Swimming Pool Heat Pump is used to maintain the temperature of swimming pool water. Swimming Pool Heat Pump, because the indoor swimming pool generally maintains the water temperature at 26℃~28℃ and the air temperature at 28℃~30℃ (the air temperature is 1℃~2℃ higher than the water temperature).

What is the reason for the continued popularity of the Swimming Pool Heat Pump?

Why is Swimming Pool Heat Pump in demand?

What metrics should be considered for Swimming Pool Heat Pump?

What is the reason for the continued popularity of the Swimming Pool Heat Pump?

Not only swimming pools, but also from hotels to fitness clubs, heated swimming pools are becoming more and more indispensable, and the power consumption of constant temperature heating equipment has become one of the power consumption concerns of swimming pool owners, and its operating cost should not be underestimated.

Faced with the phenomenon that the market is in short supply, for many swimming pool owners who are eager to generate income, how to improve the energy efficiency utilization rate of the swimming pool constant temperature heat pump, ensure the efficient operation of the swimming pool in the low temperature climate, extend the popularity to the four seasons, and realize the full swimming pool. Annual business has become a key upgrade direction.

Why is Swimming Pool Heat Pump in demand?

Since the water temperature of indoor swimming pools is generally kept at 26°C~28°C, and the air temperature is kept at 28°C~30°C (the air temperature is 1°C~2°C higher than the water temperature), for lighting needs, the walls are mostly glass walls or glass structures. Because the pool water contains a lot of chlorine, with the continuous evaporation of the water in the pool, the air humidity is high, and the humid air causes a lot of condensation on the walls or glass, which is bound to cause strong corrosion to the interior decoration of the building. In addition, because humid air contains a large number of viruses, bacteria and other elements that reduce air quality, it can make it difficult for people to breathe, so indoor swimming pool temperature and humidity control are getting more and more attention. Swimming Pool Heat Pump has also attracted the attention of consumers.

What metrics should be considered for Swimming Pool Heat Pump?

Swimming Pool Heat Pump considers indoor air quality, and the constant temperature heat removal pump unit is equipped with fresh air treatment function and exhaust air function.

Swimming Pool Heat Pump considers the operating cost of the constant temperature heat removal pump unit. In the spring and autumn, a large amount of outdoor low-humidity fresh air can be used to adjust the humidity of the indoor air to reduce the operating cost.

In order to prevent the circulating air from affecting the service life of the equipment, the key components and sheet metal structure of the Swimming Pool Heat Pump are treated with anti-corrosion during the manufacturing process, and the compressor, power distribution cabinet and control system are isolated from the wind system.

After reading, do you have a deeper understanding of Swimming Pool Heat Pump? For further information, please contact Guangdong JNOD New Energy Technology Co., LTD.

Air heat pump water heater has low energy consumption (power consumption saves more than 2/3 compared to conventional electric water heaters), high thermal efficiency (heating speed is four times higher than conventional electric water heaters), Environmental protection and energy saving (reduces more than 2/3 compared to conventional electric water heaters) carbon dioxide emissions).

What are the differences between heat pump water heaters and air conditioners?

Why do heat pump water heaters improve the consumer experience?

What is the working process of the heat pump water heater?

What are the differences between heat pump water heaters and air conditioners?

The operating mode of the heat pump water heater is very different from that of the air conditioner, which determines the difference in the design concept between the heat pump compressor and the air conditioner compressor. Trouble-free, long-term stable operation of heat pump water heaters Compared to air conditioning systems, there is a big difference in the operating time. The operating time of heat pump water heater systems is much longer than that of air conditioning systems. The operating time of a heat pump water heater depends on the following factors: Air conditioning systems are often used in summer, but water heaters are mass-produced and run particularly long in winter. The time for heating a water tank in winter is several times as long as in summer, so it is necessary to confirm the operating mode of the heat pump water heater in winter.

Why do heat pump water heaters improve the consumer experience?

According to statistical calculations, 2/3 of the service life of the heat pump water heater is consumed in winter. Since the water outlet temperature of the heat pump is over 55°C, the temperature of the water tank decreases when using. The liquefaction temperature is the main factor affecting the service life of the compressor. Under the condition of simultaneous operation, the total load of the compressor in the heat pump water heater is much higher than that of the compressor in the air conditioning system. The main motivation for consumers to buy water heaters with heat pump is energy saving and comfort. Consumers will thus consume more water, which also extends the working time of the heat pump. If the heat pump water heater is used for heating and service water applications, it can run for a long time during the heating period. From the combination of the above factors, it is evident that the main motor of the heat pump water heater will develop in the direction of miniaturization, and the actual operating time will be greatly extended.

