The basic principle and characteristics of Swimming Pool Heat Pump. It is based on the basic principle of the reversed Carnot cycle, using a small amount of electricity to drive a device that transfers heat from a low-temperature heat source to a high-temperature heat source.
What are the advantages of Swimming Pool Heat Pump?
What is the current development trend for Swimming Pool Heat Pump?
What is the working physics of the Swimming Pool Heat Pump?
1. The water temperature of the Swimming Pool Heat Pump can be set freely, and the scope of application is wider, and it can be flexibly applied to various engineering needs.
2. Swimming Pool Heat Pump uses Copeland scroll compressor, which has high efficiency, low vibration, convenient maintenance and low operational risk.
3. Swimming Pool Heat Pump has a wide operating temperature range and is more reliable in application.
4. Swimming Pool Heat Pump adopts the parallel design of compressors, which makes the operation more stable and the failure rate is lower. Even if one of them fails, the unit can still operate, reducing operational risks.
5. Swimming Pool Heat Pump meets all-around application, with cooling, heating and hot water functions.
In the competition and iteration of many heating methods, Swimming Pool Heat Pump has become the mainstream choice of swimming pool business in recent years with the characteristics of clean energy and high energy efficiency. In the past, the Swimming Pool Heat Pump was limited by technology, and as the temperature dropped, its heat pump performance also declined. Facing the requirement of constant temperature swimming pools to operate in four seasons, energy saving and high efficiency, the industry rookie frequency conversion Swimming Pool Heat Pump subversively refreshes the annual energy efficiency performance of Swimming Pool Heat Pump, stunning the market.
Swimming Pool Heat Pump is a high-quality product specially developed for indoor swimming pools. It integrates air conditioning, dehumidification, pool water heating, heat energy recovery, and fresh air treatment. It recovers and comprehensively utilizes energy in a large amount, and overcomes many problems such as high humidity and high chlorine environment. The change of different operation modes in spring, summer, autumn and winter achieves efficient and energy-saving operation.
Swimming Pool Heat Pump can fully control indoor relative humidity at 50~75%, air temperature at 27~30℃, water temperature at 26~40℃, and advanced intelligent ventilation control to maintain a high-quality indoor comfortable environment. Widely used in dry swimming pools, hot spring resorts, hotels, clubs, other fields, factories, schools and other fields that require dehumidification and constant temperature.
The working principle of Swimming Pool Heat Pump is to recycle the evaporative heat loss on the surface of the pool water, transfer it into the pool water and air, make up for the heat loss of the pool water and air, and realize the function of air conditioning and dehumidification at the same time.
Guangdong JNOD New Energy Technology Co., LTD. has various Swimming Pool Heat Pumps that can provide the best quality, and make people feel more comfortable, reliable, and consistent.
Interclima is coming~
Interclima is the living history of all stakeholders in the sector HVAC in building: manufacturers, distributors, installers, consultants and project managers, maintenance and operating companies, contractors … As part of the Mondial du Bâtiment, it also shines internationally. The technology and equipment of renewable energy , the quality of indoor air nd ventilation, heating and hot water.
The INTERCLIMA 2022 will take place on 4 days from Monday, 03. October to Thursday, 06. October in Paris. The JNOD team is exhibiting with our latest boiler, Heat pump products, booth number is Pav.3-E111, welcome to visit us to discover our new products.
· From Monday 3 to Thursday 6 October 2022
· Venue: Paris Porte de Versailles (VIPARIS)
· City: Paris
· Booth Number: Pav.3-E111
A swimming pool heat pump works to keep a constant pool temperature and extend the swimming season. According to Arizton’s report, the pool heat pump market is expected to grow at a CAGR of over 5% during 2019−2025.
JNOD has our swimming pool heat pump to meet the market request.
For the swimming pool heat pump,we have the:
Residential on/off swimming pool heat pump,we can make the heating capacity from 3KW to 25kw.
Residential inverter swimming pool heat pump,we can make the heating capacity from 5kw to 28kw.
We can have the R32 and R410A model,we can make both plastic and metal out case.
It’s with 4 ways valve,provide both heating and cooling mode to create more possibility for pool enjoyment.The high performance, energy-efficient pool heat pump quietly and economically allows you to swim comfortably throughout the year!
Some customers may ask what’s the different between Residential on/off and inverter swimming pool heat pump.
It is very similar to the concept of air conditioning inverter technology.
On/Off is defined as “all or nothing “,the input power or the heating capacity keeps the same.
