Universal Electric Heating And Cooling Heat Pump- Suppliers Manufacturers Factory From China

Hello everyone, We sincerely invite you to watch our live stream shows on Alibaba in 15th, April.

We will show you our hottest and newest electric boiler and heat pump during the live show.

Some latest market information about the boiler and heat pump products would be shared either.

If you don't want to miss our new arrivals, cost-effective and hot selling products, or have anything you want to communicate with us, welcome to meet us:

Link: https://www.alibaba.com/live/get-the-hottest-trending-electric-boiler_94691c7f-cc7a-4215-a000-2810192b9712.html?referrer=SellerCopy

Here's the link to watch our show:

DATE: April 15^th ,2022

Time: 21:00-23:00PM

The operating principle of heat pump water heaters is very similar to that of air conditioning systems. It consumes a small amount of electrical energy to get the compressor running. The working fluid is compressed by the compressor into a liquid state with high temperature and high pressure, and then enters the condenser to release heat to heat the water. By circulating and heating in this way, the water can be heated from 50°C to 65°C.

What are the main components of heat pump water heaters?

How does the heat pump water heater work?

Why should the heat pump water heater be green?

What are the main components of heat pump water heaters?

Four main components of refrigeration technology: evaporator, compressor, condenser and throttling device.

Three stable parts: liquid storage tank (compressor), expansion valve (capillary tube), dry filter (filtering water and impurities)

A large piece of defrosting: four-way valve

Break through traditional energy conversion theory to achieve high energy efficiency:

When operating the heat pump, the working medium in the evaporator can absorb the energy QA stored in the ambient medium;

And starting the system must consume energy, that is, the power consumption of the QB compressor;

At the same time, the heat emitted from the working medium to the high temperature medium in the condenser is QC;

After the compressor input work starts the system, the mechanical kinetic energy becomes thermal energy. The energy output of the heat pump is thus the sum of the work done by the compressor QB and the heat absorbed by the heat pump from the environment QA; Enter a QB to get QB+QA and break the traditional bottleneck that conversion between different energies cannot achieve full efficiency; Heat pump technology is more energy efficient.

How does the heat pump water heater work?

heat pump water heaters work according to the "reverse carnotic" principle, specifically the "outdoor unit" as a heat exchanger absorbs heat from the outside air, heats the low boiling working medium (refrigerant) and evaporates it, and the refrigerant vapor The water is compressed and heated by the compressor and enters the water tank, and the water in which the heat is released is condensed and liquefied and then throttled and pressurized to return to the outer heat exchanger to enter the next circuit. The heat pump water heater simply absorbs the heat in the air to heat the water, and the air that has absorbed the heat can also be used in the kitchen to solve the problem of stuffy heat.

Why should the heat pump water heater be green?

The heat pump water heater has energy saving functions.

The biggest advantage of the heat pump water heater is undoubtedly the energy saving. The low-temperature thermal energy in the air is converted into high-temperature thermal energy by the compressor. Based on the same amount of hot water generation, the energy saving is maximized compared to the water heater with electric heating, and the cost of use is only 1/4 of the cost of electric water heater. Compared to gas water heaters, it consumes no gas fuel and the cost of use is only 1/3 of the cost of gas water heaters. heat pump water heaters take air as the main body and save energy, which not only saves people's usage cost, but also corresponds to the main body of energy saving in the world. This is one of the biggest highlights of air energy water heaters.

Guangdong JNOD New Energy Technology Co., LTD. Focus on research and development of heat pumps and electric boilers, manufacturing and providing comprehensive energy saving solutions.

The basic principle and characteristics of Swimming Pool Heat Pump. It is based on the basic principle of the reversed Carnot cycle, using a small amount of electricity to drive a device that transfers heat from a low-temperature heat source to a high-temperature heat source.

What are the advantages of Swimming Pool Heat Pump?

What is the current development trend for Swimming Pool Heat Pump?

What is the working physics of the Swimming Pool Heat Pump?

What are the advantages of Swimming Pool Heat Pump?

1. The water temperature of the Swimming Pool Heat Pump can be set freely, and the scope of application is wider, and it can be flexibly applied to various engineering needs.

2. Swimming Pool Heat Pump uses Copeland scroll compressor, which has high efficiency, low vibration, convenient maintenance and low operational risk.

3. Swimming Pool Heat Pump has a wide operating temperature range and is more reliable in application.

4. Swimming Pool Heat Pump adopts the parallel design of compressors, which makes the operation more stable and the failure rate is lower. Even if one of them fails, the unit can still operate, reducing operational risks.