What is the working process of the heat pump water heater?

A water heater with compression heat pump mainly consists of evaporator, compressor, condenser and expansion valve. Thermal Circular Process Throttling → Re-evaporation, whereby heat from the environment is transferred to the water.

Guangdong JNOD New Power Technology Co., LTD. sales team has extensive experience in overseas markets. We provide sincere and professional services, including OEM/ODM/project services, technology support, market analysis, use of design and assembly of installation. We have provided marketing consulting services and business solutions to customers from over 40 countries.

Does heat pump consume electricity a lot ?

The answer to this question is of great concern to consumers and JNOD's answer is that air source heat pumps are a very energy efficient new energy heating device, compared to other electric heating devices on the market.

Heat pumps require some electricity to operate, but the amount is relatively small. 

The air source heat pump type works by using a small amount of electricity to drive the compressor to run and put the whole heat pump system into operation.

 

Heat is continuously absorbed from the air through the evaporator. 

Finally the heat absorbed and the heat generated by the electricity consumed is transferred to the water through the condenser.

We usually measure the efficiency of a heat pump in terms of COP. 

This unit is determined by measuring the energy input (in this case, electricity) and the energy output (heat). 

A heat pump with a CoP of 3 can produce 3 kW of heat from every 1 kW of electricity. 

Modern heat pump systems can transfer three to four times more heat energy in the form of heat than they consume in electrical energy to do this job. 

Other electric heating products such as the boiler, which has a COP = 1, mean that as much electricity as you want to produce heat is consumed. 

So choose a product with a COP greater than 1 (JNOD's heat pump) and you'll save on your energy bills!

Furthermore, JNOD's heating and cooling heat pump has Inverter EVI technology, which will allow the heat pump to adjust its operating power according to the ambient temperature, which will be even better.

There are many different factors will influence on your heat pump's electricity consumption, for example lifestyle, size of heat pump, heating space size,etc. 

Don't hesitate to contact JNOD for further advice and discussion on heat pump.

Heating and Cooling Heat Pump is a central air-conditioning unit that uses air as a cooling (heat) source and water as a circulating medium to transfer energy. Its advantages are that it is easy to install and use, and it can be used after connecting to the power supply, saving a complex cooling water system and a boiler heating system.

Compared with other products of the same type, why is Heating and Cooling Heat Pump cost-effective?

What are the common Heating and Cooling Heat Pumps on the market?

What to look for when choosing a Heating and Cooling Heat Pump?

Compared with other products of the same type, why is Heating and Cooling Heat Pump cost-effective?

Compared with electric boilers, Heating and Cooling Heat Pump can save more than 50% of power consumption, and reduce the trouble of frequent replacement of electric heating tubes; Compared with traditional coal boilers and oil-fired boilers, Heating and Cooling Heat Pump is pollution-free, emission-free, and safe , eliminating the need for annual routine security inspections, eliminating the need for professional boiler workers, fully automatic temperature control, and significantly reducing operating costs by more than 50%. Heating and Cooling Heat Pump completes a heat pump for heating and cooling needs in a particular field. Generally speaking, Heating and Cooling Heat Pump uses specialized heat pump compressors, special refrigerants and systems.

What are the common Heating and Cooling Heat Pumps on the market?

There are many types of heat pump water heaters on the market, mainly including three series of solar boost type, water source and air source. Solar-assisted heat pump is a heat pump technology that combines heat pump and solar energy technology; water source heat pump uses a certain temperature water source (above 20 ℃) as a heat source and uses refrigerant as a medium to absorb the heat in the water source and then compress it by a compressor. For heating, exchange heat with cold water through a heat exchanger to achieve the purpose of heating and producing hot water. The water source heat pump must have a water source with a certain temperature and flow; the air source heat pump obtains heat from the air in a similar way to the water source heat pump to heat water. Among the three types of heat pumps, the air source heat pump is subject to the least restriction and has the largest development space.

What to look for when choosing a Heating and Cooling Heat Pump?

