A swimming pool heat pump works to keep a constant pool temperature and extend the swimming season. According to Arizton’s report, the pool heat pump market is expected to grow at a CAGR of over 5% during 2019−2025.
JNOD has our swimming pool heat pump to meet the market request.
For the swimming pool heat pump,we have the:
Residential on/off swimming pool heat pump,we can make the heating capacity from 3KW to 25kw.
Residential inverter swimming pool heat pump,we can make the heating capacity from 5kw to 28kw.
We can have the R32 and R410A model,we can make both plastic and metal out case.
It’s with 4 ways valve,provide both heating and cooling mode to create more possibility for pool enjoyment.The high performance, energy-efficient pool heat pump quietly and economically allows you to swim comfortably throughout the year!
Some customers may ask what’s the different between Residential on/off and inverter swimming pool heat pump.
It is very similar to the concept of air conditioning inverter technology.
On/Off is defined as “all or nothing “,the input power or the heating capacity keeps the same.
For the inverter system ,Unlike ON/OFF heat pump with single-speed compressor which by switching on and off periodically to adjust the performance of the heating & cooling, full inverter heat pump uses a variable speed compressor which can automatically adjust the output needed at the lowest consumption of power and maintain the best temperature at different climatic conditions. When the heating demand is high, the inverter compressor and the fan motor will start running at a high speed, inversely, they will run at a low speed.
The advantages included:
1.Achieve an extremely high COP.
2.Shorten heating time.
3.Greatly save energy and cut down electricity bill.
4.Contribute to a quiet neighbor environment.
Some customer told me,their swimming pool is not very big.
Here come a mini swimming pool heat pump will be suitable for you.
We have both 3KW and 5KW heating capacity model.
The mini heat pump is designed for above-ground pools.It’s light and easy to install,can be portable every where.Equipped with a plug & play power connection.
Besides the Residential swimming pool heat pump model,we also have the commercial swimming pool heat pump with full inverter technology meets your comfort needs coupled with energy-efficient operation, which is applied in commercial settings, including water parks, hotels, gyms, and so on.
OEM and ODM project are acceptable.Just contact JNOD sales team to get more information.
With the soaring price of gas and the emphasis on environmental protection in many countries around the world, heat pumps are becoming more and more important and popular among consumers and manufacturers. In the last 2 years, many various kinds of heat pumps have appeared on the market. In this article, we will teach you how to choose a good hybrid hot water heat pump, also called all in one heat pump water heater.
For a hot water heat pump, the water tank is very important, both the outcase and the interior are very important.
At this point, we would recommend our customers to choose a hot water heat pump with an enameled water tank for the following reasons.
A. Good thermal insulation: Take JNOD's all in one heat pump with enameled tank as an example. After testing, when the water in the tank is boiled to the set temperature and then power off, the water in the tank will only have a temperature drop of 5-8 degrees Celsius after 24 hours. Such a hybrid heat pump is your wise choice.
B. Strong corrosion resistance: In areas with bad water quality, there are more impurities in the water. If you use the general iron water tank, the welding joints inside are prone to chemical reaction with impurities, which leads to the problem of water leakage.
Here we recommend that consumers choose galvanized steel plate as the shell material. There are businesses in the market will choose color plate. The service life of the color plate is very short, only 1-2 years. A long time inside the box exposed will also lead to water leakage problems in the tank.
Expect these suggestions will let you choose a better heat pump! Feel free to contact JNOD with any questions! Link:https://www.jnodheatpump.com
The Heating and Cooling Heat Pump is driven by an electric motor, uses the heat in the air as a low-temperature heat source, exchanges heat through the air conditioner condenser or evaporator, and then passes through the circulation system to extract or release heat energy, and use the unit circulation system to transfer the energy to the building. It can meet the needs of users for domestic hot water, floor heating or air conditioning.
What is the cycle between the Heating and Cooling Heat Pump and the natural environment?
What is the principle of Heating and Cooling Heat Pump?
Does the Heating and Cooling Heat Pump make noise?
The compressor outlet of the Heating and Cooling Heat Pump is high-temperature and high-pressure gas, which is transformed into a high-pressure and low-temperature vapor-liquid mixture through the heat exchange of the condenser. The low-temperature gas enters the evaporator to evaporate and absorb heat, and absorb the low-grade heat energy from the outside world (which can be rivers, lakes, groundwater, underground soil layers, air, etc., which we call water source, ground source, and air source heat pump), and finally the evaporator comes out. The low pressure gas enters the compressor to complete the cycle.
