











The heat pump water heater is almost the same as the cooling principle. A good heat pump system design can utilize the cold and hot ends of the refrigeration system at the same time, that is, in hot summer, the indoor is refrigerating, while the outdoor condenser is heating hot water.
What is the purpose of the heat pump water heater?
What are the performance advantages of heat pump water heaters?
What should be paid attention to in the installation of heat pump water heater?
heat pump water heater integrates various functions such as hot water supply, heating, dehumidification, cooling, and air filtration:
No matter the weather, rain or snow all year round, the eat pump water heater automatically provides hot water 24 hours a day without interruption;
eat pump water heater High-efficiency dehumidification, the maximum dehumidification capacity is 6~8 kg in 24 hours a day, and the effect is obvious in rainy and rainy weather;
eat pump water heater filters indoor air, and the effect is more obvious when installed in the kitchen.
eat pump water heater With additional heating accessories, it can heat up the room by more than 5°C in winter, making learning, entertainment and sleeping more comfortable. No matter it is cloudy, sunny, day or night, as long as there is air, hot water can be produced. At room temperature, 180L of hot water can be produced per hour.
1. It is safe enough, water and electricity are separated, no danger, it is heated by the heat of air, and it is highly technological. Other water heaters have certain risks. heat pump water heaters are completely safe, protecting the lives of family members and providing comfortable hot water.
2. Economical enough, heat pump water heater is used in winter, about 1~1.5 kWh of electricity a day, enough for a family of 4~5 people, generally 4~5 people, at least 3~4 kWh of electricity a day.
3. Enough to enjoy, the heat pump water heater can have 24 hours of comfortable hot water, and it is a 24-hour constant temperature, which can be used immediately after opening, saving a lot of time for boiling water and avoiding accidents.
4. It is fashionable enough. The exterior of the heat pump water heater is very good-looking. At first glance, it makes people feel high-end and fashionable.
5. It is convenient enough, the heat pump water heater can be operated by iphone to control the temperature, or it can be controlled by the touch screen of the machine, which is convenient and fast.
6. Comfortable enough, the heat pump water heater has the function of air-conditioning in the kitchen, which solves the problem of hotness in the kitchen and enjoys the sense of accomplishment when cooking.
With drainage facilities:
When installing the heat pump water heater, condensed water will be discharged during use, so the installation location must have drainage facilities such as floor drains and gutters.
Instrument installation location:
The instrument, that is, the control panel, needs to be installed nearby to avoid rain; since most of the operation modes choose "economy mode", the control panel is rarely operated, and it is not necessary to install it in a very conspicuous position. Install.
Water pipe arrangement:
The inlet and outlet pipes of the heat pump water heater are preferably 25PPR pipes.
JNOD insisted on developing with technology innovation, it possessed of several national famous technicians and had invented multiply product patents. The company has been strictly implement the ISO international quality management system, and the products are of reliable guaranteed quality.
The operating principle of heat pump water heaters is very similar to that of air conditioning systems. It consumes a small amount of electrical energy to get the compressor running. The working fluid is compressed by the compressor into a liquid state with high temperature and high pressure, and then enters the condenser to release heat to heat the water. By circulating and heating in this way, the water can be heated from 50°C to 65°C.
What are the main components of heat pump water heaters?
How does the heat pump water heater work?
Why should the heat pump water heater be green?
Four main components of refrigeration technology: evaporator, compressor, condenser and throttling device.
Three stable parts: liquid storage tank (compressor), expansion valve (capillary tube), dry filter (filtering water and impurities)
A large piece of defrosting: four-way valve
Break through traditional energy conversion theory to achieve high energy efficiency:
When operating the heat pump, the working medium in the evaporator can absorb the energy QA stored in the ambient medium;
And starting the system must consume energy, that is, the power consumption of the QB compressor;
At the same time, the heat emitted from the working medium to the high temperature medium in the condenser is QC;
After the compressor input work starts the system, the mechanical kinetic energy becomes thermal energy. The energy output of the heat pump is thus the sum of the work done by the compressor QB and the heat absorbed by the heat pump from the environment QA; Enter a QB to get QB+QA and break the traditional bottleneck that conversion between different energies cannot achieve full efficiency; Heat pump technology is more energy efficient.
heat pump water heaters work according to the "reverse carnotic" principle, specifically the "outdoor unit" as a heat exchanger absorbs heat from the outside air, heats the low boiling working medium (refrigerant) and evaporates it, and the refrigerant vapor The water is compressed and heated by the compressor and enters the water tank, and the water in which the heat is released is condensed and liquefied and then throttled and pressurized to return to the outer heat exchanger to enter the next circuit. The heat pump water heater simply absorbs the heat in the air to heat the water, and the air that has absorbed the heat can also be used in the kitchen to solve the problem of stuffy heat.