5. Swimming Pool Heat Pump meets all-around application, with cooling, heating and hot water functions.

What is the current development trend for Swimming Pool Heat Pump?

In the competition and iteration of many heating methods, Swimming Pool Heat Pump has become the mainstream choice of swimming pool business in recent years with the characteristics of clean energy and high energy efficiency. In the past, the Swimming Pool Heat Pump was limited by technology, and as the temperature dropped, its heat pump performance also declined. Facing the requirement of constant temperature swimming pools to operate in four seasons, energy saving and high efficiency, the industry rookie frequency conversion Swimming Pool Heat Pump subversively refreshes the annual energy efficiency performance of Swimming Pool Heat Pump, stunning the market.

What is the working physics of the Swimming Pool Heat Pump?

Swimming Pool Heat Pump is a high-quality product specially developed for indoor swimming pools. It integrates air conditioning, dehumidification, pool water heating, heat energy recovery, and fresh air treatment. It recovers and comprehensively utilizes energy in a large amount, and overcomes many problems such as high humidity and high chlorine environment. The change of different operation modes in spring, summer, autumn and winter achieves efficient and energy-saving operation.

Swimming Pool Heat Pump can fully control indoor relative humidity at 50~75%, air temperature at 27~30℃, water temperature at 26~40℃, and advanced intelligent ventilation control to maintain a high-quality indoor comfortable environment. Widely used in dry swimming pools, hot spring resorts, hotels, clubs, other fields, factories, schools and other fields that require dehumidification and constant temperature.

The working principle of Swimming Pool Heat Pump is to recycle the evaporative heat loss on the surface of the pool water, transfer it into the pool water and air, make up for the heat loss of the pool water and air, and realize the function of air conditioning and dehumidification at the same time.

Guangdong JNOD New Energy Technology Co., LTD. has various Swimming Pool Heat Pumps that can provide the best quality, and make people feel more comfortable, reliable, and consistent.

With the soaring price of gas and the emphasis on environmental protection in many countries around the world, heat pumps are becoming more and more important and popular among consumers and manufacturers. In the last 2 years, many various kinds of heat pumps have appeared on the market. In this article, we will teach you how to choose a good hybrid hot water heat pump, also called all in one heat pump water heater.

For a hot water heat pump, the water tank is very important, both the outcase and the interior are very important.

* Internal

At this point, we would recommend our customers to choose a hot water heat pump with an enameled water tank for the following reasons.

A. Good thermal insulation: Take JNOD's all in one heat pump with enameled tank as an example. After testing, when the water in the tank is boiled to the set temperature and then power off, the water in the tank will only have a temperature drop of 5-8 degrees Celsius after 24 hours. Such a hybrid heat pump is your wise choice.

B. Strong corrosion resistance: In areas with bad water quality, there are more impurities in the water. If you use the general iron water tank, the welding joints inside are prone to chemical reaction with impurities, which leads to the problem of water leakage.

* Outcase

Here we recommend that consumers choose galvanized steel plate as the shell material. There are businesses in the market will choose color plate. The service life of the color plate is very short, only 1-2 years. A long time inside the box exposed will also lead to water leakage problems in the tank.

Expect these suggestions will let you choose a better heat pump! Feel free to contact JNOD with any questions! Link:https://www.jnodheatpump.com

The iterative upgrade of technology has brought more possibilities and greater imagination to the swimming pool equipment industry. This is the case with the application of air energy technology. With the continuous advancement of the dual-carbon strategy, the emergence of Heating and Cooling Heat Pump not only refreshes people's experience, but also redefines the effect of energy saving and consumption reduction.

What changes can Heating and Cooling Heat Pump bring to consumers' lives?

Can the Heating and Cooling Heat Pump provide continuous heating?

What is the running cost of Heating and Cooling Heat Pump?

What changes can Heating and Cooling Heat Pump bring to consumers' lives?

Heating and Cooling Heat Pump is a kind of air-conditioning water heater equipment that uses air as a cold (heat) source to provide air conditioning, heating and domestic hot water to indoor spaces.

There are five operating modes for the Heating and Cooling Heat Pump. The cooling and cooling heating water modes can be operated in summer; the heating and heating heating water modes can be operated in winter; the hot water mode can be operated separately in excessive seasons, so as to provide cooling, dehumidification, heating and domestic hot water to the living environment throughout the year. When the unit operates in the cooling and heating water mode, it can achieve full heat recovery, the total two-way energy efficiency ratio is above 7.0, and the domestic hot water is completely free.

Can the Heating and Cooling Heat Pump provide continuous heating?