Whether the Heating and Cooling Heat Pump saves electricity has a lot to do with outdoor temperature, building insulation, user usage, equipment purchase and installation. If you want to save more electricity, users not only need to carefully select air source products, such as buying big brands as much as possible, finding professionally qualified installers for installation, etc., but also mastering the correct air source heat pump heating method, in order to achieve high efficiency and energy saving.

Guangdong JNOD New Energy Technology Co., LTD. has various Heating and Cooling Heat Pumps that can provide the increasing of products, and make them more effective, reliable, and consistent.

More and more people choose heat pump water heatersbecause air energy is the most energy-efficient, that is, the lowest operating cost, compared to most water heaters that consume electricity and gas.

How does the heat pump water heater achieve the effect of saving energy?

What should we pay attention to when using heat pump water heater?

What are the operational advantages of heat pump water heaters?

How does the heat pump water heater achieve the effect of saving energy?

When the heat pump water heater is working, the energy QA stored in the ambient medium is absorbed in the evaporator; it consumes a part of the energy itself, that is, the compressor consumes power QB; the heat release QC is carried out in the condenser through the working fluid circulation system, QC=QA+QB, it can be seen that the energy output by the heat pump is the work QB done by the compressor and the heat QA absorbed by the heat pump from the environment; therefore, the use of heat pump technology can save a lot of electric energy.

What should we pay attention to when using heat pump water heater?

temperature, water consumption

Put the bath water in the heat pump water heater. The most suitable water temperature is 42°C. It can be slightly higher by 1-2°C for middle-aged and elderly people. The water for showering is about 40~50 liters per person. Bathtubs and Jacuzzis are determined by capacity.

How much hot water can be made

In terms of product performance and theory, the heat pump water heater can be cycled back and forth to continuously produce hot water. Under normal temperature, the hot water can be produced per hour as follows (45℃-55℃): It depends on the size of the unit.

What are the operational advantages of heat pump water heaters?

The heat pump water heater absorbs the low-temperature heat in the air, vaporizes it through the fluorine medium, and then compresses it through the compressor to heat up and pressurize it. The air energy water heater has the characteristics of high efficiency and energy saving. The same amount of hot water produced is 4-6 times that of the electric water heater. Its annual average thermal efficiency ratio is 4 times that of the electric heating, and the energy efficiency is high.

The heat pump water heater overcomes the shortcomings of solar water heaters that rely on sunlight for heating and inconvenient installation. Since the work of the air energy water heater is to exchange heat through the medium, it does not need the electric heating element to be in direct contact with the water, which avoids the danger of electric water heater leakage, and also prevents the gas water heater from the danger of explosion and poisoning, and more effectively controls the gas Air Pollution Caused by Exhaust Gases from Water Heaters.

Guangdong JNOD New Energy Technology Co., LTD. has focused on the field of heat pump water heaters for many years, it commits to providing perfect service for every customer in the world.

The basic principle and characteristics of Swimming Pool Heat Pump. It is based on the basic principle of the reversed Carnot cycle, using a small amount of electricity to drive a device that transfers heat from a low-temperature heat source to a high-temperature heat source.

What are the advantages of Swimming Pool Heat Pump?

What is the current development trend for Swimming Pool Heat Pump?

What is the working physics of the Swimming Pool Heat Pump?

What are the advantages of Swimming Pool Heat Pump?

1. The water temperature of the Swimming Pool Heat Pump can be set freely, and the scope of application is wider, and it can be flexibly applied to various engineering needs.

2. Swimming Pool Heat Pump uses Copeland scroll compressor, which has high efficiency, low vibration, convenient maintenance and low operational risk.

3. Swimming Pool Heat Pump has a wide operating temperature range and is more reliable in application.

4. Swimming Pool Heat Pump adopts the parallel design of compressors, which makes the operation more stable and the failure rate is lower. Even if one of them fails, the unit can still operate, reducing operational risks.

5. Swimming Pool Heat Pump meets all-around application, with cooling, heating and hot water functions.

What is the current development trend for Swimming Pool Heat Pump?

In the competition and iteration of many heating methods, Swimming Pool Heat Pump has become the mainstream choice of swimming pool business in recent years with the characteristics of clean energy and high energy efficiency. In the past, the Swimming Pool Heat Pump was limited by technology, and as the temperature dropped, its heat pump performance also declined. Facing the requirement of constant temperature swimming pools to operate in four seasons, energy saving and high efficiency, the industry rookie frequency conversion Swimming Pool Heat Pump subversively refreshes the annual energy efficiency performance of Swimming Pool Heat Pump, stunning the market.