The heat pump water heater has energy saving functions.
The biggest advantage of the heat pump water heater is undoubtedly the energy saving. The low-temperature thermal energy in the air is converted into high-temperature thermal energy by the compressor. Based on the same amount of hot water generation, the energy saving is maximized compared to the water heater with electric heating, and the cost of use is only 1/4 of the cost of electric water heater. Compared to gas water heaters, it consumes no gas fuel and the cost of use is only 1/3 of the cost of gas water heaters. heat pump water heaters take air as the main body and save energy, which not only saves people's usage cost, but also corresponds to the main body of energy saving in the world. This is one of the biggest highlights of air energy water heaters.
Guangdong JNOD New Energy Technology Co., LTD. Focus on research and development of heat pumps and electric boilers, manufacturing and providing comprehensive energy saving solutions.
During the working process of the heat pump water heater, it consumes 1-part electricity to get the compressor running, and at the same time, it can absorb about 4-part heat from the ambient air and transfer it to the water. Therefore, air energy water heaters can save almost 3/4 electricity compared to electric water heaters. That is, the electric water heater consumes 4 kWh electricity to produce hot water, and the air energy water heater requires only 1 kWh electricity.
What role does the refrigerant play in the unit composition of the heat pump water heater?
What is the physical principle of how a heat pump water heater works?
What is the significance of the appearance of heat pump water heaters?
The heat pump unit contains a special heat-absorbing refrigerant. In the liquefied state, the normal temperature is below minus 20°C. Therefore, there is a temperature difference between it and the outside temperature. The refrigerant absorbs the outside temperature and is stored in the evaporator. Generate pressure and evaporate and evaporate, and through the work of the heat exchanger (heat pump), when the refrigerant is transferred from the evaporated state to the liquefied state, the objectively existing heat is released to the storage water in the water tank.
The heat pump water heateruses the heat absorbing medium (refrigerant) in the device to collect heat energy from the air or the natural environment, heats the cold water quickly through the heat exchanger and at the same time releases the cold air, avoiding the lack that conventional solar products can not work in rainy weather and at night. As long as the outside temperature is above 1-15 degrees, it can work normally, so can be more efficient and energy-saving, at the same time does not occupy open space, and is easy to install and flexible to use.
With the rapid development of the economy and the improvement of people's living standards, water heating has become a necessity for people's lives. However, conventional electric water heaters have the disadvantages of large energy consumption, high cost and serious environmental pollution; while the operation of energy-saving and environmentally friendly solar water heaters is also restricted due to weather conditions. The heating principle of the air heat pump is different from that of the conventional solar water heater. The air heat pump uses air, water, solar energy, etc. as a low temperature heat source, and the air heat pump uses the electrical energy as energy to absorb heat from the low temperature side to heat the service water.
Guangdong JNOD New Energy Technology Co., LTD. can provide product certification requirements for local markets; provision of catalogues, technical manuals; exhibit together with customers at leading industrial fairs; Advertise in local market media through our press release resources.
More and more people choose heat pump water heatersbecause air energy is the most energy-efficient, that is, the lowest operating cost, compared to most water heaters that consume electricity and gas.
How does the heat pump water heater achieve the effect of saving energy?
What should we pay attention to when using heat pump water heater?
What are the operational advantages of heat pump water heaters?
When the heat pump water heater is working, the energy QA stored in the ambient medium is absorbed in the evaporator; it consumes a part of the energy itself, that is, the compressor consumes power QB; the heat release QC is carried out in the condenser through the working fluid circulation system, QC=QA+QB, it can be seen that the energy output by the heat pump is the work QB done by the compressor and the heat QA absorbed by the heat pump from the environment; therefore, the use of heat pump technology can save a lot of electric energy.
temperature, water consumption
Put the bath water in the heat pump water heater. The most suitable water temperature is 42°C. It can be slightly higher by 1-2°C for middle-aged and elderly people. The water for showering is about 40~50 liters per person. Bathtubs and Jacuzzis are determined by capacity.