Continuity Analysis of Heating and Cooling Heat Pump

Heating and Cooling Heat Pump heating and traditional solar heating are usually equipped with a water tank to store heat for indoor heating. However, the air energy heat pump can absorb low temperature heat energy from the low temperature environment, and then convert it into high temperature heat energy through the compressor, so as to This can continuously supply heating and hot water to meet indoor heating needs. However, when solar heating is insufficient in sunlight, it is difficult to heat the heating circulating water in the water tank, especially at night and in bad weather, the indoor heating effect will inevitably be affected.

What is the running cost of Heating and Cooling Heat Pump?

When the outdoor light conditions are good, the operating cost of solar heating will be lower than that of Heating and Cooling Heat Pump, after all, the heat source mainly comes from free sunlight. However, at night and in rainy, windy and snowy weather, the thermal efficiency of the electric auxiliary heating used in solar heating equipment is much lower than that of Heating and Cooling Heat Pump heating equipment. Especially in winter, rainy, windy and snowy weather occupies most of the time. Therefore, if solar heating wants to get a good heating effect, it must pay more energy.

Guangdong JNOD New Energy Technology Co., LTD. has full experience in the field of energy products for more than 13 years. JNOD has kept growing rapidly during these years since it was established. In 2020, more than 60% of our heat pump products were exported to Europe, North America , Middle East, Australia, and other developed regions.

Heating and Cooling Heat Pump has the characteristics of comfort, energy saving, stability, environmental protection, safety, long service life, wide application range and one machine dual use in actual use, which makes Heating and Cooling Heat Pump more popular,favored by users.

What are the advantages of Heating and Cooling Heat Pump?

Why are more and more consumers choosing Heating and Cooling Heat Pump?

What installation conditions are the Heating and Cooling Heat Pump suitable for?

What are the advantages of Heating and Cooling Heat Pump?

1. Safe operation and environmental protection

Heating and Cooling Heat Pump adopts the form of heat pump heating, water and electricity are completely separated, no coal or natural gas is needed, and it will not pollute the environment, and there is no need to worry about the leakage of refrigerant to pollute the environment.

2. Flexible and unlimited use

Heating and Cooling Heat Pump Compared with solar, gas, water ground source heat pumps, air source heat pumps are not limited by geology and gas supply, and are not affected by bad weather such as night, cloudy, rain and snow, so they can Realize safe operation 24 hours a day throughout the year.

3. Energy-saving technology, power saving and worry-free

Heating and Cooling Heat Pump is efficient and environmentally friendly. Compared with electric heating, it saves 75% of electricity bills per month, saving users considerable electricity bills.

Why are more and more consumers choosing Heating and Cooling Heat Pump?

Heating and Cooling Heat Pump can use floor heating as the heating end when heating. The comfort of floor heating is well known. It conforms to the traditional Chinese medicine theory of warm feet and cool top, giving people a feeling of warm feet and cool head. And the upper pass, the room is warm and cool, giving people a natural and comfortable feeling. Of course, radiators and fan coil units can also be selected at the end of indoor heating (when the water supply temperature is 35°C-45°C, the indoor floor heating can be used as the end; when the water supply temperature is 40°C-50°C, the indoor fan coil can be used as the end. The end; when the water temperature is above 55℃, the radiator can be used as the end in the room).

What installation conditions are the Heating and Cooling Heat Pump suitable for?

The main unit of the Heating and Cooling Heat Pump is similar to the outdoor unit of the central air conditioner, and can be installed in the outdoor unit of the central air conditioner, and the air energy heat pump has the functions of cooling and heating, as long as sufficient ventilation and ventilation environment is ensured, for other installations conditions are relatively low. However, when considering the installation factors of solar heating equipment, it is especially necessary to pay attention to the lighting conditions. It is difficult for ordinary elevator apartments to find suitable installation conditions.

For more information about Heating and Cooling Heat Pump, please contact Guangdong JNOD New Energy Technology Co., LTD., Ltd. has committed to providing the increasing of Heating and Cooling Heat Pump, and make them more effective, reliable, and consistent.

March 4^th Alibaba Show For Electric Boiler And Heat Pump

Hello everyone, After a pleasant Chinese New Year holiday, we are very happy to meet you again in Alibaba's live broadcast room at 20:00 on March 4th .This time we will show you our latest electric boiler and heat pump products.

Highly welcome everyone to join and interact with us. You may get the latest market info sharing from it. Looking forward to cooperate with you.

A big discount and free sample will be offered during the show. We are waiting you.