For the inverter system ,Unlike ON/OFF heat pump with single-speed compressor which by switching on and off periodically to adjust the performance of the heating & cooling, full inverter heat pump uses a variable speed compressor which can automatically adjust the output needed at the lowest consumption of power and maintain the best temperature at different climatic conditions. When the heating demand is high, the inverter compressor and the fan motor will start running at a high speed, inversely, they will run at a low speed.
The advantages included:
1.Achieve an extremely high COP.
2.Shorten heating time.
3.Greatly save energy and cut down electricity bill.
4.Contribute to a quiet neighbor environment.
Some customer told me,their swimming pool is not very big.
Here come a mini swimming pool heat pump will be suitable for you.
We have both 3KW and 5KW heating capacity model.
The mini heat pump is designed for above-ground pools.It’s light and easy to install,can be portable every where.Equipped with a plug & play power connection.
Besides the Residential swimming pool heat pump model,we also have the commercial swimming pool heat pump with full inverter technology meets your comfort needs coupled with energy-efficient operation, which is applied in commercial settings, including water parks, hotels, gyms, and so on.
OEM and ODM project are acceptable.Just contact JNOD sales team to get more information.
In this era of carbon neutrality and carbon peak, people began to understand the concept of environmental protection and began to implement environmental protection policies, such as the use of environmentally friendly and energy-saving products in life, etc. Even the swimming pool water treatment industry has paid more attention to the environmental protection and energy-saving performance of Swimming Pool Heat Pump.
What are the structural features of the Swimming Pool Heat Pump?
Why is Swimming Pool Heat Pump a cost-effective choice?
Why do Swimming Pool Heat Pumps need an anti-condensation system?
1. In line with environmentally sustainable development strategy
Swimming Pool Heat Pump adopts environmentally friendly R407C refrigerant fluorine-free system, which saves energy and reduces emissions, and uses free green energy without pollution.
2. Plasma sterilization, 360 purify air
The Swimming Pool Heat Pump can choose the original plasma sterilization and purification technology, which actively generates a large number of active hydroxide ions, surrounds and adsorbs the bacteria and destroys the protein structure on the surface of the bacteria, so as to achieve the effect of sterilization and purification.
Box structure of Swimming Pool Heat Pump, independent and beautiful
The panel is made of GI galvanized steel material, embedded with polyurethane (PU) fire-proof, sound-insulating and heat-insulating material, and the inside and outside are sprayed with anti-corrosion spray; , The refrigerant compression system accessories are separated from the air duct system of the heat pump independently to avoid corrosion by ammonia-containing air, ensure a longer service life of the heat pump, and facilitate disassembly and maintenance.
①Pressure protection: high pressure protection, low pressure protection, water filling protection;
②Temperature protection: Excessive exhaust temperature protection, compressor overcut protection, hot water temperature protection
③ Power protection: lack/reverse phase protection, compressor overload protection.
① The anti-condensation sensor of Swimming Pool Heat Pump can avoid condensation and condensation on the inner surface of indoor glass windows and walls. When the temperature at the indoor anti-condensation dew point is too low, the anti-condensation sensor installed in the place will fed back the information to the unit control system so that the unit can re-adjust the indoor relative humidity, so that the temperature here is higher than the dew point temperature to prevent condensation.
② If there are parts that are particularly prone to condensation and condensation in the swimming pool space, the Swimming Pool Heat Pump can be equipped with a special anti-condensation and condensation system to ensure that the temperature of the condensation-prone parts of the swimming pool is above the dew point temperature.
JNOD has a complete heat pump industry chain, and its products involve Swimming Pool Heat Pump, House Heating & Cooling Heat Pump, Domestic Hot Water Heat Pump, Heat Pump Dehumidifier, Commercial & Industrial High Temperature Water Heating Solution, Industrial and Agricultural Heat Pump Dryer, etc. The ultra-low temperature EVI heat pump has been widely used, too.
Heating and Cooling Heat Pump uses scientific methods to make low-temperature heat energy flow to high-temperature heat energy according to the "inverse Carnot principle", and obtains more heat energy from the air, which has wide adaptability.
How does the Heating and Cooling Heat Pump cycle for cooling and heating?
What is the principle of Heating and Cooling Heat Pump?
Can the Heating and Cooling Heat Pump still operate at an ambient temperature of 0°C?
During heating, the refrigerant (environmentally friendly refrigerant) in the Heating and Cooling Heat Pump host will absorb the low-temperature heat energy in the air through the evaporator, and then convert it into high-temperature heat energy through the compressor, and then transfer the heat energy to the heating circulating water through the heat exchanger. Finally, the heated hot water is transported to the indoor heating terminal for heat dissipation through the water pump, and then returned to the heat exchanger for heating after the heat dissipation, and the process is repeated.