What is the working physics of the Swimming Pool Heat Pump?

Swimming Pool Heat Pump is a high-quality product specially developed for indoor swimming pools. It integrates air conditioning, dehumidification, pool water heating, heat energy recovery, and fresh air treatment. It recovers and comprehensively utilizes energy in a large amount, and overcomes many problems such as high humidity and high chlorine environment. The change of different operation modes in spring, summer, autumn and winter achieves efficient and energy-saving operation.

Swimming Pool Heat Pump can fully control indoor relative humidity at 50~75%, air temperature at 27~30℃, water temperature at 26~40℃, and advanced intelligent ventilation control to maintain a high-quality indoor comfortable environment. Widely used in dry swimming pools, hot spring resorts, hotels, clubs, other fields, factories, schools and other fields that require dehumidification and constant temperature.

The working principle of Swimming Pool Heat Pump is to recycle the evaporative heat loss on the surface of the pool water, transfer it into the pool water and air, make up for the heat loss of the pool water and air, and realize the function of air conditioning and dehumidification at the same time.

Guangdong JNOD New Energy Technology Co., LTD. has various Swimming Pool Heat Pumps that can provide the best quality, and make people feel more comfortable, reliable, and consistent.

With the continuous improvement of social and economic level, my country's air energy industry has ushered in a period of rapid development, and the scope of application of Swimming Pool Heat Pump products is also expanding. With the advantages of safety, energy saving and constant temperature, Swimming Pool Heat Pump has gradually become a better choice for swimming pools, gymnasiums, bathing centers and other places to solve the problem of constant temperature heating.

How does the Swimming Pool Heat Pump work?

What are the features of Swimming Pool Heat Pump?

Why choose the right Swimming Pool Heat Pump?

How does the Swimming Pool Heat Pump work?

Swimming Pool Heat Pump is a new type of high-efficiency energy-saving constant temperature heating equipment. It is a device that uses a small amount of electricity to drive heat from a low-temperature heat source to a high-temperature heat source based on the basic principle of reversed Carnot cycle. During operation, 1 part of energy is consumed, and 4 parts of energy (heat) are absorbed and transferred from the ambient air to the water, which saves 3/4 of the electricity compared to the water heater.

What are the features of Swimming Pool Heat Pump?

1. Swimming Pool Heat Pump, using advanced titanium alloy heat exchanger, has strong internal corrosion and can resist the erosion of chloride ions in water.

2. Swimming Pool Heat Pump is flexible in design and easy to install: integral design, beautiful and compact unit, small installation area.

3. The Swimming Pool Heat Pump project is easy to install, and the operation and maintenance costs are low.

4. The energy efficiency ratio of Swimming Pool Heat Pump is as high as 5.0, leading the industry.

5. Swimming Pool Heat Pump, using international environmentally friendly refrigerants (R410A/R417A), energy saving and environmental protection, no pollution to the environment.

6.Swimming Pool Heat Pump, super quiet, provide comfortable temperature.

Why choose the right Swimming Pool Heat Pump?

From "heating is too slow", "heating can't keep up with heat dissipation, the constant temperature feeling is useless", and even "the equipment uses electricity and does not dare to open it often", these problems may be caused by the wrong selection of Swimming Pool Heat Pumps. Therefore, when choosing a suitable Swimming Pool Heat Pump for a swimming pool, we must scientifically evaluate the required heating capacity of the swimming pool in the two stages of initial heating and constant temperature, and choose the one with greater demand as the basis for matching selection.

Under normal circumstances, the heating amount in the initial heating stage of the swimming pool will be higher than that in the constant temperature stage. Therefore, the first step in the selection of Swimming Pool Heat Pump is to understand the heating capacity required for the initial heating of the swimming pool.

JNOD has a complete heat pump industry chain, and its products involve Swimming Pool Heat Pump, House Heating & Cooling Heat Pump, Domestic Hot Water Heat Pump, Heat Pump Dehumidifier, Commercial & Industrial High Temperature Water Heating Solution, Industrial and Agricultural Heat Pump Dryer, etc.