Heating and Cooling Heat Pump is an evolved product of air conditioners. An electromagnetic four-way valve (also known as a reversing valve) is installed in the refrigeration system. Through the switching direction of the four-way valve, the flow direction of the refrigerant is changed, and the air conditioner can hot. The high-temperature and high-pressure vapor-like refrigerant discharged from the compressor flows to the condenser in the heat preservation water tank, transfers heat to the tap water passing through the water tank, and then throttles and reduces the pressure through the expansion valve, and evaporates and absorbs heat in the evaporator of the main outdoor heat pump group. Use the working fluid to absorb the heat in the outdoor air. The Heating and Cooling Heat Pump absorbs the heat in the outdoor air and transfers it to the tap water in the insulated water tank. It is more energy-saving, fast and safe than simply heating with an electric heater, and the outdoor thermal energy potential is infinite.
Noise problem, almost all of today's Heating and Cooling Heat Pumps use full frequency conversion technology, indoor unit frequency conversion, heat pump host frequency conversion, fan frequency conversion, etc. The noise value of the heat pump host is below 45 decibels, and the indoor noise is still below 20 decibels. Neither users nor neighbors will be affected.
JNOD has a complete heat pump industry chain, and its products involve Swimming Pool Heat Pump, House Heating & Cooling Heat Pump, Domestic Hot Water Heat Pump, Heat Pump Dehumidifier, Commercial & Industrial High Temperature Water Heating Solution, Industrial and Agricultural Heat Pump Dryer, etc. The ultra-low temperature EVI heat pump has been widely used, too.
heating and cooling heat pump integrates air conditioning and heating systems, is comfortable and energy-saving, and will surely lead the market trend of comfortable home life in the future.
How exactly does the heating and cooling heat pump work?
What is the basic principle of heating and cooling heat pump?
Will the floor height affect the installation of the heating and cooling heat pump?
The common heating and cooling heat pumps on the market are almost all of combined cooling and heating, which solves the problems of cooling in summer and heating in winter through a set of equipment. In some specific areas (the temperature is relatively high in winter), the air energy heat pump can also be connected to the domestic hot water tank to provide 24-hour uninterrupted hot water for the family, so the air energy heat pump can be used for cooling and heating, as well as cooling and heating. And with domestic hot water, but in order not to affect the heating effect, the domestic hot water is generally not combined.
Basic principle of heating and cooling heat pump: it is mainly composed of compressor, heat exchanger, axial fan, thermal insulation water tank, water pump, liquid storage tank, filter, electronic expansion valve and electronic automatic controller. After the power is turned on, the axial flow fan starts to operate. The outdoor air is heat exchanged through the evaporator. The air with reduced temperature is discharged from the system by the fan. At the same time, the working medium inside the evaporator is sucked into the compressor. The compressor compresses the low-pressure working medium gas into high-temperature and high-pressure gas and sends it to the condenser. The water forcibly circulated by the water pump also passes through the condenser and is heated by the working medium and sent to the user for use, The working medium is cooled into liquid, which flows into the evaporator again after throttling and cooling by the expansion valve. In this way, the heat energy in the air is continuously "pumped" into the water, so that the water temperature in the insulation water tank gradually rises to about 55 ℃, which is just suitable for people to take a bath. This is the basic working principle of heating and cooling heat pump.
The floor height problem, many people think that the floor height of the elevator apartment is relatively low, and the installation of heating and cooling heat pump will cause the room to become depressed, but in fact, the installation of heating and cooling heat pump will not have much impact on the floor height. , The concealment of central air-conditioning can reduce the sense of oppression of the floor height through the reasonable planning of the ceiling, and the floor heating can also be laid by dry floor heating. The floor height is only increased by 3-4 cm, and the user cannot distinguish it with the naked eye.
Guangdong JNOD New Energy Technology Co., LTD. is the leading manufacturer sofa manufacturer specializing in heating and cooling heat pump. If you want to get more information, just go and connect them.
How time flies, the first quarter of 2022 will soon pass. Do you have any new plans for your business? JNOD has developed some new creative products including electric boiler, heat pump and water heaters. In order to thank new and old customers, we will hold an Alibaba online live stream show on March 11, from 8:00-10:00 pm Beijing time. Big discount and promotions are available during the show time. Welcome to join us.
Here's the link to watch our show：
In fact, the working principle of the Heat Pump Hot Water Heater does not differ significantly from the working principle of our air conditioning system. However, our household air conditioners use the cold end (evaporator) of the cooling circuit system; In contrast, heat pumps use the hot end (condenser) of the circulatory system.
What is the spring of air simultaneous heating and cooling heat pump for homes?
How does the Heat Pump Hot Water Heater provide hot water?
What is the current market situation for Heat Pump Hot Water Heaters?
● Brushless DC inverter fan motor
The speed of the fan motor was increased by 45% and the silence of 35 dB was reached.
● Working at extremely low temperature
The inverter compressor can run stably at extremely low temperatures.
● Adaptive thermostat technology of ±1℃
The user feels more comfortable with small temperature fluctuations.