During cooling, the cycle of the Heating and Cooling Heat Pump system is just the opposite, absorbing the indoor heat and transferring it to the outdoors. Air heat exchange, an additional heat exchange program.
Shallow water sources on the earth's surface (generally within 1000 meters), such as groundwater, surface rivers, lakes and oceans, absorb considerable radiant energy from the sun into the earth, and the temperature of water sources is generally very stable. The working principle of Heating and Cooling Heat Pump is to realize the transfer of low-temperature heat to high-temperature by inputting a small amount of high-grade energy (such as electric energy). The water body is used as the heat source of heat pump heating in winter and the cold source of air conditioning in summer, that is, the heat in the building is "taken out" and released into the water body in summer. Because the water source temperature is low, it can efficiently take away the heat, so as to achieve the purpose of indoor cooling of the building in summer; In winter, heat energy is "extracted" from the water source and sent to the building for heating through Heating and Cooling Heat Pump.
The answer is yes, although Heating and Cooling Heat Pumpproducts were mostly used in high temperature areas in the early days, with the continuous development of heat pump technology, air energy heat pump heating can be used in most areas, especially for some low temperature environments. The Heating and Cooling Heat Pump uses technologies such as jet enthalpy to ensure that the Heating and Cooling Heat Pump can operate normally in severe cold climates.
Guangdong JNOD New Energy Technology Co., LTD. has been committed to providing customers with Heating and Cooling Heat Pumps and perfect after-sales service so that customers can invest easily, use them with confidence, and have no worries.
There are 2 different ways an air source heat pump can provide heat in your home: by heating the air in the rooms or by heating the water in the central heating system, but which option is best for your home? We've compared these different heat pumps, to help you find out.
As the name suggests, air-to-water heat pumps use the ambient air outside of a property to heat the water in the central heating system. They are the more frequently seen air source heat pumps on the market, and come with several benefits and disadvantages.
Benefits of an air-to-water heat pump
Air-to-water heat pumps come with several benefits when compared to air-to-air heat pumps.
Compatible with traditional central heating systems
According to the English Housing Survey 2019-2020, 90% of households in the UK have central heating with radiators as their main heat source. That means, unless you're among the select few, you are going to want an air source heat pump that's compatible with your existing central heating system. Air-to-water heat pumps are designed with this very purpose in mind. Air-to-air heat pumps are not compatible.
Easier to install
As the air-to-water heat pumps will generally connect directly to the central heating system they are usually a lot easier to install than air-to-air heat pumps. Installing an air-to-water heat pump in a property with existing central heating is similar to replacing a boiler, whereas installing an air-to-air heat pump would require the installation of air ducts throughout the property.
Not just for heating
Although air source heat pumps are mainly considered for heating properties, that isn't the only thing they do. Air-to-water heat pumps will heat the water in your property for your central heating, but can also be combined with a hot water storage tank to provide hot running water too.
Disadvantages of an air-to-water heat pump
Air-to-water heat pumps don't just come with benefits, there are some disadvantages too.
Air-to-water heat pumps are not cheap. Depending on the size of the unit you need and which manufacturer you pick, you could end up paying more than £10,000 for an air-to-water heat pump, excluding the cost of installation.
In comparison, you can get some air-to-air heat pumps for less than £1,000. Even if the cost of installation is high, you could still spend less on getting an air-to-air heat pump installed than you would on just buying the parts for an air-to-water heat pump.
Requires more space
In addition to the space a hot water storage tank would take up to allow for hot running water, due to radiators being required, air-to-water heat pumps still take up more room in the property than air-to-air heat pumps do. This isn't much of a problem if you already have radiators installed, but to maximize space in a new property air to air heat pumps are the better option.
In what sounds like a much simpler process, air-to-air heat pumps extract heat from the ambient air outside of a property and transfer it to the air inside of a property. If you'd like more detail on how air source heat pumps work, have a look at the following article: What is an air source heat pump?
Benefits of an air-to-air heat pump
There are several benefits to having an air-to-air heat pump rather than an air-to-water heat pump.
Heat and cool
As the air to air heat pumps is essentially air conditioning units that are capable of heating a property, they can also be used to cool a property when the weather is hot. Many manufacturers refer to them as climate control solutions because they aren't just for heating a property, they can cool it too.
Air-to-air heat pumps may require the installation of air ducts throughout the property, but once they have been installed, each room will feel more spacious. This is because there is no need for radiators which take up wall room and floor space. For newer, less spacious properties, air-to-air heat pumps could help you make the most of your space.
As mentioned earlier, air-to-air heat pump units are considerably cheaper than their air-to-water counterparts. Some air-to-water units can be 10 times more expensive than an air-to-air unit, which is something to think about.