Here's the link to watch our show：

https://www.alibaba.com/live/jnod-new-energy-technology-central-heating_79c95335-de87-4ff0-82e5-c4dcb95bdf44.html?referrer=SellerCopy

Air heat pump water heater has low energy consumption (power consumption saves more than 2/3 compared to conventional electric water heaters), high thermal efficiency (heating speed is four times higher than conventional electric water heaters), Environmental protection and energy saving (reduces more than 2/3 compared to conventional electric water heaters) carbon dioxide emissions).

What are the differences between heat pump water heaters and air conditioners?

Why do heat pump water heaters improve the consumer experience?

What is the working process of the heat pump water heater?

What are the differences between heat pump water heaters and air conditioners?

The operating mode of the heat pump water heater is very different from that of the air conditioner, which determines the difference in the design concept between the heat pump compressor and the air conditioner compressor. Trouble-free, long-term stable operation of heat pump water heaters Compared to air conditioning systems, there is a big difference in the operating time. The operating time of heat pump water heater systems is much longer than that of air conditioning systems. The operating time of a heat pump water heater depends on the following factors: Air conditioning systems are often used in summer, but water heaters are mass-produced and run particularly long in winter. The time for heating a water tank in winter is several times as long as in summer, so it is necessary to confirm the operating mode of the heat pump water heater in winter.

Why do heat pump water heaters improve the consumer experience?

According to statistical calculations, 2/3 of the service life of the heat pump water heater is consumed in winter. Since the water outlet temperature of the heat pump is over 55°C, the temperature of the water tank decreases when using. The liquefaction temperature is the main factor affecting the service life of the compressor. Under the condition of simultaneous operation, the total load of the compressor in the heat pump water heater is much higher than that of the compressor in the air conditioning system. The main motivation for consumers to buy water heaters with heat pump is energy saving and comfort. Consumers will thus consume more water, which also extends the working time of the heat pump. If the heat pump water heater is used for heating and service water applications, it can run for a long time during the heating period. From the combination of the above factors, it is evident that the main motor of the heat pump water heater will develop in the direction of miniaturization, and the actual operating time will be greatly extended.

What is the working process of the heat pump water heater?

A water heater with compression heat pump mainly consists of evaporator, compressor, condenser and expansion valve. Thermal Circular Process Throttling → Re-evaporation, whereby heat from the environment is transferred to the water.

Guangdong JNOD New Power Technology Co., LTD. sales team has extensive experience in overseas markets. We provide sincere and professional services, including OEM/ODM/project services, technology support, market analysis, use of design and assembly of installation. We have provided marketing consulting services and business solutions to customers from over 40 countries.

2022-11-24 · The heat pump is able to transfer a much greater amount of heat energy from the surrounding air to the water, which makes it highly efficient. The amount of heat that is able to be transferred from the air to water depends on the ambient temperature. While the outside temperature is higher than the cold refrigerant, the heat pump will absorb ...

Hot Water Heat Pumps 9.5KW to 24.5KW Monoblock Top Discharge Air Source Heat Pump Hot Water Heater Inquire EVI 28KW 80℃ Hot Water High Temperature Air Source Heat Pump Heating Inquire 42KW-68KW Low Cost Hot Water High Temperature Air Source Heat Pump Max 80C Inquire 40KW -25℃ EVI Air Source Heat Pump for Cold Weather Hot Water

Home > Products > Heat Pump Water Heater. View More. 200L Enamel All in One Heat Pump Water Heater. Inquire Now. View More. New Design 1.7kw All in One Heat Pump Water Heater. Inquire Now. View More. Hot Sale Enamel All in One Heat Pump Hot Water Heater.

2022-10-21 · 400L Air Source Heat Pump Water Heater is split type heat pump water heater with 400L tank and 2 HP heat pump, which is suitable for 6-8 persons to use hot water. Air energy …

Greenstore ground source heat pumps (part 2 of 2) A ground source heat pump bore-hole installation Find a local installer Each heating system needs custom designing. Find and contact a Worcester Accredited Installer in your area to book a home visit and get a free quote. Find the right boiler for you

Guangdong New Energy Technology Development Co., Ltd. [Guangdong,China] Business Type:Manufacturer

Monobloc Heating And Cooling Heat Pump Contact Details Solareast Heat Pump Ltd. Contact Person: admin Tel: 8613727864674 Send your inquiry directly to us ( 0 / 3000) Other Products R32 10kw Air Source Monoblock Heating And Cooling Heat Pump Residential Use 220V Geothermal Air Source Heating And Cooling Heat Pump R32 Refrigerant

2022-11-23 · Energy Efficiency Grade: One Heat Temperature: 50-70°C Work Environment: Common Heat Pump Heat Source: Air-source Heating Type: Circulating Heat Application: Villa Family, Sauna and Swimming Pool, Hotels, Factory Hospital, Student Apartments, Beauty Salons