The basic principle of heat pump water heater: It mainly consists of compressor, heat exchanger, axial fan, heat storage water tank, water pump, liquid storage, filter, electronic expansion valve and electronic automatic control. After switching on the power supply, the axial fan starts running, the outside air flows through the evaporator for heat exchange, and the reduced temperature air is expelled from the system by the fan. A kind of low pressure working medium gas is compressed into high temperature and high pressure gas and fed to the capacitor. The water forcibly circulated by the water pump also passes through the condenser and is heated by the working medium and fed to the consumer for use. The working medium is cooled to a liquid and the liquid expands. After the valve is throttled and cooled, it flows back into the evaporator. This cycle works repeatedly, and the heat energy in the air is continuously "pumped" into the water, so that the water temperature in the water tank for heat preservation gradually rises and finally reaches about 55°C, which is just suitable for people to take a bath.
Heat pump water heaters are a new thing on the market, and consumer awareness of this is still very low. There are many people who think that it is impossible to get three parts heat with one part heat, and the same applies to other products related to the application of heat recovery technology, although the popularity of heat pump air conditioners was very high.
People's understanding is limited only to the fact that air conditioning is a large electricity consumer, but they do not know that it is more energy-saving than the coal-fired ball furnace. As some larger shopping malls have not yet sold air-powered water heaters, consumer awareness of air-powered water heaters is still very low.
In order to meet these growing requirements, Guangdong JNOD New Energy Technology Co., LTD. has various heat pump water heaters, which allow to increase the products and make them more effective, reliable and consistent.
As heat pumps are more and more popular in the market, people want to know if it's worthy to use it.
Of course Yes! Heat pump water heaters are worth the cost.
Heat pumps are significantly more energy efficient than normal electric or gas hot water heaters because instead of using energy to generate new heat, they collect existing ambient warmth and transfer it to the water. This efficiency can save you hundreds of dollars on energy bills each year.
Tax Incentives and Rebates
With tax incentives and state-sponsored sales rebates, energy efficient heat pump water heaters can actually be a more affordable choice than most homeowners would expect. Though the upfront cost is high, most homeowners pay back heat pump water heaters within the first or second year alone. And heat pump water heaters are long-lasting – a good, well-maintained heater can last between ten to fifteen years.
Because heat pumps are more energy efficient than conventional hot water heaters, they do not use as much electricity and/or natural gas, which reduces greenhouse gas emissions. In fact, it estimates that if all residential water heaters were replaced with heat pump water heaters, there would be up to 140 billion pounds of greenhouse gas emissions are saved annually.
We Jnod now provide various air to water heat pump, any question or need welcome to inquire us!
The heating and cooling heat pump is a device that transfers heat energy from a low-level heat source to a high-level heat source, and is also a new energy technology that has attracted a lot of attention worldwide. It differs from the well-known mechanical equipment, which can increase the potential energy"Pumps"; A heat pump usually first extracts inferior heat energy from natural air, water or earth, then performs work by electricity, and then provides people with available energy that can be used. of high quality thermal energy.
What is the working medium of the heating and cooling heat pump?
What role does the heating and cooling heat pump play?
What do you know about heating and cooling heat pumps?
The working medium of the heating and cooling heat pump used to be Freon, but since Freon adversely affects the Earth's atmospheric ozone to protect the Earth's ecological environment, in addition to improving the cooling coefficient of the heat pump and effective use, science is also committed to new technologies in various countries. With the development of quality, the working fluid was used as a replacement for Freon. However, the work equipment of most Chinese manufacturers today is still R22, and the era of using environmentally friendly work equipment R417A and 134A has not yet arrived. Some countries, such as Japan, have taken the lead in using CO2 as a working medium to avoid damaging the ozone layer. (Therefore, the copper pipes must be firmly connected during installation to prevent R22 from leaking.) In addition, the above R22, R417A, 134A and CO2 do not harm the human body. Even if there is a leak, all the equipment is still safe.
The low temperature heat sources normally used in heat pumps for heating and cooling are the media around us. Air, river water, seawater, municipal wastewater, surface water, groundwater, treated water, fire pits or working fluids, which are discharged from industrial production plants these working fluids often have similar temperatures to the surrounding medium. The operating principle of the heating and cooling heat pump is the same as that of the compression chiller. In order to fully exploit its efficiency, the small air conditioner is cooled with the same equipment in summer or heated in winter. When heating in winter, the evaporator and condenser in the air conditioning system are exchanged via a switching valve.
Heat pumps for heating and cooling are an intelligent, efficient and versatile solution for year-round heating, cooling and hot water supply solutions. In addition to their flexibility and wide application, they are energy efficient and environmentally friendly, with advanced EVI technology and green refrigerant R32/R410A. So you can enjoy a comfortable home and save energy at the same time.
JNOD insisted on developing with technological innovation, it had several nationally famous technicians and had invented several product patents. The company has strictly implemented the international ISO quality management system, and the products are of reliable guaranteed quality.