How much hot water can be made
In terms of product performance and theory, the heat pump water heater can be cycled back and forth to continuously produce hot water. Under normal temperature, the hot water can be produced per hour as follows (45℃-55℃): It depends on the size of the unit.
The heat pump water heater absorbs the low-temperature heat in the air, vaporizes it through the fluorine medium, and then compresses it through the compressor to heat up and pressurize it. The air energy water heater has the characteristics of high efficiency and energy saving. The same amount of hot water produced is 4-6 times that of the electric water heater. Its annual average thermal efficiency ratio is 4 times that of the electric heating, and the energy efficiency is high.
The heat pump water heater overcomes the shortcomings of solar water heaters that rely on sunlight for heating and inconvenient installation. Since the work of the air energy water heater is to exchange heat through the medium, it does not need the electric heating element to be in direct contact with the water, which avoids the danger of electric water heater leakage, and also prevents the gas water heater from the danger of explosion and poisoning, and more effectively controls the gas Air Pollution Caused by Exhaust Gases from Water Heaters.
Guangdong JNOD New Energy Technology Co., LTD. has focused on the field of heat pump water heaters for many years, it commits to providing perfect service for every customer in the world.
The heat pump water heater uses a heat pump to absorb the air heat source to produce hot water. The energy saving efficiency is more than 3 times that of the electric water heater. It is more energy efficient than the solar water heater.
What is a direct heat pump water heater?
What are the characteristics of direct heat pump water heaters?
What is the main structure of the direct heat pump water heater?
The direct heat pump water heater is also known as the fast or fast heat pump water heater. The basic characteristics of the direct heat pump water heater are: cold water and superheated water, as long as the tap is turned on, the energy source will continuously supply hot water within a few seconds. Turn off the faucet when you don't need hot water.
According to different heating forms, direct heat pump electric water heaters can be divided into the following three types:
①, bare electric wire heating electric water heater;
②, electric film heating electric water heater;
③, electric heating tube heating electric water heater.
The heater of the direct heat pump water heateris set in a tank frame, which cannot withstand too high water pressure. At the same time, the left and right poles of the tank frame and the two poles introduced by the heating wire will be affected by water pressure for a long time. be damaged. Therefore, direct heating heat pump water heaters cannot be made into the post-system, but are all made into the front-system. In addition, in order to ensure the safe use of direct-heat heat pump water heaters and no dry burning occurs, a pressure sensing activation switch with water flow as a signal is installed at the cold water inlet, and the pressure sensing activation switch diaphragm can withstand the pressure. It is limited and cannot withstand pressure for a long time, so direct heat pump water heaters are generally made into the former system.
A typical direct heat pump water heater is mainly composed of a heating tank plate, a pressure sensor, a power regulator, a water volume adjustment faucet, a water inlet pipe and a water outlet pipe component, among which the heating tank plate is the key component of the direct heat pump water heater. It consists of a groove weight, a sealing ring, a cover and an electric heating element, and the electric heating element is located in the groove of the groove plate.
The direct heat pump water heater works by direct conduction heating. Since the electric heating element is placed in the groove of the groove plate, when the cold water flows through the groove, it can directly flow through the surface of the heating element to be heated. And because the water tank is like a snake, the cold water flowing into the water inlet is gradually heated, and hot water with a higher temperature can be obtained at the water outlet.
Guangdong JNOD New Energy Technology Co., LTD. can produce standard products under clients' brand, modify the products to satisfy client's personalized requirements and work together with clients to design and produce totally new products.
Air source heat pump water heaters are the same as the heating principle of air conditioners, they are all heat carriers. The air conditioner moves the outdoor heat into the room, and the air energy water heater moves the outdoor heat to the water tank to heat the cold water in the water tank. Because the heat in the air is free, the air energy water heater also saves electricity.
What is the operating mode and principle of the unit composition of the heat pump water heater?
What are the benefits of installing a heat pump water heater?
What is the difference between a heat pump water heater and an air conditioner?
The heat pump hot water unit is composed of a refrigeration cycle, including two parts: the main engine and the condenser. The main engine part includes evaporator, fan, compressor and expansion valve; the condenser is an incubator with condensing coils inside. The refrigerant absorbs the heat from the outside air in the evaporator and releases heat in the condensing coil through the heat pump cycle to heat the water in the water tank. The thermal insulation layer of the water tank is foamed with closed-cell rubber sponge or polyurethane, and has good thermal insulation performance.