Air source heat pump water heaters are the same as the heating principle of air conditioners, they are all heat carriers. The air conditioner moves the outdoor heat into the room, and the air energy water heater moves the outdoor heat to the water tank to heat the cold water in the water tank. Because the heat in the air is free, the air energy water heater also saves electricity.

What is the operating mode and principle of the unit composition of the heat pump water heater?

What are the benefits of installing a heat pump water heater?

What is the difference between a heat pump water heater and an air conditioner?

What is the operating mode and principle of the unit composition of the heat pump water heater?

The heat pump hot water unit is composed of a refrigeration cycle, including two parts: the main engine and the condenser. The main engine part includes evaporator, fan, compressor and expansion valve; the condenser is an incubator with condensing coils inside. The refrigerant absorbs the heat from the outside air in the evaporator and releases heat in the condensing coil through the heat pump cycle to heat the water in the water tank. The thermal insulation layer of the water tank is foamed with closed-cell rubber sponge or polyurethane, and has good thermal insulation performance.

What are the benefits of installing a heat pump water heater?

1. Safety: No gas, no waste gas, and no "gas poisoning"; no electric heating rod for heating, there is no danger of leakage, and people's health and safety are protected.

2. Save money: The COP value is more than 3, the energy efficiency ratio is high, and it definitely saves electricity and money. It can save 2/3~3/4 of electricity expenses, or 1/2~2/3 of gas expenses and auxiliary heating expenses of solar water heaters.

3. Comfort: automatic constant temperature and pressure water supply, never hot and cold when using hot water, hot water has pressure, good comfort. All-weather supply of domestic hot water makes up for the embarrassment of solar energy when there is no hot water available in rainy days, nights, no sunlight, and freezing.

4. Environmental protection: The cold air discharged from the heat pump water heater is beneficial to reduce the room temperature.

What is the difference between a heat pump water heater and an air conditioner?

Comparison of heat pump water heaters and air conditioners: The principle of heat pump water heaters and air conditioners is the same, but the technical content of heat pump water heaters is higher than that of air conditioners, which is why heat pump water heaters have only been listed in recent years. In general, heat pump water heaters are the product of the development of science and technology to a certain stage. The heat dissipation temperature of the air conditioner cannot work in an environment where the cooling temperature is 40~50°C, and the water temperature of the heat pump water heater can reach about 60°C or even higher.

Guangdong JNOD New Energy Technology Co., LTD., which has been established for several years, focuses on the production of heat pump water heaters. Here, you can find the heat pump water heaters you need.

2022-11-23 · 2022 New Low Ambient Temperature Area (low to -25C) High Efficient Evi Air to Water Heat Pump 9.5kw--40kw with WiFi US

InverSmart 13kw Inverter Swimming Pool Heat Pump. 1kw Input Provides Up To 13kw Output. Full Step less Inverter Mitsubishi Compressor. Patented Unique Front Air-Stream Fanless Design. Wi-Fi App Controlled. March To October Swimming Season. All Year Round Pool Heating Option -

2022-11-23 · XTB-04 Explosion-Proof Remote Sensing ThermostatXTB-04 Explosion-Proof Remote Sensing Thermostat. Heating Systems. See More. XTB-12 Explosion-Proof Remote Sensing Thermostat (Process Heating Applications) XTB-12 Explosion-Proof Remote Sensing Thermostat (Process Heating Applications) Heating Systems. See More.

Hot Water Heater Heat Pump Manufacturers, Factory, Suppliers From China, Because we stay in this line about 10 years. We got suppliers support on quality and price. We excluded poor quality suppliers. Now many OEM factories cooperated with us too.

2022-11-19 · Household 5~9KW metal shell Air to water pool spa heat pump BS15-013S 016S 020S. 1. Both water heating

2022-10-27 · Air to water heat pump water heater commercial use EVI Low Temperature Air source High Temp 80C Heat Pump 60hz BLH36-035S EVI technology air to water heat pump for chilly area 24KW 28KW Swimming Pool Spa Heat Pump with Multiple Protection BS35-055S 065S Household 5~9KW metal shell Air to water pool spa heat pump BS15-013S 016S 020S

7kw to 25kw R32 inverter swim pool heat pump 3 - 49 Sets

Innovation, excellent and reliability are the core values of our business. These principles today additional than ever form the basis of our success as an internationally active mid-size firm for …