Disadvantages of an air-to-air heat pump
Air-to-air heat pumps don't just come with benefits when compared to air-to-water heat pumps, there are some disadvantages too.
Not compatible with traditional central heating systems
If you have an existing central heating system and want to replace a gas boiler with an air-source heat pump, air-to-air heat pumps are not for you. As they only heat the air in a property, they cannot be connected to the central heating system and are completely incompatible.
Higher installation costs
Although like-for-like installation costs for both types of heat pump are generally quite similar, unless you have a property with existing air conditioning ducting, the cost of installing an air-to-air heat pump is likely to be higher as there will be more work to do.
No hot water
Air-to-air heat pumps do not heat the water in a property. This means you will need a secondary source of heat to provide hot running water throughout your home. While this is possible through solar power and other water heating solutions, it is still a separate cost that is avoided when installing an air-to-water heat pump.
Having learned the advantages and disadvantages of these air source heat pumps, you should now be able to make a decision on which would be best suited to your circumstances. However, as there is a lot to consider when getting an air source heat pump installed, we would recommend seeking the advice of a local heating engineer. They can ensure you get the right solution for your home's unique circumstances. Fortunately, we can help you find qualified engineers in your area, who will provide you with free, no-obligation quotes.
Water heating accounts for around 18% of the average home’s energy use. Switching to an energy-efficient heat pump water heater can make a difference on your utility bill and is an essential step in lowering the carbon footprint of your home.
We believe we JNOD are a very good heat pump supplier for you as following reason.
1. Complete Product Range:
JNOD has complete air to water heat pump product ranges, including heat pump water heaters, heating&cooling heat pump and swimming pool heat pump. We can satisfy most residential hot water and space heating need for apartment or single house.
Our All in one heat pump water heater gains the latest CE certificate and A+ ERP label. For some countries, distributor or install company can use them to apply the subsidies from government.
Regard to all in one hot water heat pump:
- If you look for hybrid hot water heat pump, choose the all in one heat pump. It’s a kind of electric + air source heat pump as there is an auxiliary electric heating inside as a backup.
- If there is a solar system, wires can directly connect to inverter, which can provide the electricity needed by heat pump, and then the need of grid can be reduced.
- If you want remote control, options like WiFi and RS485 can be provided.
If you have need of OEM/ODM, welcome to inquire us with the logo and design file you want, we will try our best to help you with better selling.
Air heat pump water heater has low energy consumption (power consumption saves more than 2/3 compared to conventional electric water heaters), high thermal efficiency (heating speed is four times higher than conventional electric water heaters), Environmental protection and energy saving (reduces more than 2/3 compared to conventional electric water heaters) carbon dioxide emissions).
What are the differences between heat pump water heaters and air conditioners?
Why do heat pump water heaters improve the consumer experience?
What is the working process of the heat pump water heater?
The operating mode of the heat pump water heater is very different from that of the air conditioner, which determines the difference in the design concept between the heat pump compressor and the air conditioner compressor. Trouble-free, long-term stable operation of heat pump water heaters Compared to air conditioning systems, there is a big difference in the operating time. The operating time of heat pump water heater systems is much longer than that of air conditioning systems. The operating time of a heat pump water heater depends on the following factors: Air conditioning systems are often used in summer, but water heaters are mass-produced and run particularly long in winter. The time for heating a water tank in winter is several times as long as in summer, so it is necessary to confirm the operating mode of the heat pump water heater in winter.
According to statistical calculations, 2/3 of the service life of the heat pump water heater is consumed in winter. Since the water outlet temperature of the heat pump is over 55°C, the temperature of the water tank decreases when using. The liquefaction temperature is the main factor affecting the service life of the compressor. Under the condition of simultaneous operation, the total load of the compressor in the heat pump water heater is much higher than that of the compressor in the air conditioning system. The main motivation for consumers to buy water heaters with heat pump is energy saving and comfort. Consumers will thus consume more water, which also extends the working time of the heat pump. If the heat pump water heater is used for heating and service water applications, it can run for a long time during the heating period. From the combination of the above factors, it is evident that the main motor of the heat pump water heater will develop in the direction of miniaturization, and the actual operating time will be greatly extended.
A water heater with compression heat pump mainly consists of evaporator, compressor, condenser and expansion valve. Thermal Circular Process Throttling → Re-evaporation, whereby heat from the environment is transferred to the water.
Guangdong JNOD New Power Technology Co., LTD. sales team has extensive experience in overseas markets. We provide sincere and professional services, including OEM/ODM/project services, technology support, market analysis, use of design and assembly of installation. We have provided marketing consulting services and business solutions to customers from over 40 countries.