1. Safety: No gas, no waste gas, and no "gas poisoning"; no electric heating rod for heating, there is no danger of leakage, and people's health and safety are protected.
2. Save money: The COP value is more than 3, the energy efficiency ratio is high, and it definitely saves electricity and money. It can save 2/3~3/4 of electricity expenses, or 1/2~2/3 of gas expenses and auxiliary heating expenses of solar water heaters.
3. Comfort: automatic constant temperature and pressure water supply, never hot and cold when using hot water, hot water has pressure, good comfort. All-weather supply of domestic hot water makes up for the embarrassment of solar energy when there is no hot water available in rainy days, nights, no sunlight, and freezing.
4. Environmental protection: The cold air discharged from the heat pump water heater is beneficial to reduce the room temperature.
Comparison of heat pump water heaters and air conditioners: The principle of heat pump water heaters and air conditioners is the same, but the technical content of heat pump water heaters is higher than that of air conditioners, which is why heat pump water heaters have only been listed in recent years. In general, heat pump water heaters are the product of the development of science and technology to a certain stage. The heat dissipation temperature of the air conditioner cannot work in an environment where the cooling temperature is 40~50°C, and the water temperature of the heat pump water heater can reach about 60°C or even higher.
Guangdong JNOD New Energy Technology Co., LTD., which has been established for several years, focuses on the production of heat pump water heaters. Here, you can find the heat pump water heaters you need.
Heat pump water heater is a new type of water heater. It converts air energy into heat energy through a heat pump to produce hot water. This water heater solves the disadvantage that solar energy cannot be used on rainy days. In addition, this water heater is more efficient compared to gas water heaters and electric water heaters. Environmental protection when you choose this water heater is a very good choice.
What is the main reason why air heat pump water heaters are popular in the market?
What is the workflow of a heat pump water heater?
What do you know about heat pump water heaters that can be used in hotels?
Air Source Water Heater is a new type of low carbon and environmentally friendly water heater. The operating cost of heat pump water heaters is only 1/4 of the cost of electric water heaters, which is very energy-saving and efficient. Originally, as a fourth-generation air water heater, its greatest feature is safety and money-saving! The operating costs of the air water heater are only 1/4 of the electric water heater, 1/6 of the gas water heater, 1/2 of the solar water heater, 2/3 of the fuel water heater and 3/5 of the gas heating system. The device absorbs the heat in the air to heat the cold water, and the cool air released does not pollute the environment and completely eliminates the safety risks such as flammability, explosion, electric shock and gas poisoning of ordinary water heaters.
1. The compressor compresses the low pressure refrigerant flowing back and converts it into a gas with high temperature and high pressure for discharge.
2. The high temperature and high pressure refrigerant gas flows through the copper pipe wrapped around the outside of the water tank, and the heat is passed through the copper pipe into the water tank. The cooled refrigerant becomes liquid under constant pressure and enters the evaporator after passing the expansion valve.
3. As the pressure of the evaporator is suddenly reduced, the liquid refrigerant is quickly evaporated into a gaseous state and absorbs a large amount of heat.
4. At the same time, under the action of the fan, a large amount of air flows through the outer surface of the evaporator, the energy in the air is absorbed by the evaporator, the air temperature drops quickly, and cold air is released and released.
5. The refrigerant that has absorbed a certain amount of energy is then returned to the compressor and enters the next circuit.
JNOD hot water heat pumps provide a highly efficient means of heating hot water for commercial and industrial applications. An average COP of 4.2 means that the energy efficiency is more than four times higher than that of conventional water heaters. It removes heat energy from the ambient air. This means savings of 60.75% of energy costs compared to electric water heaters.
Guangdong JNOD New Energy Technology Co., LTD. Provides marketing consulting services and business solutions to customers from over 40 countries. Customized solution for hot water supply based on the customer's market demand.
To celebrate 13th Anniversary of JNOD, we organized all of our staff to take a two-day-one-night travel to XiaChuan Island. Our staff,dressed up in customized dark blue clothes, departing with good spirit. We played games, sang songs on the bus. Three hours later after taking bus and boat, we arrived at the scenic spot.
The island has charming scenery. There are natural beaches with excellent sand quality, beautiful islands and bays, strange mountain scenery and stone forests, attractive scenic spots, dense primary secondary forests, animal and plant wonders and a complete variety of seafood treasures.
