 kW of electricity.
Modern heat pump systems can transfer three to four times more heat energy in the form of heat than they consume in electrical energy to do this job.
Other electric heating products such as the boiler, which has a COP = 1, mean that as much electricity as you want to produce heat is consumed.
So choose a product with a COP greater than 1 (JNOD's heat pump) and you'll save on your energy bills!
Furthermore, JNOD's heating and cooling heat pump has Inverter EVI technology, which will allow the heat pump to adjust its operating power according to the ambient temperature, which will be even better.
There are many different factors will influence on your heat pump's electricity consumption, for example lifestyle, size of heat pump, heating space size,etc.
Don't hesitate to contact JNOD for further advice and discussion on heat pump.