We have been serving our customers with spirit of hard working and good service for first 13 years. We wish JNOD will be even better and more prosperous in the next 10 years, 20 years and even more!
The hot water produced by the heat pump water heater is directly sent to the user through the circulation system as hot water supply or small area heating is carried out by using the fan exhaust pipe. Air source Heat Pump Hot Water Heater is currently the best solution for large, medium and small hot water centralized supply systems in school dormitories, hotels, bathing centers and other places.
Why choose Heat Pump Hot Water Heater?
Where is the better place to install the main unit and water tank of the Heat Pump Hot Water Heater?
What is Heat Pump Hot Water Heater?
1. Safety
The Heat Pump Hot Water Heater has the potential safety hazard of leakage, and the gas water heater has the danger of gas poisoning. Compared with these two water heaters, the air energy water heater exchanges heat through the medium, which avoids the direct contact between the electric heating element and the water, which solves the problem. Second, because the raw material of Heat Pump Hot Water Heater is air, it also eliminates the possibility of gas explosion or gas poisoning in gas water heaters, allowing people to use it more comfortably and worry-free.
2. Environmental protection
Energy saving and environmental protection complement each other, and environmental protection is another plus point of Heat Pump Hot Water Heater in its energy saving advantages. First of all, the air energy water heater uses electric energy to compress air to produce heat energy, and does not emit waste gas and toxic gas, which is not only safe, but also creates a pollution-free bathing environment. Secondly, the use time of Heat Pump Hot Water Heater is as long as 15-20 years. The long lifespan can not only reduce the cost and trouble for people to replace the water heater, but also reduce waste production in a sense, which is also an important aspect of environmental protection. aspect.
Answer: The Heat Pump Hot Water Heater is the best choice to install it on the balcony or bay window. The advantage is that it does not occupy indoor space, it is safe and stable, and the entire hot water piping system will have sufficient hot water; the host is installed in a ventilated and sunny place. it is good. Bay windows or wall hangings can allow the host to absorb heat from the air as much as possible to improve heating efficiency. It is understood that more than 90% of users will choose this installation method.
All-in-one Heat Pump Water Heaters and Split Type Heat Pump Water Heater are included in this hot water series, both on/off and inverter is available. Eco-friendly R32 and R410A refrigerant are adopted, as well the world famous Mitsubishi compressor. This series is widely used in residential and commercial hot water projects.
JNOD insisted on developing with technology innovation, it possessed of several national famous technicians and had invented multiply product patents. The company has been strictly implement the ISO international quality management system, and the products are of reliable guaranteed quality.
The operating principle of heat pump water heaters is very similar to that of air conditioning systems. It consumes a small amount of electrical energy to get the compressor running. The working fluid is compressed by the compressor into a liquid state with high temperature and high pressure, and then enters the condenser to release heat to heat the water. By circulating and heating in this way, the water can be heated from 50°C to 65°C.
What are the main components of heat pump water heaters?
How does the heat pump water heater work?
Why should the heat pump water heater be green?
Four main components of refrigeration technology: evaporator, compressor, condenser and throttling device.
Three stable parts: liquid storage tank (compressor), expansion valve (capillary tube), dry filter (filtering water and impurities)
A large piece of defrosting: four-way valve
Break through traditional energy conversion theory to achieve high energy efficiency:
When operating the heat pump, the working medium in the evaporator can absorb the energy QA stored in the ambient medium;
And starting the system must consume energy, that is, the power consumption of the QB compressor;
At the same time, the heat emitted from the working medium to the high temperature medium in the condenser is QC;
After the compressor input work starts the system, the mechanical kinetic energy becomes thermal energy. The energy output of the heat pump is thus the sum of the work done by the compressor QB and the heat absorbed by the heat pump from the environment QA; Enter a QB to get QB+QA and break the traditional bottleneck that conversion between different energies cannot achieve full efficiency; Heat pump technology is more energy efficient.
heat pump water heaters work according to the "reverse carnotic" principle, specifically the "outdoor unit" as a heat exchanger absorbs heat from the outside air, heats the low boiling working medium (refrigerant) and evaporates it, and the refrigerant vapor The water is compressed and heated by the compressor and enters the water tank, and the water in which the heat is released is condensed and liquefied and then throttled and pressurized to return to the outer heat exchanger to enter the next circuit. The heat pump water heater simply absorbs the heat in the air to heat the water, and the air that has absorbed the heat can also be used in the kitchen to solve the problem of stuffy heat.
The heat pump water heater has energy saving functions.
The biggest advantage of the heat pump water heater is undoubtedly the energy saving. The low-temperature thermal energy in the air is converted into high-temperature thermal energy by the compressor. Based on the same amount of hot water generation, the energy saving is maximized compared to the water heater with electric heating, and the cost of use is only 1/4 of the cost of electric water heater. Compared to gas water heaters, it consumes no gas fuel and the cost of use is only 1/3 of the cost of gas water heaters. heat pump water heaters take air as the main body and save energy, which not only saves people's usage cost, but also corresponds to the main body of energy saving in the world. This is one of the biggest highlights of air energy water heaters.
Guangdong JNOD New Energy Technology Co., LTD. Focus on research and development of heat pumps and electric boilers, manufacturing and providing comprehensive energy saving solutions.
There are 2 different ways an air source heat pump can provide heat in your home: by heating the air in the rooms or by heating the water in the central heating system, but which option is best for your home? We've compared these different heat pumps, to help you find out.
As the name suggests, air-to-water heat pumps use the ambient air outside of a property to heat the water in the central heating system. They are the more frequently seen air source heat pumps on the market, and come with several benefits and disadvantages.
Benefits of an air-to-water heat pump
Air-to-water heat pumps come with several benefits when compared to air-to-air heat pumps.
Compatible with traditional central heating systems
According to the English Housing Survey 2019-2020, 90% of households in the UK have central heating with radiators as their main heat source. That means, unless you're among the select few, you are going to want an air source heat pump that's compatible with your existing central heating system. Air-to-water heat pumps are designed with this very purpose in mind. Air-to-air heat pumps are not compatible.
Easier to install
As the air-to-water heat pumps will generally connect directly to the central heating system they are usually a lot easier to install than air-to-air heat pumps. Installing an air-to-water heat pump in a property with existing central heating is similar to replacing a boiler, whereas installing an air-to-air heat pump would require the installation of air ducts throughout the property.
Not just for heating
Although air source heat pumps are mainly considered for heating properties, that isn't the only thing they do. Air-to-water heat pumps will heat the water in your property for your central heating, but can also be combined with a hot water storage tank to provide hot running water too.
Disadvantages of an air-to-water heat pump
Air-to-water heat pumps don't just come with benefits, there are some disadvantages too.
More expensive
Air-to-water heat pumps are not cheap. Depending on the size of the unit you need and which manufacturer you pick, you could end up paying more than £10,000 for an air-to-water heat pump, excluding the cost of installation.
In comparison, you can get some air-to-air heat pumps for less than £1,000. Even if the cost of installation is high, you could still spend less on getting an air-to-air heat pump installed than you would on just buying the parts for an air-to-water heat pump.
Requires more space
In addition to the space a hot water storage tank would take up to allow for hot running water, due to radiators being required, air-to-water heat pumps still take up more room in the property than air-to-air heat pumps do. This isn't much of a problem if you already have radiators installed, but to maximize space in a new property air to air heat pumps are the better option.
In what sounds like a much simpler process, air-to-air heat pumps extract heat from the ambient air outside of a property and transfer it to the air inside of a property. If you'd like more detail on how air source heat pumps work, have a look at the following article: What is an air source heat pump?
Benefits of an air-to-air heat pump
There are several benefits to having an air-to-air heat pump rather than an air-to-water heat pump.
Heat and cool
As the air to air heat pumps is essentially air conditioning units that are capable of heating a property, they can also be used to cool a property when the weather is hot. Many manufacturers refer to them as climate control solutions because they aren't just for heating a property, they can cool it too.
Save space
Air-to-air heat pumps may require the installation of air ducts throughout the property, but once they have been installed, each room will feel more spacious. This is because there is no need for radiators which take up wall room and floor space. For newer, less spacious properties, air-to-air heat pumps could help you make the most of your space.
Less expensive
As mentioned earlier, air-to-air heat pump units are considerably cheaper than their air-to-water counterparts. Some air-to-water units can be 10 times more expensive than an air-to-air unit, which is something to think about.
Disadvantages of an air-to-air heat pump
Air-to-air heat pumps don't just come with benefits when compared to air-to-water heat pumps, there are some disadvantages too.
Not compatible with traditional central heating systems
If you have an existing central heating system and want to replace a gas boiler with an air-source heat pump, air-to-air heat pumps are not for you. As they only heat the air in a property, they cannot be connected to the central heating system and are completely incompatible.
Higher installation costs
Although like-for-like installation costs for both types of heat pump are generally quite similar, unless you have a property with existing air conditioning ducting, the cost of installing an air-to-air heat pump is likely to be higher as there will be more work to do.
No hot water
Air-to-air heat pumps do not heat the water in a property. This means you will need a secondary source of heat to provide hot running water throughout your home. While this is possible through solar power and other water heating solutions, it is still a separate cost that is avoided when installing an air-to-water heat pump.
Having learned the advantages and disadvantages of these air source heat pumps, you should now be able to make a decision on which would be best suited to your circumstances. However, as there is a lot to consider when getting an air source heat pump installed, we would recommend seeking the advice of a local heating engineer. They can ensure you get the right solution for your home's unique circumstances. Fortunately, we can help you find qualified engineers in your area, who will provide you with free, no-obligation quotes.
Swimming Pool Heat Pump is mainly used in constant temperature swimming pools, hot springs, saunas, foot baths, bathhouses, private villas and other constant temperature heating pools. It operates fully automatically, and its modular design is suitable for applications in various functions.
What is the advance in the Swimming Pool Heat Pump?
Why choose Swimming Pool Heat Pump?
How should the heating capacity of the Swimming Pool Heat Pump be obtained?
What are the advantages of Swimming Pool Heat Pump?
Swimming Pool Heat Pump has the characteristics of multi-function, energy saving and consumption reduction. The Swimming Pool Heat Pump in the swimming pool can not only recover the heat lost from the evaporation of the pool water through the constant temperature dehumidification heat pump during the dehumidification and air conditioning operation, but also reuse this part of the free heat to heat the pool water and air to make up for the pool water and air. The heat loss of the indoor swimming pool can be achieved to achieve the purpose of energy saving and cost reduction in the indoor swimming pool. There is also optional plasma sterilization and purification device to purify the air in an all-round way to create a fresh, clean and healthy indoor air environment.
Swimming Pool Heat Pump only requires the user to set parameters such as space target temperature, pool target water temperature, space target humidity, and space carbon dioxide target concentration, and then select the automatic mode. With the priority level set by the program, the automatic operation meet all the requirements required by the user. Swimming Pool Heat Pump has stable operation, safety and environmental protection, and the average cost saving is 40%~60%, and the energy saving effect is obvious. Swimming Pool Heat Pump is suitable for large swimming pools, such as gymnasiums, athlete training halls, water entertainment and leisure places, etc. The three-in-one heat pump cabinet type is suitable for new and renovated indoor swimming pool projects such as private swimming pools, senior club swimming pools, hotels, etc.
1. The basic situation of the swimming pool (area, water depth, indoor or outdoor, and the following will take indoor as an example)
2. The temperature of the place (initial water temperature, wind speed on the water surface of the pool, local atmospheric pressure, etc.)
3. Set the target temperature for heating (26℃~28℃)
4. The heat loss caused during the heat transfer process includes: the heat lost by evaporation on the surface of the pool water, the heat lost by conduction from the pool wall and the bottom of the pool, and the heat lost by pipes and equipment.
JNOD which has insisted on developing with technology innovation possessed several national famous technicians and had invented multiply product patents. The company has been strictly implementing the ISO international quality management system, and the products are of reliable guaranteed quality.
Compared with the traditional swimming pool heating method, the biggest advantage of Swimming Pool Heat Pump is that it can effectively improve the heating speed and constant temperature of the swimming pool, making the swimming pool water heating safer, more energy-saving and faster, so as to meet the different heating temperature requirements of the swimming pool.
Is the Swimming Pool Heat Pump safe to use?
What are the application advantages of Swimming Pool Heat Pump?
What are the benefits for consumers of the application of Swimming Pool Heat Pump?
Swimming Pool Heat Pump relies on the "reverse Carnot" principle to work, using clean and renewable raw materials (air energy + electricity) as energy, neither generating harmful gases to the human body nor causing pollution to the atmosphere. With only a small amount of electricity input, a large amount of heating benefits can be obtained, providing a 24-hour constant temperature for the swimming pool.
From the perspective of energy saving and safety, Swimming Pool Heat Pump is an ideal choice for indoor swimming pool heating equipment. It is powerful, stable and efficient. It adopts high-efficiency titanium bubble heat exchanger, which has high efficiency, corrosion resistance and ultra-high energy efficiency. Refrigeration accessories, high operating efficiency and energy saving. And it is safe and reliable, water and electricity are completely separated; it can also intelligently control, realize independent temperature control, intelligent defrosting, etc. It is widely used in various swimming pools, hotel swimming pools, SPA, hot springs, bubble pools, etc., and it is easy to use.
Swimming Pool Heat Pumpdoes not discharge any pollutants during operation, and there are no safety hazards such as fire, explosion, poisoning, etc., which is very safe and environmentally friendly. As a professional swimming pool constant temperature equipment, Tongyi Air Energy swimming pool special constant temperature heat pump is equipped with a triple disinfection filter protection system, which can automatically complete disinfection, adjust pH value, and collect tiny dirt and suspended particles (such as dandruff, dust, etc. in swimming pool water) ), hair and other pollutants, not only to ensure the cleanliness of the swimming pool water, but also to protect the normal operation of subsequent equipment, effectively reducing the workload of the staff. For swimming pool operators, Swimming Pool Heat Pump saves more than 65% of operating costs compared to hot water equipment using other energy sources, and the unit is fully automatic and intelligent, which greatly reduces labor costs.
The Swimming Pool Heat Pump keeps the indoor heated swimming pool at a constant temperature of 26-28 degrees. Normal swimming pools use cold water. Due to the low water temperature (0-10 degrees in winter, 10-20 degrees in summer), not many people can swim in cold water, especially children, the possibility of catching a cold is very high. The constant temperature swimming pool is heated by heating equipment and maintains a temperature of 26-28 degrees throughout the year, which is suitable for the human body and allows you to say goodbye to the risk of swimming colds.
Guangdong JNOD New Energy Technology Co., LTD. focuses on heat pump& electric boiler R&D, manufacturing and providing comprehensive energy-saving solutions.
Air source heat pump water heaters are the same as the heating principle of air conditioners, they are all heat carriers. The air conditioner moves the outdoor heat into the room, and the air energy water heater moves the outdoor heat to the water tank to heat the cold water in the water tank. Because the heat in the air is free, the air energy water heater also saves electricity.
What is the operating mode and principle of the unit composition of the heat pump water heater?
What are the benefits of installing a heat pump water heater?
What is the difference between a heat pump water heater and an air conditioner?
The heat pump hot water unit is composed of a refrigeration cycle, including two parts: the main engine and the condenser. The main engine part includes evaporator, fan, compressor and expansion valve; the condenser is an incubator with condensing coils inside. The refrigerant absorbs the heat from the outside air in the evaporator and releases heat in the condensing coil through the heat pump cycle to heat the water in the water tank. The thermal insulation layer of the water tank is foamed with closed-cell rubber sponge or polyurethane, and has good thermal insulation performance.
1. Safety: No gas, no waste gas, and no "gas poisoning"; no electric heating rod for heating, there is no danger of leakage, and people's health and safety are protected.
2. Save money: The COP value is more than 3, the energy efficiency ratio is high, and it definitely saves electricity and money. It can save 2/3~3/4 of electricity expenses, or 1/2~2/3 of gas expenses and auxiliary heating expenses of solar water heaters.
3. Comfort: automatic constant temperature and pressure water supply, never hot and cold when using hot water, hot water has pressure, good comfort. All-weather supply of domestic hot water makes up for the embarrassment of solar energy when there is no hot water available in rainy days, nights, no sunlight, and freezing.
4. Environmental protection: The cold air discharged from the heat pump water heater is beneficial to reduce the room temperature.
Comparison of heat pump water heaters and air conditioners: The principle of heat pump water heaters and air conditioners is the same, but the technical content of heat pump water heaters is higher than that of air conditioners, which is why heat pump water heaters have only been listed in recent years. In general, heat pump water heaters are the product of the development of science and technology to a certain stage. The heat dissipation temperature of the air conditioner cannot work in an environment where the cooling temperature is 40~50°C, and the water temperature of the heat pump water heater can reach about 60°C or even higher.
Guangdong JNOD New Energy Technology Co., LTD., which has been established for several years, focuses on the production of heat pump water heaters. Here, you can find the heat pump water heaters you need.